03/07
LIBRARY FURNITURE
LFMD
FREESTANDING
MAGAZINE DISPLAY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
BY
Left Panel 07010642 1 ea.
A
Right Panel 07010642 1 ea.
B
Front Panel 07010680 1 ea.
C
Magazine
Back
07010680 4 ea.
D
Shelf Panel 07010636 5 ea.
E
Back Panel
07010657 1 ea.
F
Back
Spanner
07010660 1 ea.
G
PARTS DIAGRAM
Minifix Bolt 909834 43 ea.
H3
Minifix Cam 909810 43 ea.
H2
Wood Dowel 195000 26 ea.
H1
PARTS DIAGRAM
Using the Minifix System:
#1
Screw in Minifix Bolts (H3) and push in Wooden Dowels (H1)
to Right Panel (B) and Left Panel (A).
H3
H4
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
ASSEMBLED
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
DISASSEMBLED
A
(H1)
B
(H3)
#2
Screw in Minifix Bolts (H3) and push in Minifix Cam (H2) to
Front Panel (C) and Magazine Back Panel (D).
#3
Push in Minifix Cams (H2) into Shelf Panel (E).
H3
H4
#4
Push in Minifix Cams (H2) into Back Panel (F).
H2
(H3)
(H2)
C/D
E
(H2)
(H2)
F
#5
#6
#7
Push in Minifix Cams (H2) into Back Spanner (g).
Attach Shelf Panel (E) to Front
Panel (C) and Magazine Back
(D). Secure in place by turning
Minifix Cams (H2).
Note: Observe the direction
the Minifix Cams are facing.
Attach Front Panel (C)
and Shelf Panel (D) to Left
Panel (A). Secure in place
by turning Minifix Cams
(H2).
Note: Must start with
Front Panel and work
towards the back.
(H2)
G
(H2)
(H3)
E
(H2)
(H2)
(H3)
(H3)
E
C
(H2)
(H1)
(H1)
(H3)
A
#8
#9
Attach Magazine Back Panel
(D) and Shelf Panel (A).
Secure by turning Minifix Cam
(H2). Repeat with the
remaining 3 Magazine
Back/Shelf sub assemblies.
Attach Back Panel (F) to Left Panel (A).
Secure using Minifix Cams (H2).
#10
Attach Spanner (G) to
Left Panel (A). Secure
by turning Minifix
Cams (H2).
D
E
C
D
D
E
(H2)
E
(H1)
(H3)
(H1)
F
D
E
D
E
D
E
(H2)
E
(H2)
(H3)
C
(H1)
(H1)
(H3)
A
G
D
D
D
F
D
(H2)
(H2)
E
A
(H3)
(H3)
E
(H1)
E
E
#11
Attach Right Panel (B) to unit.
Secure using Minifix Cams (H2).
#12
Stand upright, assembly
is complete.
(H2)
C
E
A
(H2)
D
B
(H2)
G
(H2)
(H2)
D
D
EEE
(H2)
D
(H2)
(H2)
F
Loading...