0307
DTS
DELUXE
TYPING STAND
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
PARTS DIAGRAM
Right Side 05850341 1 ea.
Worksurface 05850101 1 ea.
Left Side Panel 05850141 1 ea.
Paper Rack Side 05850116 2 ea.
Paper Shelf
w/Pins
H1053 4 ea.
Back 05850152 1 ea.
Paper Rack
Bottom
05850119 1 ea.
Paper Rack Top 05850118 1 ea.
A
C
B
F
D
G
E
H3
Minifix Cam 909810 8 ea.
H2
Wood Dowel
195000
8 ea.
H1
Minifix Bolt 909834 8 ea.
H5
Caster Socket 402301 4 ea.
H4
Caster Bracket 402303 4 ea.
H6
Stem Caster
402290
4 ea.
Confirmat Screw
H7
950100
9 ea.
H8
Washer Head
Screw
920201
2 ea.
ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
HARDWARE
#1
Screw four Minifix Bolts (H1) into the pre-drilled holes of the
Worksurface (C) where indicated.
Insert four Wood Dowels (H2) into Worksurface (C) where indicated.
H1
H2
#2
Screw two Minifix Bolts
(H1) into pre-drilled holes
of each Side (A and B)
where indicated.
Insert two Wood Dowels
(H2) into pre-drilled holes
of each Side (A and B)
where indicated.
Insert two Minifix Cams
(H3) facing out into each
Side (A and B) as shown.
#3
Place Caster Brackets (H4) over the holes in the
bottom edge of each Side. Insert Caster Sockets
(H5) and tap until bottomed out against the Caster
Brackets as shown.
Insert Casters (H6) into the Caster Sockets (H5)
and tap into place as shown.
NOTE: The locking Casters should be installed
toward the front of the unit.
H1
H2
H2
A
H1
C
H3
H2
H2
H1
H1
B
H6
A/B
Bottom
H5
H4
Insert four Minifix Cams (H3) into the Back (D) as
shown. Position the Back onto the Left Side (A) as
shown.
NOTE: Note the hole orientation on Back (D).
Rotate Minifix Cams clockwise to lock in place.
#4
H3
#5
Position the Right Side (B) onto the Back (D) as
shown.
Rotate Minifix Cams clockwise to lock in place.
#7
Place a Paper Rack Side (E) with the unfinished
edge down as shown. Use four Confirmat Screws
(H7) to attach the Paper Rack Bottom (G) and
Paper Rack Top (F) as shown.
H7
Turn the unit upright. Position the Cams and Dowels of the
Worksurface (C) into the Minifix Cams of the unit as shown.
Rotate Minifix Cams (H3) clockwise to lock in place.
#6
A
D
B
HOLES
A
H3
D
H3
C
H7
H7
FINISHED
EDGE
E
F
G
Use four Confirmat Screws (H7) to attach
the other Paper Rack Side (E) as shown.
#8
H7
Select either a left or right-hand Paper Rack placement.
Attach Paper Rack unit to the underside of the
Worksurface (C) using two Washerhead Screws (H8) in
the pre-drilled holes as shown.
#9
#10
Use an Confirmat Screw (H7) through
the Back (D) to secure Paper Rack to
unit as shown.
H7
H8
E
H7
H7
H8
(or)
H7
#11
Turn each of the (4) plastic paper Trays
upside-down and remove the four plastic
pins located on the back edge of the tray.
Insert eight Shelf Pins into the pre-drilled holes
in both Paper Rack sides as shown.
Assembly of the Deluxe Typing Stand is now complete.
BOTTOM VIEW
OF TRAY
Loading...