R24
Standard Features
Power/Connections
• 10 gallons per hour
• 1200 - 2 1/2” glasses per hour
• 3 precision dispensers for detergent,
rinse additive, and sanitizer
• 208-230/60 HZ / single phase / 20
amps total load
• Automatic conveyor system
• Wash and rinse temperature gauges
• Powerful 3/4 HP wash motor
• 100% fresh water rinse which
eliminates rinse water contamination
problems
• Low water protection on wash tank
heating element
Performance/Capacities
• Single switch operation
• Removable end plugs on wash and
rinse arms for easy cleanability
• Heavy duty stainless steel construction
• Interchangeable upper and lower
wash and rinse arms
• Automatic fill during cycle
• Stainless steel main frame
• Adjustable bullet feet
• Optional waste accumulator tray
• Available in clockwise or counter
clockwise rotation—must specify
Electrical Requirements
Electric Tank Heat KW
8 2.7
20
0
23
Wash Pump Motor Horsepower 3/4
Water Requirements
Gallons per Hour (Hot)
Flow Pressure (PSI) 15-25
Flow Rate G
Inlet T
Inlet Temperature °F (Cold) 70
aterline Size I
W
Drainline Size (Minimum) (Inches) 2
Sanitizers A
Sodium Hypochlorite 50 PPM
Iodiphor 12.5 PPM
PM 2.6
F (Hot)
emperature
°
S (Minimum) (Inches) 1/2
P
vailable
3.3
10
130
Operating Capacity
Glasses per Hour (2 1/2”)
Operating Cycle (Seconds)
Total Cycle 120
Operating Temperatures
F
ash (Minimum)
W
F
°
Rinse
Tank Capacity (Gallons) 3.0
Wash Pump Capacity (GPM) 55
°
1200
130
7
Dimensions (Inches)
idth
W
Depth 25 1/4
Height 39
all Clearance (Minimum)
W
Inside Clearance (Height) 10
Shipping W
0
Shipping Size (Inc
Width 30
Depth
Height
eight
(Lbs.)
hes)
25 1/4
210
3
42
2
Glasswashers
0
25 1/4"
5 1/4"
26 1/4"
1 1/2"
7 1/2"
39"
6"
10" Vertical
Clearance
14 3/4"
12 3/4"
18 11/16"
5"
30"
A
B
C
D
Short Form Specifications
Item No. _______________
Unit shall be Jac
teristics to be 208 or 230 volts / 60 cycles / single phase operation with a 2 minute
automatic cycle using 10 gallons of 70°F. minimum final rinse water per hour.
Stainless steel construction to include frame, wash tank, top and side panels. A 3/4
P motor mounted to a cast iron pump with a stainless steel impeller shall be
H
mounted to the machine frame. As standard the unit shall include:
• Capacity of 1200 2 1/2" glasses per hour.
• Gravity drain
• Electro-mechanical components.
• Automatic conveyor system.
• Automatic fill
• Three (3) chemical dispensing pumps
• Available in either clockwise or counter-clockwise rotation.
• Single switch operation
Unit shall be NSF Certified as well as UL & CSA Listed.
kson model R24 chemical sanitizing glasswasher. Electrical charac-
5-1/4”
25-1/4”
12-3/4”
GlasswashersR24
25-1/4”
1-1/2”
14-3/4”
7-1/2”
30”
18-11/16”
5”
10” vertical
clearance
LEGEND:
Water inlet 1/2” I.P.S. cold
–
A
B – Water inlet 1/2” I.P.S. hot
C – Drain 2” nominal, 5” from floor
D – Standard wall clearance 2”
All dimensions in inc
All vertical dimensions are +/- 1/2” from
floor due to adjust
hes.
able bullet feet.
ppro
A
ximate T
otal
Load Amps
208/60/1 18
230/60/1 19.4
39”
6”
.jacksonmsc.com
www
1-888-800-5672
610-002-6
7
All specifications subject to change without notice.
0
6-5
7B 3/05