i-tec U3CHARGEHUB10 User Manual

i-tec USB 3.0 Charging HUB 10 port + Power Adapter 48 W

i-tec USB 3.0 Charging HUB 10 Port with
power adapter 48 W, 10x USB 3.0
charging port, ideal for laptop ultrabook
tablet PC, Windows Mac Linux

PRODUCT DESCRIPTION

This HUB offers ten USB 3.0 ports with the Plug & Play function and with standard USB charging - the HUB
automatically detects whether a device for USB charging is connected. As this HUB is equipped with ten USB 3.0
ports, it can charge up to ten devices at a time. The USB 3.0 interface is especially important for data transfers
from USB 3.0 memory cards and flash drives, where its high transfer rate is most useful. An external power
adapter is included in the package to guarantee stable HUB performance and charging from the USB ports,
providing up to 10 W of charging power for each port.

The individual HUB ports can be switched on/off by the appropriate switch, saving you HUB consumption while
increasing the charging input power on the ports you leave on.

This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer
and immediately you can start using it. This HUB has a built-in overcurrent protection of your computer in case
of short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.

The HUB is installed automatically from the system and does not require any drivers. Connect the AC adapter
connector to the HUB and the AC adapter to a 230 V outlet. Then connect the HUB via the USB cable to a free
USB port (USB 3.0, 2.0 or 1.1 standard) on your laptop/PC and follow the instructions on the screen. The HUB
will be installed and displayed in the Device Manager as "General USB Hub" and "General USB SuperSpeed
Hub".

Long product description: i-tec USB 3.0 Charging HUB 10 Port with power adapter 48 W, 10x USB 3.0 charging
port, ideal for laptop ultrabook tablet PC, Windows Mac Linux

PRODUCT FEATURES

1x USB 3.0 port for connecting to the host device
10x USB 3.0 port
Charging power of the USB ports up to 10W
1x Power input (DC 12V/4A)
On / Off switches for individual USB ports

i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz

LED indicators
USB 3.0 cable from type A to type B (100cm)
Surge and overcurrent protection
OS: Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OS
Product Dimensions: 151 x 53 x 24mm
Product Weight: 165g
Package Dimensions: 173 x 116 x 60mm
Package Weight: 507g

SYSTEM REQUIREMENTS

Hardware Requirements:

Device with an available USB-A port

Operating Systém

Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OS

.

SPECIFICATION

Part Number Product Description & EAN

U3CHARGEHUB10 i-tec USB 3.0 Charging HUB 10 port + Power Adapter 48 W

EAN: 8595611702945

Hardware

Bus type USB-3.0

Ports/Connectors

USB 3.0 TYPE A 10

DC POWER ADAPTER JACK 1

System Requirements

Hardware Hardware Requirements: Device with an available USB-A port

Operating system Windows XP / Vista / 7 / 8 / 8.1 / 10

macOS X
Linux
Chrome OS R51 or later

Other features

Colour Space Grey

Housing Material Aluminium

Product Dimensions 151 x 53 x 24 mm

Product Weight 165 g

Package Weight 507 g

Packaging Dimensions (LxWxH) 173 x 116 x 60 mm

Support

Warranty period 2 years

Technical support lifetime

i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz