Warning
TO PREVENT FIRE OR SHOCK HAZARD , DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED AND THERE ISNO BLADE EXPOSURE .TO PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important Safety Instructions
1.) |
Read these instructions . Keep these instructions . Follow all instructions. Heed |
|
all warnings. |
2.) |
Do not use this apparatus near water. |
3.) |
Clean only with dry cloth. |
4.) |
Do not block any ventilation openings.Install in accordance with themanufacturer's |
|
instructions. |
5.) |
Do not install near any heat sources such as radiators, heaters, stoves, or other |
|
apparatus(including amplifiers) that produce heat. |
6.) |
Do not defeat the safety purpose of the polarized or grounding-type plug.A |
|
polarized plug has twoblades with one wider than the other. A grounding type plug |
|
has two blades and a third grounding prong. The wide blade or the third prong |
|
is provided for your safety.If the provided plug does notfit into your outlet, ask |
|
an electrician for replace the obsolete outlet. |
7.) |
Protect the power cord from being walked on or pinched particularly at plugs, |
|
convenience receptacles and the point where they exit from the apparatus. |
8.) |
Only use attachments / accessories specified by the manufacturer. |
9.) |
Unplug this apparatus during lightning storms or when unused for long |
|
periods of time. |
10.) |
Refer all servicing to qualified service personnel. Servicing is required when the |
|
apparatus has been damaged in any way,such as power-supply cord or plug is damaged, |
liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.
11.) Use only with the cart, stand, tripod,bracket,or table specified by the manufacturer,or sold with the apparatus . When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12.) The AC adaptormust not be exposed to dripping or splashing and noobjects filled with liquids, such as vases, shall be placed on apparatus.
13.) The AC plug is used as a disconnect device and it must remain readily accessible readily accessible during intended use. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.
14.) The battery must not be exposed to excessive heat such as sunshine, fire, etc.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Preparation For Use
Unpacking And Set Up
Remove the radio from the carton and remove all packing material from the radio.Save the packing material,if possible,in case the radio ever needs to be serviced or transported.The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit.
Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual.
Place your radio on a level surface such as a table,desk or shelf,convenient to an AC outlet,out of direct sunlight,and away from sources of excess heat,dirt,dust,moisture, humidity, or vibration.
Unwind the Line cord connecting the AC adapter and extend it to its full length.The FM antenna is built in to this cord.It must be fully extended to provide the best FM reception.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls.These'feet'are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture.However certain types of oil based furniture polishes, wood preservatives,or cleaning furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at
hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber'feet'before you place the product on fine wooden furniture.
Power Source
This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always'live'. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a 'live' AC outlet at all times.
Important Notes
• Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as:electric heaters, on top of other stereo equipment that radiates theat,
places lacking ventilation, dusty areas, places subject to constant vibration and/or humid or moist areas.
•Operate controls and switches as described in the manual.
•Before turning on the power,make certain that the AC adapter is properly installed.
•When moving the set, be sure to first disconnect the AC adapter.
What Inside
• CKS507 clock radio x 1 • User Manual x 1 |
• AC Power Adapter 110V-240AC |
|
50/60Hz,DC 5V x1 |
Location of Controls and Indicators
FRONT PANEL
1 |
2 |
3 |
4 |
5 |
6 |
7 |
TOP PANEL
|
|
11 10 |
14 |
16 |
|
8 |
|
|
|
VOL+ |
16 |
|
TIME |
|
|
15 |
|
|
SET |
|
|
||
9 |
AL1 |
AL2 |
|
|
18 |
STO. |
MEM. |
|
|
||
12 |
|
SLEEP |
ZZ Z |
|
17 |
|
TIME ZONE |
VOL- |
|||
|
|
12 |
13 |
19 17 |
|