
is a registered trademark of Schoenberger Germany Enterprises GmbH & Co. KG • Zechstraße 1 – 7 • 82069 Hohenschäftlarn
Overview of functions ..................................................................................................................................... 2
Technical data and scope of delivery
.........................................................................................................2
Programming and setting
..............................................................................................................................3
Contact information
.........................................................................................................................................4
1-channel hand-held radio transmitter,
type TDRC-01
The signatory declares that the hand-held radio transmitter conforms with the Guidelines and Directives according to
R&TTE 1999/5/EC.
Model: TDRC - 01
DIN EN 301489-3:2013-12, DIN EN 300220-3
Schoenberger Germany Enterprises GmbH & Co. KG
Zechstraße 1-7
82069 Hohenschäftlarn
WEEE Reg. No. DE 41060608 for: JAROLIFT
®
™
Rev._07.2014
compliant
2002/95/EC
RoHS
Michael Mayer
Managing Director

2
Function overview
Remote indicator light
OPEN
STOP
CLOSE
Technical data and scope of delivery
Technical data:
Power supply: 3 Volt
Battery model: CR2430
Operating current: 12 m A
Protection: IP 30
max. authorised permissible ambi-
ent temperature:
-20°C to +60°C
Encoding the radio: Rolling code
Radio frequency: 433.92 MHz
Channels: 1-channel
Compatibility: Compatible with all TDR wireless motors and receivers, as of production date 03/2010
Once you have unpacked the unit, compare the content of the
package with the information provided in these instructions about
the scope of delivery:
1. Hand-held transmitter TDRC-01
2. Wall bracket
Operating Instructions
1
2

3
Programming and setting of the hand-held radio transmitter
Technical data and scope of delivery
1 First, set the respective radio receiver or wireless motor to the “TEACH” mode and follow the applicable instructions.
2 Within 10 seconds, press the OPEN and CLOSE button on your hand-held transmitter simultaneously and then press the STOP button briey.
Next, press the STOP button.
If the “TEACH” process was successful, it is acknowledged by the brief vibration of the tubular motor that is attached to the radio receiver, or by
the vibration of the wireless motor Now you can use the OPEN/STOP/CLOSE button to activate the motor on your transmitter.
Follow the instructions
in order to set the receiver in
“TEACH” mode
Press the OPEN/CLOSE
button simultaneously,
subsequently pressed the
STOP button.
Motor vibrates
Note:
If you would like to operate additional receivers with this transmitter, proceed as described above.
Each button must be depressed for approx. 1 second!

is a registered trademark of Schoenberger Germany Enterprises GmbH & Co. KG • Zechstraße 1 – 7 • 82069 Hohenschäftlarn
If you have any concerns about our product or your unit is faulty, please contact us in writing or send an email to the following
address:
is a registered trademark of
Schoenberger Germany Enterprises GmbH & Co. KG
Zechstraße 1 – 7
82069 Hohenschäftlarn
Tel.: 08178 / 932 932 / 3,425
Fax: 08178 / 932 939 / 425
info@jarolift.de
www.jarolift.de
Subject to technical changes, misprints and errors.