Itec POWER-BOX Instruction Manual
POWER-BOX
INSTRUCTION MANUAL
Designed and Manufactured by
ITEC Tontechnik und
Industrieelektronik GesmbH
8200 Laßnitzthal 300
Austria / Europe
2 www.itec-audio.com
POWER-BOX
ITEC POWER-BOX
Dear Customer!
ITEC- POWER-BOX – yet another product in our wide range of mobile, mains independent
loudspeaker systems.
Use the POWER-BOX as an independent audio system or as a completition and amplification of
existing loudspeaker systems.
Use the POWER-BOX as an independent audio system with cable or radio microphones with playbacks from your tape recorder or CD player.
Use the POWER-BOX as an additional and enriching sub-system together with the ITEC
LECTERN SUCCESS interfaced either via cable or wireless via radio-transmission.
However you are going to use the versatile POWER-BOX, you will certainly add the perfect sound
to many successful events with this compact, high performance tool so easy to handle.
sincerely,
Your ITEC acoustic team
www.itec-audio.com 3
POWER-BOX
ITEC POWER-BOX
TABLE OF CONTENTS
1. Saftey instructions 4
2. How to stand the POWER-BOX 4
3. How to start 5
4. Playback 5
5. Handling with cable microphone 6
6. Music attenuation (optional) 6
7. Using a radio microphone 7
8. Separate control with two radio receiver 7
9. Connecting the ITEC LECTERN SUCCESS 7
10. 12V DC – Output - jack 7
11. Recording 8
12. Connecting an external amplifier 8
13. Recharging the POWER-BOX 8
14. General advice 8
15. Changing batteries of radio microphones 9
16. Controls 10
17. The integrated CD-Player 11
4 www.itec-audio.com
POWER-BOX
1. Saftey instructions
Don’t try to open the device forcibly or with unfixing of the bolting. The device doesn’t contain any parts which
could be repaired by laymen. For help contact the manufactorer or the distributor.
Take care that no fluid (coffee, wine, ect.) is poured over the device. If this is happened, the device has to be
switched off immediately, be unpluged and checked by a practitioner.
Don’t expose the device to a temperature more than 50°C, a humidity more than 95% or heavy rainfall.
ATTENTION: Also when the device is unplugged on account of the integrated accumulator coused by a not
appropriate intervention short circuits are possible which can lead to demage or to a heat growth. By any
intervention of a practitioner the device has to be unplugged. After the carefully removal of the cover separate
the connection cable form the accumulator.
2. How to stand the POWER-BOX
Loosen the lower adjusting screw (a) of the aluminiumlight-weight tripod and open the legs of the tripod
(asamply as space allows). Once you have found a solid stand, tighten lower adjusting screw.
ITEC POWER-BOX
The height of the tripod can be changed by the upper adjusting screw
(b); bear in mind, however, that what you gain in height you lose in
stability!
Another option is an elevator tripod. The crank is used to adjust the
high of the tripod.
ATTENTION: make sure the POWER -BOX does not collapse, particularly when it is windy!
b
a
Loading...