IRiver IHP-140 User Manual

Model iHP-140

http://www.iRiver.com

InstructionManual

PORTABLESTORAGEDEVICE

& MULTI-CODECJUKEBOX

Model iHP-140

Thank you for your purchase.

Please read this manual carefully

before using your new player.

http://www.iRiver.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note : This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR

TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Portable Storage Device (40GB)

The iHP can be used as a portable storage device to transfer files to any PC.

USB 2.0 is supported

The iHP supports USB 2.0 with maximum transfer speed of 480 Mbit/Sec.

Multi-Codec Player

Supports MP3, Ogg Vorbis, WMA, ASF, and WAV formats as a multi-Codec player. The iHP supports WAV types of 11/22/44/48KHz, 16bit, Mono/Stereo.

Firmware Upgrade

Provides the latest updated features via firmware upgrade.

Graphic LCD supporting Multiple Languages

The iHP comes with a graphic LCD which can support multiple languages, including: English, French, Spanish, German, Italian, other alphabet-oriented fonts, Korean, Japanese (Katakana, Hiragana, Kanji), Chinese (Traditional, Simplified) and others. A total of 38 languages are supported.

FM Tuner

Auto scanning and station memory functions make it easy for you to enjoy listening to the FM Radio.

Supports 6 Equalizer Patterns

Normal, Rock, Jazz, Classic, Ultra Bass, User EQ

This player supports 3D Surround Sound developed by SRS Lab. Easy Navigation

The simple navigation with tree configuration makes it easy to find or save any song.

iHP-140 can recognize up to 2000 folders and 9999 files. Graphic User Interface Menu Voice recording and recording (Line-In/Optical In) from an external

audio source is supported.

When voice recording, recording level is automatically controlled at voice recording mode.

Line-Out / Optical-Out

iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and/or other countries and is used under license. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated.

Microsoft Windows Media andtheWindows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries.

The information, artwork, text, video, audio, pictures, software and other intellectual property are protected by copyright and international laws. You may not reproduce, distribute, publicly perform, publicly display, modify or create derivative works of the intellectual property, unless authorized by the appropriate copyright owner(s). iRiver does not encourage any of our customers to use copy-righted Intellectual property illegally by using this product.

The iHP-140 can not be formatted using the Disc Management Utility or the Format Commander Utility in Windows 2000 and Windows XP since 32GB is the maximum HDD size enabling to be formatted. Because this is not supported at Windows O.S. and the player is not malfunction. You can still use a HDD which is formatted as FAT 32 system on Windows 98 SE or ME.

The iHP-140 can be formatted using Windows Explorer in Windows 98 SE and Me.

The iHP-140 can be formatted using the HDD Management Utility in Windows 2000 and XP.

(Stop)/ Power OFF

A-B (Interval Repeat) / MODE

Power ON/ /FM HDD(Play / Pause)

Rec Button

Mic

LCD Window

Charging Indicator

HDD Operating Indicator

FRONT VIEW

SIDE VIEW

HOLD

Jog Handle for Multi Function Control

4 5

5 6 7

8 9 10 11 12 13 14~15 16~19

19 20 21~23 24 25 26~29 30~32 33~35 36 37 38~46 47~48 49

50 51 52 53 54 55

1. Locating the Controls

Front View, Side View.......................................................

Up/ Down Side, LCD Window...........................................

Remote Control.................................................................

2. Getting started

Using AC Power Adapter..................................................

Software Installation..........................................................

Connecting the iHP to the Host PC...................................

Installing the iHP Device Driver........................................

Using as a Portable Storage Device.................................

Disconnecting the iHP to the Host PC..............................

Listening to Music.............................................................

Basic Operation................................................................

3. Useful Features

Navigation Mode / Menu / Mode.......................................

Playback Mode.................................................................

Navigation.........................................................................

Upgrading DB...................................................................

Adding DB.........................................................................

Using TEXT Files..............................................................

Operating the FM Tuner....................................................

Recording..........................................................................

Playback Mode.................................................................

EQ/SRS............................................................................

Menu.................................................................................

Using Winamp Playlist......................................................

Firmware Upgrade/Homepage..........................................

4. Additional Information

Reference.........................................................................

Precautions.......................................................................

Trouble Shooting...............................................................

Accessories.......................................................................

Product Specifications......................................................

Regulatory information......................................................

REMOTE

CONTROL/

EARPHONES

LINE OUTPUT

(Optical / Analog)

DC IN 5.0 V

USB Connection

Port

LINE INPUT

(Optical / Analog)

UP/ DOWN SIDE

LCD WINDOW

REMOTE CONTROL

RESET

EQ/SRS

TRACK

NUMBER

BIT RATE

PLAYBACK

INFORMATION

PLAYBACK

MODE

BATTERY INDICATOR

LEVEL METER

FOLDER NAME

SAMPLE RATE

FILE FORMAT

ARTIST NAME

HOLD

PLAY TIME

TITLE NAME

PROGRESSIVE BAR

LEVEL METER

(STOP) / Power OFF

Power ON /

HDD

(PLAY / PAUSE)

6 7

Main unit and Remote control both locked. Only Main unit is locked.

Only Remote control is locked.

LCD WINDOW (REMOTE CONTROL)

EQ/SRS

THE ORDER

OF SONGS

BIT RATE

PLAYBACK

INFORMATION

PLAYBACK MODE

BATTERY INDICATOR

FOLDER NAME

SAMPLE RATE

FILE FORMAT

HOLD

PLAY TIME

TITLE NAME

PROGRESSIVE BAR

TEXT FILE

LOAD

The player will charge automatically when the AC adapter is connected to the player. When fully charged, charge indicator light turns off.

Charging : Approx. 3 hours (At full discharge) Discharging (Playback time) : Approx. 16 hours (At full charge)

Playtime is measured under playback of MP3 128Kbps at full charge.

Use only the AC Power Adapter supplied with the player. The AC operating voltage of this player is 100~240V, 50~60Hz.

Connect the adapter to the 5.0V DC jack on the player and into an AC outlet.

USING AC POWER ADAPTER

RECHARGING METHOD

SOFTWARE INSTALLATION

If the player has been connected to the PC, disconnect it. Click

OK” to install the

installation program.

InserttheinstallationCDinthe PC. Locate and execute the file "iHP-100Manager 1.10.exe". The installation screen will appear.

Enteruserinformation,click "Next".

Select installation folder, click "Next".

Select installation type (Typical, Minimal, or Custom), click "Next".

Installation is progressing.

Windows ME, Windows 2000 and Windows XP will recognize the iHP as a USB drive automatically and you can use the player with out installing iHP Manager. For Windows 98 SE users, the iHP Manager must be installed for the computer to recognize the player. All users must install iHP Manager to use the Database function.

8 9

Click “Finish”. The installation is completed.

TO CONNECT THE IHP TO THE HOST PC

Type “A”

Type “B”

USBportonthePC

USBporton the player

USB cable

Type “A”

Type “B”

TO INSTALL THE IHP DEVICE DRIVER

Click to turn on the player.

Connect the USB cable to the player and the host PC.

Windows XP and Windows 2000 will display a "Device Attached" icon.

Once installed, open Windows Explorer and an additional drive shouldbelistedcalled“iHP-140”.

Place a checkmark next to "Specify a location" and click Browse.

Locate the following path on your computer. C:\Program Files\ iRiver\iHP 100\drivers, click “OK”.

Once the path has been located, Click “Next”.

Click “Next”

Click “Finish” The installation of the Device Driver is complete.

Chose "Search for the best driver for your device (Recommended)." Click Next.

Connect the player to your PC, Windows will display the "Add New Hardware Wizard. Click Next.

10 11

Complete the driver installation after installing the iHP Manager software.

To PC

To iHP

Note

Windows may ask to install a driver for the iHP. Please follow the provided driver installation guide on the following page.

Note: the iHP Manager software will not install an icon on the computer desktop and it does not have a user interface screen. iHP Manager adds the ability to create the DB file as described on page 24."

(Note: Windows 98SE

and Windows Me only.)

TO USE AS A PORTABLE STORAGE DEVICE

TO DISCONNECT THE PLAYER FROM THE HOST PC

If the player is not connected to the host PC, connect it to the host PC. (Refer to page 10)

The player will show up as a new drive in Windows Explorer.

The iHP operates just like an additional hard drive in Windows Explorer. Files can be copied, deleted, etc.

Note

When the iHP is attached to a computer for an extended period of time, be sure to plug in the AC adapter. Low batteries can prevent the proper functioning of the iHP.

Click and Drag files from the PC to the iHP player.

To delete files or folders from the iHP, select the files (folders) to be deleted and press "Delete" on the keyboard. Click “Yes” when asked to confirm the delete.

Click the 'Safely Remove Hardware" icon in the System Tray.

Click

OK after confirming the “Safe To Remove Hardware” massage.

Disconnect the USB cable between the iHP and host PC.

Click “Stop iRiver iHP-100-Driver(X)” or “Safely Remove TOSHIBA MK1

3GAL USB Disk Drive(X:)”. (Where X is the drive letter

assigned to the iHP)

12 13

Caution

Do not disconnect the player while the drive is in use. Complete any file copying or DB creation activity before attempting to disconnect the iHP from your PC.

To fast forward

To fast reverse

play previous track

To play

next folder

To play

previous folder

Power ON

To play / Pause

To stop

play next track

To turn off the player

File playback FM

receiving

Press the PLAY/STOP button to turn on the player. Press it again to play.

To select music

: To select previous track : To select next track

Put the HOLD switch to “OFF”.

To adjust the volume

To increase volume

To decrease volume

- When "Hold" is ON, the buttons on the player will not function.

- When the player is stopped, it will automatically shut off according to the "STOP POWER OFF" setting (Refer to page 43).

Connect the headphones and remote control as shown below.

NOTE

File Format displayed as below

MP3

WMA

OGG

WAV

ASF

+ 21 hidden pages