Nano Rework station
Ref. NASE-B
www.jbctools.com
Steady Nano
Twee zers ........................ 1 unit
Ref. NP105-B
Manual .............. 1 unit
Ref. 0016767
Metal Brush ..... 1 unit
Ref. CL2466
Brass Wool ....... 1 unit
Ref. CL6210
Power Cable ..... 1 unit
Ref. 0009417 (
100/120V )
0009401 (230V)
Nano Rework station
Ref. NASE-B
Packing List
The following items should be included:
Control Unit ................... 1 unit
Ref. NAE-1B (120V)
NAE-2B (230V)
NAE-9B (100V)
Nano Handle ................. 1 unit
Ref. NT105-A
Cartridge
dispenser Case ............ 1
unit
Re f. 00115 6 8
Cartridges
included
Ref. C105 -101 x1
C105-103 x1
C105-105 x2
C105-107 x1
C10 5 -112 x 1
C10 5 -113 x 2
Allen key ........................ 1 unit
Ref. 009848
Tool Holder .................. 2 units
Ref. 00166 06
2
www.jbctools.com
Nano Handle
Ref. NT105-A
Steady Nano
Twee zers
Ref. NP105-B
Features
Tool extension cord (1m)
Ref. A1205
Pedal
Ref. P-005
Accessories not included:
Puts the tool into
hibernation mode
Process
Screen:
2.8 Color TFT
Cartridge
extractor
and tip aligner
Brass wool
Metal brush
Stand:
Intelligent Heat
Management
Cable collector
Power socket
Main switch
Equipotential
connector
Pedal connectors
USB-B
connector
RJ12
connector
for Robot
USB-A connector
www.jbctools.com
3
For Nano
Soldering Iron
Replace the tip cleaning system:
- Brass wool
- Inox wool
- Metal brush
For Nano
Tweezers
Tool Holder assembly Cable assembly
Changing the tip cleaning system
1
2
4
1
2,5
Round Chisel Bevel KnifeRound
bent
High thermal
performance
Stainless
steel chisel
Changing grips
Compatible cartridges
The NASE-B works with C105 cartridge range. Find the model
that best suits your soldering needs in www.jbctools.com
1. Push the grip with
the tabs onto the
handle.
2. To remove the tabs,
hold the grip and
pull them out.
Use a pliers if
necessary.
Nano handle
Grip for NT105-A
Changing cartridges
Save time and change cartridges safely without having to switch the station off.
Removing
Inserting Aligning
Place the cartridge in the slot
as shown and pull the handle
to remove it.
Push the cartridge into the
handle to the mark*.
Use the holes to rotate
the cartridges for a proper
alignment.
*Important
It is essential to insert the
cartridges as far as the mark
for a proper connection.
Mark
1
2
www.jbctools.com
5
Tool in the stand
Actual Temp. 180ºC
Delay to hibernation: 29:30
Port
2
NT105
17:14
Sleep
2
17:14
Hibernation
Actual Temp. 25ºC
NT105
Port
2
350
ºC
Port
2
Power
45%
17:14
Selected 350ºC
NT105
Operation
The JBC Exclusive Heating System
Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.
3. Hibernation
1. Wor k
2. Sleep
When the tool is lifted from the
holder the tip will heat up to
the selected temperature.
When the tool is in the holder,
the temperature falls to the
preset Sleep temperature.
After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
Tools Menu:
· Set temperature limits
· Select temperature levels
Tools Menu:
· Set Sleep temperature
· Set Sleep delay
(from 0 to 9 min or no Sleep)
Tools Menu:
· Set Hibernation delay (from 0
to 60 min or no Hibernation)
Long time in
the holder
6
350
ºC
Port
2
Power
45%
Temp. Levels
NT105
250 350 380
17:14
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
System notifications (Status Bar)Menu Options
Station
Information
Power
indicator
Tool in use
Work Screen
Status bar
The NASE-B offers an intuitive user interface which provides quick access to station parameters.
Original PIN: 0105
Change port
Displayed if
temperature
levels are
activated
Station Tools Counters
ResetGraphicsPeripherals
Press INFO for each parameter description.
www.jbctools.com
7
Power (%)
Port 1 - NT105
450
400
350
300
250
150
100
50
200
Power Temp
17:14
By pressing Graphics in the main MENU, temperature and power figures in real time
are displayed for each port. This helps you decide which tip to use to obtain the best
quality solder joints.
Process analysis
Export graphics
Insert a USB flash drive into the USB-A connector
to save your soldering process in csv format.
Graphics
Temperature
Power (%)
See other
port graphic
8
Soldering Net
Remotely manage and monitor as many stations as your PC can handle.
Functions:
- Set all the station parameters from your PC.
- Organize groups of stations and set all their parameters at the same time.
- Store specific configurations for later uses.
- Analyze the soldering graphics of the stations on your PC and export them.
1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html
2. Connect the stations via USB-B connector and the PC will automatically detect them.
3. The notification will be displayed on the station.
any JBC
station
USB Hub
JBC
Manager
Software
www.jbctools.com
9
RS-232
connection
1. Connect the tool to the station port.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapater available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot’s commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html.
Manage and monitor the station using a Robotic system.
Working with Robots
Robot Control Unit
Update the station software
1. Download the JBC Update File from
www.jbctools.com/software.html and save
it on a USB flash drive. Preferably one with no
other files.
2. Insert the USB flash drive to the station.
The icon is diplayed while updating.
JBC
Update File
10
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
1. Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2. Press the new fuse into the fuse holder
and replace it in the station.
Fuse holder
Fuse holder
Fuse
Clean periodically
www.jbctools.com
11
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
Safety
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station is
turned off. Handle with care.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
12
产品中有害物质的名称及含量
有害物质含量表
部件名称
有害物质
铅(Pb) 汞(Hg) 镉(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
烙铁头 O O O O O O
手柄 O O O O O O
电源线 O O O O O O
主机 O O O O O O
电源插座 O O O O O O
保险丝 O O O O O O
主开关 O O O O O O
电位连接 X O O O O O
变压器 O O O O O O
线路板 X O O O O O
O 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。
X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
www.jbctools.com
13
Exploded View
14
www.jbctools.com
15
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
0016767-0917
Specifications
NASE-1B 120V 50/60Hz. Input fuse: 0.5A. Output: 8.5V
NASE-2B 230V 50/60Hz. Input fuse: 0.2A. Output: 8.5V
NASE-9B 100V 50/60Hz. Input fuse: 0.5A. Output: 8.5V
- Weight: 2,5 kg (5.40 lb)
- Dimensions: 170 x 90 x 135 mm (6.70 x 3.54 x 5.31 in)
- Output Peak Power: 14W per tool
- Temperature Range: 90 - 450°C (190 - 840ºF) ±5%
- Idle Temp. Stability (still air): ±3 ºC (±5.5 ºF)
- Tip to ground resistance: <2 ohms
- Ambient operating temp: 10 - 40 ºC (50 - 104 ºF)
- USB-A / USB-B / Pedal connectors
- RJ12 connector for Robot
Complies with CE standards.
ESD protected.
www.jbctools.com
Loading...