Installation Instructions for
Back-to-Back Door Handle Mount
H20, H21, H60, H61
& BB Series
Cap Screw Plastic Handle Escutcheon
Spacer
Washers Rubber Drill
Washer Hole
Part/ Product
Quantity Number Size
Door Handles (2) Varies
Screws (2) 30817-4 3/16”x 3-1/2”
Metal Washers (4) 30817-5 7/16”
Plastic Spacers (2) 30817-2 15/16”x 7/16”
Rubber Washers (4) 30817-1 1-15/16”
Escutcheons (4) 30756
Slotted Hex Nut (2) 30824-6
Caps (4) 4844
Slotted
Hex Nut
Cut-Away
View of Door
1. Mark center of holes for mounting screws (6” centers). Align handle to door to insure accuracy.
2. Drill two 11/32” holes through door/glass.
3. Put small metal washers and spacer onto long screw in the following order: screw-washer-spacer-washer.
4. Put large rubber washer on base of escutcheon (for both handles).
5. Slide long screw (with fittings) into the top handle post, then through escutcheon and rubber washer
before pushing screw assembly through the door.
6. Slide other washer with escutcheon onto screw, then other handle post.
7. Loosely attach hex nut through handle onto screw.
8. Repeat procedure for bottom post.
9. Tighten screws.
10. To finish, snap caps over the four screw heads.
JACLO INDUSTRIES Phones: 908-653-4433 • 800-852-3906
129 Dermody Street Fax: 908-653-1717 • 800-852-4133
Cranford, NJ 07016 Website: www.jaclo.com
Installation Instructions
for Door Handle Mount
H20/H21, H60/H61 FM Series
Cap Screw Handle Escutcheon
1. Mark center of holes for mounting
screws (6” centers). Align handle to
door to insure accuracy.
Product
Part Quantity Number Size
Door Handle (1) Varies
Screws (2) 30817-3 #12 x 1-3/4”
Escutcheons (2) 30756 Brass Wood Screw
Caps (2) 4844
2. Drill two 1/8” diameter holes into
door.
3. Slide 3” screw into the top handle
post, then through escutcheon into
plywood or wood stud.
DO NOT TIGHTEN.
4. Repeat procedure for bottom post.
5. Make sure that the bar is aligned
properly before tightening screws.
6. To finish, snap caps over the two
screw heads.
Cut-Away
View of Door
JACLO INDUSTRIES Phones: 908-653-4433 • 800-852-3906
JACLO INDUSTRIES Phones: 908-653-4433 • 800-852-3906
129 Dermody Street Fax: 908-653-1717 • 800-852-4133
129 Dermody Street Fax: 908-653-1717 • 800-852-4133
Cranford, NJ 07016 Website: www.jaclo.com
Cranford, NJ 07016 Website: www.jaclo.com