Ironwood CDTD32OC User Manual

CDTD

CDTD39

TWO DRAWER

UNIT

0807

IMPORTANT!

Assembly may require the assistance of

another person.

Before you begin assembly:

READ THE DIRECTIONS all the way through one

time. This will speed up the process and help you
understand the sequence of steps.

COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.

TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.

CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.

To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.

In the event any parts are missing from

this package, send your name, address,

telephone number, and a description of

the missing part(s) to: PARTS, Box 1420,

Missoula, MT 59806 or call:

1-800-769-5693 or FAX [phone].

BY

PARTS DIAGRAM

A B

C

E

D

Left Side - CDTD

Left Side - CDTD39

01010541

0101641

1 ea.
1 ea.

F

Right Side - CDTD

Right Side - CDTD39

01010541
01010641

1 ea.
1 ea.

Top 01010501 1 ea.

Back - CDTD

Back - CDTD39

01010152
01010252

1 ea.
1 ea.

Bottom 01010511 1 ea.

Toeboard 01010172 1 ea.

L

Drawer Front 01013063 2 ea.

J

Divider 01010544 1 ea.

G

Top Shelf 01010502 1 ea.

H4

Dowel

195000 18 ea.

H3

Minifix Bolt

909834 24 ea.

H2

Leveler

300870 4 ea.

H6

Minifix Cam

909810 24 ea.

D5

Drawer Bottom 1191665 2 ea.

D2

Drawer End 1069470 4 ea.

D1

Drawer Side 1069870 4 ea.

H1

Leveler Insert

274650 4 ea.

H11

Confirmat

Screw

950100 21 ea.

H9

Angle Bracket

401172 2 ea.

HARDWARE

H5

Varianta Screw

988060 8 ea.

H7

Lock Stop

401230 2 ea.

H12

Washerhead

Screw

920200 4 ea.

H8

#6 x 5/8"

Panhead Screw

901216 4 ea.

H10

#14 x 1/2"

Panhead Screw

901233 8 ea.

H16

Drawer Handle

400870 2 ea.

H17

1 1/2" Washerhead

Screw

920202 4 ea.

H18

#6 x 3/8"

Panhead Screw

01115 12 ea.

H23

Hex Wrench

999995 1 ea.

H22

Connector

Screw

901350 4 ea.

H21

Connector

Sleeve

950200 4 ea.

H14

#6 x 5/8"

Flathead Screw

901120 4 ea.

H15

Bezel

452350 2 ea.

H13

Cam Lock

452310
452360

2 ea.

LOCKSET 170-HP

H20

Grommet

286580 3 ea.

H19

Glue

295020 1 ea.

S1

Full Extension

Slide

490420 2 pr.

Using the Minifix System:

Place the Left Side (A) and Right Side (B) on a clean carpeted surface with the pre-drilled holes
facing up. Insert the Leveler Inserts (H1) into the holes in the bottom edges of each Side. Using a
plastic mallet, tap until flush with the surface. Screw the Levelers (H2) into the Leveler Inserts.

Adjust Levelers when the assembled unit is in place.

#1

Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.

When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.

Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.

To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.

ASSEMBLED

DISASSEMBLED