INTRODUCTION
Congratulations on your purchase of the IMPRESSION™ Pedal. The IMPRESSION Pedal was
designed to provide ease of use for the most common DSP based effects while providing high
quality Stereo effects processing for Chorus, Flange, Delay and Reverb. The IMPRESSION allows
the use of 3 effects simultaneously including Chorus or Flange plus Delay and Reverb. The
IMPRESSION includes a TAP function allowing on the fly adjustment of the Chorus modulation
time, Flange modulation time and Delay time. The TAP button is assigned to the last function
switched on for Chorus, Flange or Delay and will use the time period between two consecutive
TAPs to determine the Modulation rate or Delay time setting. The IMPRESSION Pedal also
includes a digital implementation of ISP Technologies Decimator Noise Reduction to keep the
effects quiet.
IMPORTANT SAFTEY INSTRUCTIONS
Please read the following very carefully before operating this unit
Read ALL instructions carefully before using this unit. Keep these instructions for future reference.
Heed all warnings and follow all instructions.
Do not use this unit near water, in the rain, or where there is moisture. If this warning is ignored a
serious electrical shock or death may occur.
Do not attempt to service this unit. No user serviceable parts inside. Refer servicing to qualified,
ISP approved personnel. Servicing is required when the unit is damaged in any way, such as power
adaptor is damaged, liquid has been spilled into the unit, the unit has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Care should be taken to avoid spilling any liquid into this unit. Avoid exposure of this equipment to
dripping or splashing and ensure that no objects filled with liquid, such as vases, are placed on the
equipment.
Only use accessories or attachments that are specified by the manufacturer.
Failure to follow these instructions may void the warranty.
NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED ISP
TECHNOLOGIES SERVICE PERSONNELL.
The lightning bolt triangle is used to alert the user to the risk of electric shock.
The exclamation point triangle is used to alert the user to important operating or
maintenance instructions.
POWER REQUIREMENTS
This unit requires the connection of the external 9VAC Power Adaptor to a 120 volt AC outlet. Do
not attempt to connect this unit to any power source other than the 9VAC / 120VAC adaptor
supplied with the unit. The IMPRESSION Pedal will typically draw approximately 200 milliamps
of current from the external power adaptor.
Loading...