i-tec PCI-Express Card 4x USB 3.0
i-tec PCI-Express card 4x USB 3.0 ports
2x external 2x internal with 1x 19pin
internal USB 3.0 adapter for
Windows/8/7/Vista/XP
PRODUCT DESCRIPTION
PCIe to USB 3.0 adapter is PCIe x 1 card with 2 external and 2 internal USB 3.0 ports (all of them are back
compatible with USB 2.0 and USB 1.1). It is fully compliant with PCI Express Base Specification Revision 2.0.
Adapter supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices with up to 5 Gbps
speed data rate. Built-in 4-pin power slot for receiving extra power supply from system. Internal USB 3.0 2x port
is ended with 19pin "header male" connector.
In case of any problems with installation, technical difficulties or faulty fuctionallity of device find
possible solution in FAQ bookmark first.
PRODUCT FEATURES
Card fully compliant with PCI Express Base Specification Revision 2.0
2 x external USB 3.0 type A, 2 x internal USB 3.0 via 1 x 19pin "header male" connector
Interface USB 3.0, backwards compatible with USB 2.0, 1.1
Data transfer rate up to 5 Gbps
Built-in 4-pin power connector for receiving extra power supply from the system
Hot-swapping feature allows you to connect/disconnect devices without powering down the system
OS Windows XP/Vista/7/8/8.1/10, Linux
Product size 120 x 66 x 20 mm
Product weight 47 g
Package size 188 x 148 x 33 mm
Package weight 126 g
System requirements
Hardware requirements One available PCI Express slot One available Molex connector on PSU
Operating system Windows XP/Vista/7/8/8.1/10, Linux
Package Content
PCIe to 2 x external + 2 x internal USB 3.0 adapter
Low profile plate for an installation into lower cases
Driver CD
User´s Guide
SPECIFICATION
i-tec Technologies s.r.o. 1/2 https://www.i-tec.cz
Part Number Product Description & EAN
PCE22U3 i-tec PCI-Express Card 4x USB 3.0
EAN: 8594047319741
Hardware
Ports/Connectors
System Requirements
Hardware Hardware requirements One available PCI Express slot One available
Molex connector on PSU
Operating system Windows 7/8/8.1/10 (32/64 bit)
Linux Ubuntu 14.04/16.04 Windows 10 - Automatic installation of OS
drivers. Other operating systems - manual driver installation. Firmware
updates automatically.
Other features
Colour
Housing Material
Product Dimensions 120 x 66 x 20 mm
Product Weight 47 g
Package Weight 126 g
Packaging Dimensions (LxWxH) 188 x 148 x 33 mm
Support
Warranty period 2 years
Technical support lifetime
Package contents
PCIe to 2 x external + 2 x internal USB 3.0 adapter
Low profile plate for an installation into lower cases
Driver CD
User´s Guide
For further information regarding setup or for answers to FAQ’s, please visit our website i-tec.cz. Specifications
are subject to change without notice.
Updated 19.7.2018
Powered by TCPDF (www.tcpdf.org)
i-tec Technologies s.r.o. 2/2 https://www.i-tec.cz
Loading...