i-tec U3CHARGEHUB7 User Manual

i-tec USB 3.0 Charging HUB 7port + Power Adapter 36 W

i-tec USB 3.0 Charging HUB 7port with
power adapter 36 W, 7x USB 3.0 charging
port, ideal for laptop ultrabook tablet PC,
Windows Mac Linux

PRODUCT DESCRIPTION

This HUB offers seven USB 3.0 ports with the Plug & Play function and with standard USB charging - the HUB
automatically detects whether a device for USB charging is connected. As this HUB is equipped with seven USB

3.0 ports, it can charge up to seven devices at a time. The USB 3.0 interface is especially important for data
transfers from USB 3.0 memory cards and flash drives, where its high transfer rate is most useful. An external
power adapter is included in the package to guarantee stable HUB performance and charging from the USB
ports, providing up to 10 W of charging power for each port.

The individual HUB ports can be switched on/off by the appropriate switch, saving you HUB consumption while
increasing the charging input power on the ports you leave on.

This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer
and immediately you can start using it. This HUB has a built-in overcurrent protection of your computer in case
of short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.

The HUB is installed automatically from the system and does not require any drivers. Connect the AC adapter
connector to the HUB and the AC adapter to a 230 V outlet. Then connect the HUB via the USB cable to a free
USB port (USB 3.0, 2.0 or 1.1 standard) on your laptop/PC and follow the instructions on the screen. The HUB
will be installed and displayed in the Device Manager as "General USB Hub" and "General USB SuperSpeed
Hub".

Long product description: i-tec USB 3.0 Charging HUB 7port with power adapter 36 W, 7x USB 3.0 charging port,
ideal for laptop ultrabook tablet PC, Windows Mac Linux

PRODUCT FEATURES

1x USB 3.0 port for connecting to the host device
7x USB 3.0 port
Charging power of the USB ports up to 10W
1x Power input (DC 12V/3A)
On / Off switches for individual USB ports

i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz

LED indicators
USB 3.0 cable from type A to type B (100cm)
Surge and overcurrent protection
OS: Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OS
Product Dimensions: 115 x 53 x 24 mm
Product Weight: 125g
Package Dimensions: 139 x 117 x 55mm
Package Weight: 448g

SYSTEM REQUIREMENTS

Hardware Requirements:

Device with an available USB-A port

Operating System:

Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OS

SPECIFICATION

Part Number Product Description & EAN

U3CHARGEHUB7 i-tec USB 3.0 Charging HUB 7port + Power Adapter 36 W

EAN: 8595611702938

Hardware

Bus type USB-3.0

Ports/Connectors

USB 3.0 TYPE A 7

DC POWER ADAPTER JACK 1

System Requirements

Hardware Hardware Requirements: Device with an available USB-A port

Operating system Windows XP / Vista / 7 / 8 / 8.1 / 10

macOS X
Linux
Chrome OS R51 or later

Power Supply

Input Current 1.3 A

Input Voltage AC 100-240 V

Output Current 3 A

Output Voltage DC 12 V

Power Output 1 port max 10 W, HUB max 36 W

Other features

Colour Space Grey

Housing Material Aluminium

Product Dimensions 115 x 53 x 24 mm

Product Weight 125 g

i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz