04/07
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
MPS
MULTI-PURPOSE STAND
A
PARTS DIAGRAM
B
Left Side 05850641 1 ea.
Right Side 05850641 1 ea.
C
D
Top 05850601 1 ea.
Back 05850652 1 ea.
E
G
Bottom 05850611 1 ea.
Shelf 05850611 1 ea.
L
M
Left Door 05850673 1 ea.
Right Door 05850673 1 ea.
J
Facia 05850686 1 ea.
Top Door Slide
Bottom Door Slide
H0045
H0055
1 set
H
I
H4
Caster Bracket 402303 4 ea.
ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H5
Socket Caster
402301 4 ea.
H2
Minifix Bolt 909834 18 ea.
H1
Wood Dowel 195000 19 ea.
H3
Minifix Cam 909810 18 ea.
H6
Casters
(2 locking)
402290 1 set
H7
Finger Pull
290110 2 ea.
H8
Glue 295020 1 ea.
HARDWARE
Glue three Wood Dowels (H1) into the top of the Facia Strip (J) as shown. Fill each
hole 1/4" full of glue and tap Wood Dowels into hole until bottomed out.
#1
#3
#2
H1
H1
H2
Note: Be sure to wipe any excess glue with a damp cloth.
Screw 4 Minifix Bolts (H2) into the pre-drilled holes of the
Worksurface (C) where indicated.
Insert 4 Wood dowels (H1) into Worksurface (C) where
indicated.
Glue the Facia Strip (J) to the underside of the Worksurface (C) as shown.
Fill each hole 1/4" full of glue and press Facia Strip until fully seated in
place. Set aside to dry.
Note: Be sure to wipe any excess glue with a damp cloth.
H1
H1
J
C
J
H1
H1
H2
J
C
H1
H2
#4
Screw 7 Minifix Bolts (H2) into
the pre-drilled holes of the Left
Side (A) and the Right Side (B)
where indicated.
#5
Insert 6 Wood Dowels (H1)
into the pre-drilled holes of
the Left Side (A) and the
Right Side (B) where
indicated.
Insert 2 Minifix Cams (H3)
facing out into Left Side (A)
and Right Side (B) as
shown.
#6
Place Caster Brackets (H4) over the holes in the bottom edge of each Side. Insert Caster
Sockets (H5) and tap until bottomed out against the Caster Brackets as shown.
Insert Casters (H6) into the Caster Sockets (H5) and tap into place as shown.
Note: the locking Casters should be installed to the front of the unit.
H2
H3
H1
H6
H5
H4
A
H2
H2
H2
H2
B
H2
H3 H3
H1
H2
A
H1
H2
H2
H2
H1
H2
B
H2
H1
H2
#7
H3
Insert 4 Minifix Cams (H3) into the Shelf (G).
Position Shelf onto the Left Side (A) as
shown.
Rotate Cams clockwise to lock in place.
#8
H3
#9
Insert 4 Minifix Cams (H3) into the Bottom Panel (E)
facing out. Position Bottom onto unit as shown.
Rotate Cams clockwise to lock in place.
H3
Insert 7 Minifix Cams (H3) into the Back (D) facing
out. Position Back over posts and dowels of the Left
Side (B) as shown.
Rotate Cams clockwise to lock in place.
H3
D
H3
A
H3
G
H3
D
A
H3
G
E
H3
A
#10
Position Right Side (B) bolts and dowels
over the corresponding Cams of the unit as
shown.
Rotate Cams clockwise to lock in place.
#11
Press a Finger Pull (H7) into the hole on the
finished side of each Door as shown.
Identify the Left and Right doors. The Left Door
(L) is wider that the Right Door (M).
#12
Turn the unit upright. Position Worksurface (C) bolts and
dowels onto the corresponding Cams of the unit as
shown.
Rotate Cams clockwise to lock in place.
B
H3
H3
Install Left door (L) into the rear door tracks as
shown. Insert the upper edge of the Door into the
top rear channel, pivot the door down and into
lower rear channel as shown.
#14
Install Right door (M) into the front
door track in the same manner.
#15
L
M
First, remove paper backing from
adhesive strip on the large door track (H).
Place the track on the underside of Shelf
(E) 1/4" from the front edge.
Next, remove paper backing from
adhesive strip on the small door track (I).
Place the track on the top of Bottom (D)
1/4" from the front edge.
#13
Due to excessive breaking during shipping,
we are no longer pre-installing the door track.
Your MPS Multi Purpose Stand is now completely
assembled and ready for use.
SHELF (E)
LARGE DOOR TRACK
SMALL DOOR TRACK
BOTTOM (D)
H
I
Insert 1/4" from
front edge
Insert 1/4" from
front edge
Loading...