ZI-8
WARNING: Improper installation could result in damage to the
amplifier. Read all instructions before installation.
Introduction
The ZI-8 provides a convenient way to connect up to 8 pairs of
speakers in parallel to one amplifier/receiver. If the speakers are
connected directly to the ZI-8 the level of all speakers will be controlled by the amplifiers volume control.
Installing volume controls (AT-1A or AT-101) between the ZI-8 and
the speakers, as shown in the schematic below, provides the ability
to control the volume individually for each speaker pair.
SPECIFICATIONS:
Accommodates 8 pairs of speakers
Automatic Impedance Protection (minimum 4 ohm).
Power Handling: 180 Watts Audio
Heavy Duty Screw Terminal Connectors accept up to 12 gauge
of wire
Size (LxHxW): 12 x 5 x 6cm / 12 x 2 x 2½in
Weight: 0,9kg / 2lb