Ironwood CDTW32GG User Manual
CIRCULATION DESK
CDTW32
CDTW39
TOWER STATION
0307
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
BY
PARTS DIAGRAM
A
B
Left Side - CDTW
Left Side - CDTW39
01050641
01050741
1 ea.
1 ea.
C
D
E
Back - CDTW
Back - CDTW39
01050652
01050752
1 ea.
1 ea.
F
K
P
Keyboard Shelf
01050641 1 ea.
Right Side - CDTW
Right Side - CDTW39
01050641
01050741
1 ea.
1 ea.
Top 01050601 1 ea.
Bottom 01050611 1 ea.
Printer Shelf
01050629 1 ea.
J
Divider 01050644 1 ea.
Toeboard 01050172 1 ea.
S1
Full Extension
Slide
490420 2 ea.
H4
Dowel
195000 14 ea.
H5
Minifix Bolt
909834 20 ea.
H3
Leveler
300870 4 ea.
H7
Angle Bracket
401170 2 ea.
H2
Leveler Insert
274650 4 ea.
H9
#8 x 5/8"
Panhead Screw
988056 12 ea.
H1
Minifix Cam
909810 20 ea.
H8
Confirmat Screw
950100 3 ea.
H6
Varianta Screw
988060 16 ea.
H11
Connector Screw
901350 4 ea.
H10
Grommet
286580 4 ea.
H12
Connector Sleeve
950200 4 ea.
HARDWARE
Wire Trough 412990 1 ea.
H13
H14
6 x .625 Panhead
Screw
901216 2 ea.
Using the Minifix System:
Insert six Minifix Cams (H1) into the
Back (D) with the arrows of the cams
facing out.
#1
#2
H1
Place the Left Side (A) and Right Side (B) on a clean,
carpeted surface with the pre-drilled holes facing up. Insert
the Leveler Inserts (H2) into the holes in the bottom edges of
each Side. Using a plastic mallet, tap until flush with the
surface. Screw the Levelers (H3) into the Leveler Inserts.
Adjust Levelers when the assembled unit is in place.
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
ASSEMBLED
DISASSEMBLED
Loading...