i-tec U3HUB445 User Manual

i-tec USB 3.0 Charging HUB 4 Port + Power Adapter

i-tec USB 3.0 Charging HUB 4 Port with
power adapter, 1x USB 3.0 charging port,
ideal for laptop ultrabook tablet PC,
Windows Mac Linux

PRODUCT DESCRIPTION

i-tec USB 3.0 Charging HUB 4 Port + Power Adapter is an ideal companion for everybody who does not have
enough USB ports in his/her notebook, ultrabook or PC and who has to constantly connect and disconnect
his/her favorite USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3 players,
printers, etc.

This HUB offers 4 USB 3.0 ports with the Plug & Play function and standard USB charging – the HUB will
automatically detect connected equipment for USB charging. The port placed next to the LED also supports
charging according to specification BC 1.2, e.g. for the iPad or Samsung tablet. The USB 3.0 interface is
important mainly for data transfers from USB 3.0 memory cards and flash disks which will use its high transfer
speed most. The advantage is included external power adapter which you can use for backing up data on
external hard drives or for connecting high power consumption devices which are powered directly from the
USB port.

This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer
and immediately you can start using it. This HUB has a built in overcurrent protection of your computer in case
of short connection on the peripheries. The interface is compatible with USB 2.0.

In case of any problems with installation, technical difficulties or faulty functionality of device find
the possible solution in FAQ bookmark first.

PRODUCT FEATURES

4x USB 3.0 port for connecting USB equipment, of which 1x USB 3.0 port for charging as per the USB-IF
specification (BC 1.2)
1x USB 3.0 cable for connecting the HUB to a notebook / PC
Transfer rate up to 5 Gbps
The USB charging detection mechanism for mobile devices
Plug & Play function
Overload and overcurrent protection
LED diode
Power adapter: input AC 100-240 V, 50-60 Hz, 0.5 A; output DC 5 V, 2 A
OS Windows 7/8/8.1/10, Mac OS X, Linux, Android, Chrome

i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz

Product dimensions 133 x 60 x 27 mm
Product weight 97 g
Packaging dimensions 230 x 112 x 56 mm
Packaging weight 352 g

SYSTEM REQUIREMENTS

Hardware requirements Notebook / PC with one available USB port Operating system Windows 7/8/8.1/10, Mac
OS X, Linux, Android, Chrome

PACKAGE CONTENTS

i-tec USB 3.0 HUB 4 Port
USB 3.0 cable type A/B (90 cm)
Power adapter (DC cable 115 cm)
User's Guide

SPECIFICATION

Part Number Product Description & EAN

U3HUB445 i-tec USB 3.0 Charging HUB 4 Port + Power Adapter

EAN: 8595611701573

Hardware

Bus type USB-3.0

Ports/Connectors

USB 3.0 TYPE A 4

DC POWER ADAPTER JACK 1

System Requirements

Hardware Hardware requirements Notebook / PC with one available USB port

Operating system Windows 7/8/8.1/10 (32/64 bit)

Mac OS X
Chrome OS
Linux Ubuntu 14.04/16.04
Android 5
Android 6, 7, 8Windows 10 - Automatic installation of OS drivers. Other
operating systems - manual driver installation. Firmware updates
automatically.

Other features

Colour Black

Housing Material Plastic

Product Dimensions 133 x 60 x 27 mm

Product Weight 97 g

Package Weight 352 g

Packaging Dimensions (LxWxH) 230 x 112 x 56 mm

Support

Warranty period 2 years

Technical support lifetime

i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz