Jabra Freespeak BT200 Quick Start Manual
1. Insert the headset fully into its charging cradle.
2. Plug one end of the AC power adapter into the
charging cradle and the other end into an electrical
wall outlet.
3. Charge your headset for approximately 2 hours
or until the blue indicator light goes out.
IMPORTANT: The blue indicator light will be
on while charging and will turn off when charging
is complete.
3 “Pair” to a Bluetooth phone
1. Ensure headset is off.
2. Press until you see a solid blue light, then
release*.
3. Follow your Bluetooth phone’s instruction guide to
start the pairing process. Typically, the steps involve
going to a “setup”, “connect”, or “Bluetooth” menu
and then selecting the option to “discover” a
Bluetooth device.
4. Your phone will find the “JABRA BT200” headset
and ask if you want to pair with it. Confirm this.
5. Enter passkey or PIN = 0000 (4 zeros).
IMPORTANT: If pairing was successful, the blue
indicator light will briefly flash rapidly before going
back to flashing every 3 seconds. If unsuccessful,
the light remains solid, and you’ll need to reattempt
pairing (see steps 3–5 above).
* If you have a Bluetooth phone that supports
the hands-free Bluetooth profile, see
“Enhanced features” section for alternative
pairing instructions. Phone-specific pairing
instructions can be found online at
www.jabra.com/fscs.
Headset Indicator
Light (Blue LED)
Multi-Function
Button
Volume Control
Button
MiniGel™
BEFORE USING YOUR HEADSET
1 Check phone compatibility
This version of FreeSpeak is compatible with most
Bluetooth phones (version 1.1 or higher) with headset
or hands-free profile. Ensure that your phone has
Bluetooth capability by either visiting your phone
manufacturer’s web site or our web site. (JABRA also
provides FreeSpeak versions for most non-Bluetooth
phones).
2 Charge FreeSpeak
FreeSpeak is rechargeable and must be charged
before use.
Charging
Cradle
Fig.1
IMPORTANT! READ THIS FIRST
JABRA
®
FreeSpeak™ BT200 QUICK START GUIDE
For Most Bluetooth™Phones
© 2003 JABRA Corporation, a GN Netcom
company. All rights reserved. Patents pending.
JABRA and the JABRA logo are registered
trademarks of JABRA Corporation in the USA and
may be registered in other countries. FreeSpeak
and MiniGel are trademarks of JABRA. Bluetooth
is a trademark owned by Bluetooth SIG, Inc. and
is used by JABRA under license. Design and
specifications subject to change without notice.
The JABRA FreeSpeak headset may not be
authorized for use in some countries.
500-00324-00
English
1
QUICK START GUIDE
F
F
O
O
R
R
B
B
L
U
L
E
U
T
O
E
T
O
P
P
H
T
O
H
T
O
JABRA
E
E
N
N
O
O
H
H
S
S
1
2
6 Making a call
If FreeSpeak is not already on, turn it on now.
Using phone’s keypad
1. Dial number on keypad.
2. Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up
voice tags on your phone)
1. Press and release . You’ll hear ONE short
beep while doing this.
2. You’ll then hear a tone; then say the name of
the person you wish to call.
7 Ending a call
• Press and release OR
• End call from phone’s keypad.
8 Answering a call
• After you hear the ring tone, press and release
OR
• Answer the call with your phone’s keypad, then
transfer the call to the headset by pressing and
releasing .
9 Call-waiting
• Use standard method from your phone’s keypad
(recommended) OR
What you see
What you hear
Flashes
every
second
Flashes
every 3
seconds
Quick series of TWO
tones — low to high
pitch (when active
mode starts)
Quick series of TWO
tones — high to low
pitch (when standby
mode starts)
Status
Active Mode
• Call in progress
• Up to 3 hours of
talk-time*
Standby Mode
• Waiting for call
• Up to 100 hours
of standby time*
* Depending on phone type and usage.
BASIC OPERATIONS
4 Turning headset on/off
Press the multi-function button for 3 to 5 seconds
until you see a burst of flashes on the blue indicator
light, then release. The indicator light will flash while
the power is on.
If you are already wearing the headset, you’ll hear a
quick series of FOUR tones when turning the headset
on or off. When turning the headset on, the tones will
go from low to high pitch, and when turning off, the
tones will go from high to low.
IMPORTANT: Do not hold the button down
too long (more than 3 to 5 seconds) when turning
the headset on or else it may go into pairing
mode, and the blue indicator light will turn solid.
If that happens, turn off the headset, wait 3 to 5
seconds, and repeat process for turning the
headset on.
5 Choosing wearing preference
FreeSpeak is ready to wear on the right ear. If you
prefer the left, gently rotate the MiniGel 180°.
• Press and release once to switch between
calls (some phones do not support this headset
feature).
IMPORTANT: Do not hold the button down
too long when making, ending, or answering a
call. This should only be a quick tap.
10 Status indicators
JABRA®FreeSpeak™ BT200 QUICK START GUIDE
For Most Bluetooth™Phones
2
www.jabra.com
JABRA
Loading...