Page 1
i-tec MySafe USB 3.0, External case for hard drive 2.5
i-tec MySafe USB 3.0, external case for
hard drive 2.5" 9.5mm SATA I/II/III
HDD/SSD, USB 3.0 interface, Data
transfer rate up to 5 Gbps, Aluminium
housing
PRODUCT DESCRIPTION
i-tec MySafe USB 3.0, external case for connecting 2.5" SATA disks up to 9.5 mm high to your PC, laptop, TV or
other multimedia device through USB 3.0 interface. You can use the external case for data migration, backup or
data recovery. USB 3.0 interface with speeds up to 5 Gbps. The solid aluminium construction ensures an
effective heat dissipation and hard drive protection. HDD installation is very simple, it takes you just few
minutes.
In case of installation problems, technical difficulties or incorrect device functionality, first check
the possible solution in the FAQ tab.
Long product description: i-tec MySafe USB 3.0, external case for hard drive 2.5" 9.5mm SATA I/II/III HDD/SSD,
USB 3.0 interface, Data transfer rate up to 5 Gbps, Aluminium housing
PRODUCT FEATURES
External USB 3.0 enclosure for all 2.5” SATA I / II / III hard disk drives or SSD up to 9.5 mm high
Max. HDD volume no limitation
Solid Aluminum body for excellent heat dissipation and hard drive protection
Interface USB 3.0
Transfer rate up to 5 Gbps
Plug & Play
Easy-to-access front power button
Active LED to indicate power status and HDD status
Power supply: 5V, 900 mA
OS Windows 7/8/8.1/10, Mac OS X and higher, Linux, Android, Chrome
Product size 125 x 78 x 24 mm
Product weight 145 g
Package size 178 x 128 x 46 mm
Package weight 295 g
System requirements
i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz
Page 2
Hardware requirements: notebook or tablet with one available USB-A port
Operating system: Windows 7/8/8.1/10, Mac OS X and higher, Linux, Android, Chrome
Package contents
External Enclosure for 2.5" HDD/SSD
USB 3.0 cable (60 cm)
Rubber stickers
Set of screws for mounting
Screwdriver
User’s Guide
SPECIFICATION
Part Number Product Description & EAN
U3MYSAFE025 i-tec MySafe USB 3.0, External case for hard drive 2.5
EAN: 8595611702556
Hardware
Bus type USB-3.0
Ports/Connectors
System Requirements
Hardware Hardware requirements: notebook or tablet with one available USB-A
port
Operating system Windows 7/8/8.1/10 (32/64 bit)
Mac OS X
Chrome OS
Linux Ubuntu 14.04/16.04
Android 5
Android 6, 7, 8Windows 10 - Automatic installation of OS drivers. Other
operating systems - manual driver installation. Firmware updates
automatically.
Other features
Colour Space Grey
Housing Material Aluminium
Product Dimensions 125 x 78 x 24 mm
Product Weight 145 g
Package Weight 295 g
Packaging Dimensions (LxWxH) 178 x 128 x 46 mm
Support
Warranty period 2 years
Technical support lifetime
Package contents
For further information regarding setup or for answers to FAQ’s, please visit our website i-tec.cz. Specifications
are subject to change without notice.
i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz
Page 3
Updated 7.12.2018
Powered by TCPDF (www.tcpdf.org)
i-tec Technologies s.r.o. 3/3 https://www.i-tec.cz
Loading...