ISP Technologies TOTALLY BLUES User Manual

CONNECTION CONFIGURATIONS
WARRANTY & SERVICE
This unit parts and workmanship are fully guaranteed to be free of defects under normal use and service for a period of three years from date of purchase. Any damage resulting from misuse of the failure to follow the precautions and instructions will void the warranty. In the event that the unit needs to be repaired, please return the unit to ISP Technologies directly. Simply re-pack the unit, send a copy of your original receipt, a note stating the problem and send it to:
ISP Technologies 5479 Perry Dr. Suite B Waterford, Mich.48329 ATTEN: Repair Dept.
All shipping charges must be prepaid. ISP will not be responsible for any damages incurred
in the shipping of any unit. Any claim will need to be
settled with the shipping company. The warranty will
be voided if the serial number has been tampered with.
Should you have any questions for the repair dept prior
to returning the product please call: 248-673-7790
FAX 248-673-7696
www.isptechnologies.com
GUITAR
Congratulations on your purchase of the Totally Blues pedal. The Totally Blues has some unique features that provide versatility over other overdrive devices. First, the Totally Blues has more gain for extra sensitivity. Second, the distortion circuit is configured for asymmetrical clipping for second harmonic enhancement. Third, the Mojo control adds depth and fullness of the guitar signal as it is feed into the distortion circuit. This will also change the distortion characteristics as the control is increased.
.
9V DC ADAPTER
LED- WHEN ON
EFFECT IS ENGAGED
OUTPUT INPUT
ACTIVE/BYPASS
SWITCH
THUMBSCREW
BATTERY ACCESS
GAIN – Sets the amount of distortion desired. OUTPUT – Adjusts the overall level. TONE – Adjusts the amount of treble after the distortion
circuit.
MOJO Adjusts the amount of low end frequency being fed into the distortion circuit.
BATTERY/ADAPTER
To install the battery, loosen the thumbscrew shown above and raise the switch cover to allow access to the battery compartment. Insert a 9v battery to the connector, place the battery into its compartment, and close by holding the switch cover down and tightening the thumbscrew.
To use the Totally Blues with an external power adapter, select an adapter with at least 100 milliamps capability at 9 volts DC. Make sure the adapter is polarized “TIP NEGATIVE.”
Loading...