IRiver IHP-140 User Manual

Model iHP-140
http://www.iRiver.com
InstructionManual
PORTABLESTORAGEDEVICE
& MULTI-CODECJUKEBOX
Model iHP-140
Thank you for your purchase.
Please read this manual carefully
http://www.iRiver.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Note : This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
1
Portable Storage Device (40GB)
The iHP can be used as a portable storage device to transfer files to any PC.
USB 2.0 is supported
The iHP supports USB 2.0 with maximum transfer speed of 480 Mbit/Sec.
Multi-Codec Player
Supports MP3, Ogg Vorbis, WMA, ASF, and WAV formats as a multi-Codec player. The iHP supports WAV types of 11/22/44/48KHz, 16bit, Mono/Stereo.
Firmware Upgrade
Provides the latest updated features via firmware upgrade.
Graphic LCD supporting Multiple Languages
The iHP comes with a graphic LCD which can support multiple languages, including: English, French, Spanish, German, Italian, other alphabet-oriented fonts, Korean, Japanese (Katakana, Hiragana, Kanji), Chinese (Traditional, Simplified) and others. A total of 38 languages are supported.
FM Tuner
Auto scanning and station memory functions make it easy for you to enjoy listening to the FM Radio.
Supports 6 Equalizer Patterns
Normal, Rock, Jazz, Classic, Ultra Bass, User EQ
This player supports 3D Surround Sound developed by SRS Lab. Easy Navigation
The simple navigation with tree configuration makes it easy to find or save any song.
iHP-140 can recognize up to 2000 folders and 9999 files. Graphic User Interface Menu Voice recording and recording (Line-In/Optical In) from an external
audio source is supported.
When voice recording, recording level is automatically controlled at voice recording mode.
Line-Out / Optical-Out
2
iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and/or other countries and is used under license. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated.
1999~2004 iRiver Limited, All rights reserved.
Microsoft Windows Media andtheWindows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries.
The information, artwork, text, video, audio, pictures, software and other intellectual property are protected by copyright and international laws. You may not reproduce, distribute, publicly perform, publicly display, modify or create derivative works of the intellectual property, unless authorized by the appropriate copyright owner(s). iRiver does not encourage any of our customers to use copy-righted Intellectual property illegally by using this product.
The iHP-140 can not be formatted using the Disc Management Utility or the Format Commander Utility in Windows 2000 and Windows XP since 32GB is the maximum HDD size enabling to be formatted. Because this is not supported at Windows O.S. and the player is not malfunction. You can still use a HDD which is formatted as FAT 32 system on Windows 98 SE or ME.
The iHP-140 can be formatted using Windows Explorer in Windows 98 SE and Me.
The iHP-140 can be formatted using the HDD Management Utility in Windows 2000 and XP.
3
(Stop)/ Power OFF
A-B (Interval Repeat) / MODE
Power ON/ /FM HDD(Play / Pause)
Rec Button
Mic
LCD Window
Charging Indicator
HDD Operating Indicator
FRONT VIEW
SIDE VIEW
HOLD
Jog Handle for Multi Function Control
4 5
5 6 7
8 9 10 11 12 13 14~15 16~19
19 20 21~23 24 25 26~29 30~32 33~35 36 37 38~46 47~48 49
50 51 52 53 54 55
1. Locating the Controls
Front View, Side View.......................................................
Up/ Down Side, LCD Window...........................................
Remote Control.................................................................
2. Getting started
Using AC Power Adapter..................................................
Software Installation..........................................................
Connecting the iHP to the Host PC...................................
Installing the iHP Device Driver........................................
Using as a Portable Storage Device.................................
Disconnecting the iHP to the Host PC..............................
Listening to Music.............................................................
Basic Operation................................................................
3. Useful Features
Navigation Mode / Menu / Mode.......................................
Playback Mode.................................................................
Navigation.........................................................................
Upgrading DB...................................................................
Adding DB.........................................................................
Using TEXT Files..............................................................
Operating the FM Tuner....................................................
Recording..........................................................................
Playback Mode.................................................................
EQ/SRS............................................................................
Menu.................................................................................
Using Winamp Playlist......................................................
Firmware Upgrade/Homepage..........................................
4. Additional Information
Reference.........................................................................
Precautions.......................................................................
Trouble Shooting...............................................................
Accessories.......................................................................
Product Specifications......................................................
Regulatory information......................................................
REMOTE
CONTROL/
EARPHONES
LINE OUTPUT
(Optical / Analog)
DC IN 5.0 V
USB Connection
Port
LINE INPUT
(Optical / Analog)
UP/ DOWN SIDE
LCD WINDOW
REMOTE CONTROL
RESET
EQ/SRS
TRACK
NUMBER
BIT RATE
PLAYBACK
INFORMATION
PLAYBACK
MODE
BATTERY INDICATOR
LEVEL METER
FOLDER NAME
SAMPLE RATE
FILE FORMAT
ARTIST NAME
HOLD
PLAY TIME
TITLE NAME
PROGRESSIVE BAR
LEVEL METER
(STOP) / Power OFF
Power ON /
/
FM
HDD
(PLAY / PAUSE)
6 7
Main unit and Remote control both locked. Only Main unit is locked.
Only Remote control is locked.
LCD WINDOW (REMOTE CONTROL)
EQ/SRS
THE ORDER
OF SONGS
BIT RATE
PLAYBACK
INFORMATION
PLAYBACK MODE
BATTERY INDICATOR
FOLDER NAME
SAMPLE RATE
FILE FORMAT
HOLD
PLAY TIME
TITLE NAME
PROGRESSIVE BAR
TEXT FILE
LOAD
The player will charge automatically when the AC adapter is connected to the player. When fully charged, charge indicator light turns off.
Charging : Approx. 3 hours (At full discharge) Discharging (Playback time) : Approx. 16 hours (At full charge)
Playtime is measured under playback of MP3 128Kbps at full charge.
Use only the AC Power Adapter supplied with the player. The AC operating voltage of this player is 100~240V, 50~60Hz.
Connect the adapter to the 5.0V DC jack on the player and into an AC outlet.
USING AC POWER ADAPTER
RECHARGING METHOD
SOFTWARE INSTALLATION
If the player has been connected to the PC, disconnect it. Click
OK” to install the
installation program.
InserttheinstallationCDinthe PC. Locate and execute the file "iHP-100Manager 1.10.exe". The installation screen will appear.
Enteruserinformation,click "Next".
Select installation folder, click "Next".
Select installation type (Typical, Minimal, or Custom), click "Next".
Installation is progressing.
Windows ME, Windows 2000 and Windows XP will recognize the iHP as a USB drive automatically and you can use the player with out installing iHP Manager. For Windows 98 SE users, the iHP Manager must be installed for the computer to recognize the player. All users must install iHP Manager to use the Database function.
8 9
Click “Finish”. The installation is completed.
TO CONNECT THE IHP TO THE HOST PC
Type “A”
Type “B”
USBportonthePC
USBporton the player
USB cable
Type “A”
Type “B”
TO INSTALL THE IHP DEVICE DRIVER
Click to turn on the player.
Connect the USB cable to the player and the host PC.
Windows XP and Windows 2000 will display a "Device Attached" icon.
Once installed, open Windows Explorer and an additional drive shouldbelistedcalled“iHP-140”.
Place a checkmark next to "Specify a location" and click Browse.
Locate the following path on your computer. C:\Program Files\ iRiver\iHP 100\drivers, click “OK”.
Once the path has been located, Click “Next”.
Click “Next”
Click “Finish” The installation of the Device Driver is complete.
Chose "Search for the best driver for your device (Recommended)." Click Next.
Connect the player to your PC, Windows will display the "Add New Hardware Wizard. Click Next.
10 11
Complete the driver installation after installing the iHP Manager software.
To PC
To iHP
Note
Windows may ask to install a driver for the iHP. Please follow the provided driver installation guide on the following page.
Note: the iHP Manager software will not install an icon on the computer desktop and it does not have a user interface screen. iHP Manager adds the ability to create the DB file as described on page 24."
(Note: Windows 98SE
and Windows Me only.)
TO USE AS A PORTABLE STORAGE DEVICE
TO DISCONNECT THE PLAYER FROM THE HOST PC
If the player is not connected to the host PC, connect it to the host PC. (Refer to page 10)
The player will show up as a new drive in Windows Explorer.
The iHP operates just like an additional hard drive in Windows Explorer. Files can be copied, deleted, etc.
Note
When the iHP is attached to a computer for an extended period of time, be sure to plug in the AC adapter. Low batteries can prevent the proper functioning of the iHP.
Click and Drag files from the PC to the iHP player.
To delete files or folders from the iHP, select the files (folders) to be deleted and press "Delete" on the keyboard. Click “Yes” when asked to confirm the delete.
Click the 'Safely Remove Hardware" icon in the System Tray.
Click
OK after confirming the “Safe To Remove Hardware” massage.
Disconnect the USB cable between the iHP and host PC.
Click “Stop iRiver iHP-100-Driver(X)” or “Safely Remove TOSHIBA MK1
3GAL USB Disk Drive(X:)”. (Where X is the drive letter
assigned to the iHP)
12 13
Caution
Do not disconnect the player while the drive is in use. Complete any file copying or DB creation activity before attempting to disconnect the iHP from your PC.
To fast forward
To fast reverse
To
play previous track
To play
next folder
To play
previous folder
Power ON
To play / Pause
To stop
To
play next track
To turn off the player
File playback FM
receiving
Press the PLAY/STOP button to turn on the player. Press it again to play.
To select music
: To select previous track : To select next track
Put the HOLD switch to “OFF”.
To adjust the volume
:
To increase volume
:
To decrease volume
- When "Hold" is ON, the buttons on the player will not function.
- When the player is stopped, it will automatically shut off according to the "STOP POWER OFF" setting (Refer to page 43).
Connect the headphones and remote control as shown below.
NOTE
File Format displayed as below
MP3
WMA
OGG
WAV
14
15
ASF
BASIC OPERATION
NAVIGATION
To Record
To activate Navigation
1.
To increase volume.
2. To select the previous track or FM station.
3.
To increase volume.
4. To select the next track or FM station.
5.
To select NAVI/MENU function.
6. Internal Microphone
7. To change to record standby mode or start
recording.
8.
To start or pause playback to change FM
HDD.
9.
To stop playback or recording or turn off.
10. HOLD: Enable or disable HOLD function. Buttons do not work when HOLD is enabled.
To activate Menu
To adjust the volume
Press + on volume button to increase volume and press – on button to decrease volume.
(Refer to page 30)
Press NAVI/MENU button and find the desired track by pressing the VOL + or VOL – button,
or , NAVI/MENU button.
Selecting FM Mode
when listening FM
Stereo
Mono
[Record standby]
File playback FM
receiving
[To select source to record]
[To start recording]
[To stop recording /
Standby for recording]
[To select Bitrate Type] [To select File Type]
16 17
BASIC OPERATION FUNCTION
BASIC OPERATION FUNCTION
NAVIGATION
MENU
MODE
Main unit and Remote control both locked. Only Main unit is locked. Only Remote control is locked.
The remote control operates every function by using 5 buttons.
Menu Operation
PLAY / PAUSE
STOP
Turn on the player Playback and Pause
Stop the playback
To listen to the previous track, push the jog switch to the left.
Press the Navi/Menu jog lever with a short click and find the desired track by pressing
or . To play the track, press Navi/Menu with a short click.
To move to upper folder, click the STOP button or long click NAVI/MENU button. If there is no upper folder, pressing the Stop button will exit the NAVIGATION mode.
Changing Mode
Long press of NAVI/MENU will enter the MENU.
Scrolling between menus : Press and Select Function: press Navi/Menu button. Exit: Press the stop button.
While an audio file is playing, press and hold theA-B/MODEbuttontoactivateplayback modes (Repeat, Shuffle, etc.).
18 19
To listen to the next track, push the jog switch to the right.
Power Off
Navigation Operation
HDD FM Changing
Slide jog lever to the right to increase volume or to the left to decrease volume.
Volume Control
Tolistentothe previous folder
To listen to the next folder
To change EQ/SRS
Record Standby
Push the NAVI/MENU handle toward or to select a track or folder to play.
1. NAVIGATION USING FILE TREE
Press A-B button once to select the beginning <A> Point.
A-B interval will be repeated.
Play selected interval repeatedly while playing.
INTERVAL REPEAT
Press A-B button again to select the ending <B> Point.
In case the database file is damaged or deleted or DB SCAN OPTION is set to “OFF”, the Navigation function will use the normal "File Tree" method of searching. (Refer to page 24 for DB file information.)
Press the NAVI/MENU button to play the selected track or display the contents of a folder.
Onceyouselectafolder,choosethesongyouwishtolistentoand press the NAVI/MENU button.
Push the NAVI/MENU handle toward to go the upper folder or the previous menu.
Press the NAVI/MENU button to display the list of audio tracks. The current track will also be displayed.
Navigation mode is useful for quickly searching your files by using ID3 tag information and file name.
20 21
Press the NAVI/MENU button. The function selection graphic displays on the LCD.
To search by
artist
s name
To search by
album’s name
To search by
song title
To search by
genre menu
To search by
files & folders
Press NAVI/MENU to display the details of the selected searching method.
Press the NAVI/MENU handle toward or to select searching condition.
Press the NAVI/MENU button to display the detail of the selected search condition.
If the selected search condition does not have any details, playback of matching tracks will begin immediately.
Repeat 4 ~ 5 steps to search for other tracks. Push
to go back the previous step.
When you select “Select All”, all tracks matching the selected condition are played and " " (Indicating List Repeat Mode) is displayed.
To cancel List Repeat Mode, press Stop to stop playback and press Stop again to cancel the List Repeat Mode.
In order to use the navigation by Artist/Album/Genre/ and Title, the DB SCAN setting must be set to YES in the firmware menu, (refer to page 41).
2. NAVIGATION USING MUSIC INFORMATION
Push the NAVI/MENU handle toward or to select the searching function.
22 23
Caution:DB navigation does not work when
The directory or file name is over 52 characters
Open Windows Explorer and select the iHP drive.
Connect the player to the host PC. (Refer to “Connecting the iHP to the Host PC”, page 10)
Right click on the iHP.
Select “DB File update” to activate DB File update.
TO UPDATE DB
If you are adding songs to the iHP and not deleting any files, you can save time by adding the files to the DB instead of updating the entire DB file.
After activating the explorer on the PC, select iHP driver.
Connect the player to the host PC. (Refer to “Connecting the iHP to the Host PC”, page 10)
Select “Add Music(s) to DB” to activate this function.
ID3 Tag information of the selected files are added to DB. In case DB file is not, new DB file (iRivNavi.iDB) is created.
TO ADD DB
After disconnecting the player from the host PC, you can search the added music by using ID3 Tag. (Refer to “Disconnecting the player from the Host PC”, page 13.)
Click “OK”.
After disconnecting the player from the host PC, you can use the Navigation function to search for songs using ID3 Tag information. (Refer to “Disconnecting the player from the Host PC”, page 13.)
Click the right button of mouse after selecting MP3 files or Folders to add to DB.
The DB is a DataBase of the songs on your iHP player. It indexes all the Artist, Album, Genre, and Title information as found in the ID tags of your MP3 files. It is important to perform the steps below after loading the iHP player for the first time. This can also be used to re-create the DB file if it is damaged or accidentally deleted. Any time songs are deleted from the player, the DB must be updated to keep the Artist, Album, Genre, and Title lists accurate. When new songs are added the DB must be updated or the songs must be added to the DB using the instructions on the following page.
24 25
The DB update will take from three to five minutes depending on the number of songs loaded on the iHP.
26
27
Make a new folder under ROOT folder on the Windows Explorer.
Push the NAVI/MENU lever toward
, or , to select the TEXT file under the TEXT folder.
TO MAKE A TEXT FILE
Click the NAVI/MENU button.
TEXT file is displayed on the LCD.
Click the REC button to switch the display to the current song information. Click the REC button again to return to the text file.
Click the STOP button to exit the text file and return to the song display screen.
TO READ A TEXT FILE
Click the NAVI/MENU button to go to NAVI mode. Or select the fifth icon, “To search by files & folders” on the Navigation using Music Information
You can read text files on your iHP player by creating a "TEXT" folder and copying .TXT files into it.
- The screen can display 19 characters across and 8 lines.
- The text is not displayed on the remote.
- Text files can not be deleted directly from the player, it must be connected to the PC and files deleted from Windows Explorer.
- The player can store 200 text files, and can read up to 240 Kbytes per each text file.
Copy ***.txt files on the PC to the player.
Type TEXT as a name of a new folder on the Windows Explorer.
NOTE
28
29
TO SEARCH THE TEXT FILES
Push , levertomovetothenextlineduringreadingthetext.
The number displayed is the Kilobyte size and Kilobyte location in the text file.
1. To Search a Text files generally
2. To go to specific position (Useful for large files.)
Push , lever to move to the next page during reading the text.
Click the NAVI/MENU button to move the desired position of the text.
Push , lever to select the desired Digit.
Push , lever to select the desired numeral.
Click the NAVI/MENU button. The TEXT goes to the selected position.
NOTE
Push or and select the desired station to save the station to.
Select CH02
Save complete
again
will exit the memory function without saving.
Select a station by pushing the
or
switch to the left or the right.
Note: The Auto Memory Function may not function well in weak transmission areas.
Press and hold the A-B/MODE button.
Press the NAVI/MENU button to exit the Preset mode.
Automatically select station and save them in sequential order.
While playing an Audio File, Press and hold the PLAY/PAUSE button.
The FM function picture displays on the LCD.
Push the
or
button to select FM frequency.
Press the STEREO/PLAY/PAUSE button to select Stereo/Mono.
To change frequency, push the or switch to the left or the right.
Auto Scan function: To select a station to store, press the NAVI/MENU button to exit Preset mode and find a station by using
or
.
or
or
OPERATING THE FM TUNER
SELECTING FREQUENCY
AUTO MEMORY FUNCTION (Save stations automatically)
MEMORY FUNCTION (Save stations manually)
PRESET Mode : To select a station saved in memory, press the NAVI/MENU button to enter Preset mode. Select a stored station by using the
or switch.
30 31
Up to 20 stations can be stored.
Exit Preset
Up to 20 stations will be stored in channels 1~20 automatically.
Select the channel to be deleted at preset mode. Press and hold the memory button.
- The next channel will appear when channel deletion is completed. Push the MEMORY button if you want to delete the next channel also.
FM Tuner reception may vary in different areas. While in Preset mode, Auto Scan and Auto Memory functions are not
available.
When the player does not have any preset channels, EMPTY will be
blinking at preset mode.
MEMORY DELETE FUNCTION (Delete saved channels)
Connect the stereo cable to the LINE IN jack on the iHP and to the LINE OUT or Headphone jack of an external audio device.
CONNECTING THE PLAYER TO EXTERNAL AUDIO SOURCE
Press the REC button to activate recording standby mode.
Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to select the source to record
- To record voice with internal microphone : INT.MIC
- To record voice with the external microphone: EXT.MIC
- To record from an external audio device with an Optical Out: OPTICAL.
-TorecordfromanexternalaudiodevicewithastandardLineOutor Headphone jack: LINE-IN
If the external audio device has an Optical output, connect an Optical cable to the Optical Out jack on the external device and to the Optical In jack on the iHP. When recording by using the external microphone, connect the external microphone to the Line-In jack.
32 33
RECORDING
Push the MENU/NAVI handle toward or ,or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save.
Push the MENU/NAVI handle toward or ,or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality. This is only for MP3 file.
Push the REC button to start recording. When recording from an external audio device, be sure to start the playback on that device when recording on to the iHP.
Press the REC button to pause recording. And press the REC button again to restart recording.
Volume level can not be controlled on the iHP while recording from an external device.
While recording, press
(STOP/PWR OFF) to stop recording and switch to recording standby mode. Press the REC button again to begin recording to a new file.
34 35
At recording standby mode, press and hold button to go previous mode.
During recording, press REC button to pause recording, press REC button again to start recording.
TO STOP RECORDING
TO PLAY THE RECORDED FILE
Press button to play the recorded file at the recording standby mode.
TO PAUSE RECORDING
When saving as WAV file, the Bitrate generally is 1411Kbps.
(44.1 KHz, 16Bit, Stereo)
When saving the optical signal with 48KHz as WAV file,
the Bitrate is 1536Kbps. (48 KHz, 16Bit, Stereo)
NOTE
Recorded files are stored in folders matching the source name from where the audio was recorded.
- Line In/Optical In : ROOT\RECORD\AUDIO\AUDIOXXX.MP3(WAV)
- INT/EXT Mic : ROOT\RECORD\VOICE\VOICEXXX.MP3(WAV)
Recording is automatically stopped if:
- The iHP's memory is full.
- When the recorded MP3 file size is over 195MB
- When the recorded WAV file size is over 795MB
- The recorded time is longer than 5 hours.
- The battery is low.
- When sampling rate is changed during optical recording
Caution
Optical recording can sample at 44.1KHz or 48KHz. It is important to match the recording sampling rate with the playback sampling rate of your optical output device. Note, when the player is is Record Standby Mode, it will automatically shut off according to the "STOP POWER OFF" setting (Refer to page 43).
When the A-B/MODE button is pushed, the playback mode changes and an icon indicating the mode is displayed.
REPEAT
Play a single track repeatedly. Press or to play the previous or next track.
Play all tracks in the folder and stop. Play all tracks in the folder repeatedly. Play all tracks in the player repeatedly.
Randomly play all tracks in the player and stop. Play a single track repeatedly. Press
or to switch to a new
random track. Randomly play all tracks in the folder and stop. Press
or to
switch to a new random folder. Randomly play all tracks in the folder repeatedly. Randomly play all tracks in the player repeatedly.
INTRO: Play beginning 10 seconds of each track in sequential order. INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track in
sequential order. You can set this function in the MENU function.
SHUFFLE
INTRO
The iHP has various playback modes. Please refer to the function controls (see page 44 for details) for user-defined configurations.
36 37
You can change the EQ to match your music style.
- Normal / Rock / Jazz / Classic / Ultra Bass / User EQ
-
SRS / TruBass / WOW (Preset) / WOW (User)
Whenever the REC button is pressed, EQ changes as the following order :
(Normal
Rock Jazz Classic Ubass User EQ SRS
TruBass WOW(Preset) WOW(User))
You can set the EQ function by using Function Menu. Refer to page 44~45.
EQ/SRS
EQ
SRS
1) SRS Selection
-SRS(
) : SRS is activated.
- TruBass : TruBass is activated.
- WOW (Preset) : WOW (Preset) is operated as a preset setting organized by SRS +TruBass +Focus function.
- WOW (User) : WOW (User) is operated as a setting of SRS +TruBass +Focus adjusted in the SRS Settings on the menu by user.
2) SRS Settings (The defaults is 5, 7, High, 60Hz)
-SRS(
) : SRS range can be set from 1 to 10.
- TruBass : TruBass range can be set from 1 to 10.
- Focus : The fineness of the sound can be selected. (Low, High)
- Boost : You can set the Bass according to the using earphones or the Bass. (40, 60, 100, 150, 200, 250, 300, 400Hz)
SRS( ) is the trade mark of SRS Labs. Inc.
What is SRS(
)?.....
SRS-WOW is simulated 3D surround sound developed by SRS Lab and is composed by SRS, TruBass, Focus, and WOW.
- EQ (SRS Off) : SRS is deactivated and EQ set by user is operated. (Normal, Rock, Jazz, Classic, UBass, User EQ)
38 39
Function Control is subject to change with different firmware versions.
Users can configure their own settings.
MAIN MENU
SUB MENU
Press and hold the NAVI/MENU button to display the menu system. It is composed of 7 main menus with sub-menus.
Beep Volume Resume Fade In Language Tuner Region Load Default Firmware Upgrade DB Scan
When you select a sub menu, you can set your preference to be displayed.
Back Light (Battery) Back Light (Adapter) LCD Contrast(Main) LCD Contrast(Remote) Tag Information Time
Sleep Timer Stop Power Off
Scan Speed Scroll Type Optical Out Fast Skip
Repeat Shuffle Intro
Sound Balance EQ Bass Boost Treble Boost SRS (
)
SRS Settings
General
Control
Mode Sound
TimerDisplay
Record Type Bitrate AGC Voice Monitor EXT.MIC Volume
Record
CONFIGURATION
MENU OPERATION
Scroll between Menu
Use the , to select a sub menu, push the NAVI/MENU button to display the contents of that sub menu.
From Main Menu to Sub Menu
Press and hold the NAVI/MENU button to display the main menus. Push volume
,
to scroll between main menus, press the
NAVI/MENU button to select sub menu.
Change Settings by user
Use the , or ( , ) to change the settings. Push NAVI/MENU to save the setting.
Exit Sub Menu
Press to display the initial setting menu.
Press at the initial setting menu to exit Function Control Mode.
Window for SUB MENU SETTING
Exit Main Menu
40 41
BEEP VOLUME
Setbeepvolumelevelto0/1/2/3step.
RESUME
When ON, player resumes to previous place in song after STOP or Power OFF.
FADE IN
When activated, volume increases gradually at playback mode to prevent sudden loudness.
LANGUAGE (Supports 38 languages)
Song title and ID3 tag information is dependent on the version of the PC operating system that was used to create it. (For example, if a MP3 files is created in a Korean version of Windows, the language setting should be Korean for proper title display)
TUNER REGION
You can set the FM frequency and step according to your area.
Set them to fit your region to receive FM Radio. If tuner region is newly set, the old preset stations is
deleted.
GENERAL
LOAD DEFAULT VALUE
Initialize all settings to original factory setting.
FIRMWARE UPGRADE
You can upgrade the player’s Firmware. Refer to page 49 for details.
BACK LIGHT (Battery)
You can adjust the time that the Backlight stays on while the player is operated using the battery built in the player.
(Time range can be made from 1~60 sec.)
BACK LIGHT (Adapter)
YoucanadjustthetimethattheBacklight stays on while the player is operated using AC adapter.
(Timerangecanbemadefrom1~59sec.) If 60 sec is selected, backlight is always on.
DISPLAY
DB SCAN
TurntheNavigationtosearchbyusingID3Tagon or off.
Yes : The player will take several seconds when it
turns on to scan the DB file. This allows the Artist, Album, Genre, and Title searching.
Note : For Artist, Album, Genre, and Title searching to be activated, a DB
file must be created on the iHP. Refer to page 24 for instructions.
No : The iHP will power on more quickly but only File/Folder navigation
will be available.
42 43
LCD CONTRAST (Main)
Adjust LCD contrast of the player.
TAG INFORMATION
ON : Displays track with ID3 tag information and you
can change the configuration of Tag information.
OFF : Displays track with file name. The change will take affect when the next track is
played.
TIME
Normal : display elapsed time. Remain : display remaining time.
Note:IncaseofVBRMP3files,theremaining
time may display inaccurately.
LCD CONTRAST (Remote)
Adjust LCD contrast of remote control.
SCROLL TYPE
Adjust scroll speed by 1x / 2x / 4x / Vertical / Horizontal. Vertical : The scroll goes up and down Horizontal : The scroll goes from the left to the right.
SCAN SPEED
The fast scan speed can range from OFF / 1x / 2x / 4x.
STOP POWER OFF
Automatically turns power off at stop mode. (Timerangecanbemadefrom1~60minutes.)
SLEEP POWER OFF
Automatically power off after fixed time (Timerangecanbesetfrom1to99minutes).
When the power is off, the sleep power off setting
goes back to 0.
TIMER (Set Auto Power Off)
CONTROL
OPTICAL OUT
ON: The optical output will be enabled starting with the next track.
Caution : Do not look directly into the Optical
Out jack. The laser signal can be harmful to your eyes.
FAST SKIP
OFF : Disables the skip feature. 10: Plays the previous 10th or the next 10th song. Directory: Jump to the Previous/Next directory.
and button can be used for this setting.
FAST SKIP
Control
44 45
INTRO MODE
INTRO MODE plays the beginning 10 seconds of
each track. INTRO HIGHLIGHT plays 10 seconds from 1 minute into each track in sequential order.
REPEATMODE/SHUFFLEMODE
Youcanselectafileordirectorytolistento repeatedly.
You can play the selected mode simultaneously by setting REPEAT MODE / SHUFFLE MODE respectively. (Refer to page 36 for details about each mode)
MODE (PLAYBACK MODE)
SOUND BALANCE
Balance your sound to the right or left or keep it in the center according to your preference. When Sound Balance bar is moved to L (Left, 20),the sound outputs at the left earphone. When the bar is moved to R (Right, 20) the sound outputs at the right earphone. The default value is 0 the sound outputs the same level at both earphones.
EQ
You can select 6 EQ. EQ is selected as follows :
Normal Rock Jazz Classic Ultra Bass User EQ
BASS BOOST
Bass Boost level is from 0 to 24dB by 2 step.
The value set on the BASS BOOST is applied to
USER EQ.
TREBLE BOOST
Treble Boost level is from 0 to 6dB by 2 step. The value set on the TREBLE BOOST is applied to USER EQ.
SOUND
SRS
You can enjoy EQ or 4 mode surround sound. EQ (SRS OFF)
SRS TruBass WOW
(Preset)
WOW (User)
SRS Settings
You can enjoy various surround sound by setting the sound levels. SRS : 1~10 TruBass : 1~10 Focus : Low, High Boost : 40Hz/ 60Hz/ 100Hz/ 150Hz/
200Hz/ 250Hz/ 300Hz/ 400Hz
60Hz
NOTE
To adjust the USER EQ, set the BASS BOOST and TREBLE BOOST. When you set the BASS BOOST or TREBLE BOOST, the EQ is
automatically set to USER EQ.
46
RECORD TYPE
Adjust the format to record. You can select one of MP3 or WAV.
You can also set it by using
or button at
recording standby mode.
BIT RATE
You can adjust recording quality by setting BIT RATE. The higher BIT RATE is, the better the recorded sound is and the lower it is, the worse the recorded sound is.
Higher quality recordings will create larger files and take up more space on the player.
The Bit Rate can range from 40Kbps to 320kbps. You can also set it by using
or button at recording standby mode.
The BIT RATE OPTION is only applied when recording as a form of MP3.
AGC ON : When voice recording, the level is
automatically controlled to help avoid distortion in the recording. Also, recordings from long distances will be improved.
AGC function is operated at voice recording mode.
REC MODE
VOICE MONITOR
Allows you to listen to the sounds being recorded through the headphones in real-time.
EXT. MIC VOLUME
You can control sound level recorded by using the external microphone.
16
Make a PLAYLIST ( .M3U) using WINAMP. Note : WINAMP software is not included with the player.
Winamp execution picture
2. Click "LIST OPTS" located on the right bottom and click "SAVE LIST"
1. Launch WINAMP and add songs to
makealist.
Click the SAVE LIST button.
3. Name the file name (ex: iriver.m3u) and click "SAVE" to save the list.
HOW TO USE WINAMP PLAYLIST
Save to the player with the .M3U and the files added to the playlist.
Press A-B/MODE button at stop mode and LCD displays a list of M3U playlist files on the player. You can find the playlist you want to play by using the
button and the or button.
iRiver.m3u
My Music.m3u
47
49
How to UPGRADE?
1. Download the latest firmware upgrade file from www.iRiver.com.
2. Extract the file and save it to the ROOT folder of the iHP.
3. Connect the AC adapter to the iHP. (Caution: Only upgrade the firmware on the iHP with the AC adapter connected.)
4. Press in and hold the NAVI button to open the iHP menu.
5. Press the NAVI button once to select the General menu.
6. Select the Firmware Upgrade and press the NAVI/MENU button to activate the firmware upgrade.
7. Click the NAVI/MENU button after selecting
YES
on the Alert window.
8. Check whether your LCD window shows “Firmware Upgrading...”
9. Do not turn the player off or disconnect the player from the PC until the Firmware Upgrading is done. When thepower goes off automatically, the upgrade is done. After turning the player on, confirm the Firmware Upgraded operating.
Upgrade your firmware at www.iRiver.com.
What is FIRMWARE?
It is the operating system that works in the iHP.
iRiver provides you with the latest and best features through Firmware Upgrade. Visit www.iriver.com to upgrade your Firmware.
After selecting the song to play next,
A total of 200 playlists can be recognized.
RESERVATION FUNCTION
Press NAVI/MENU button during playback to select the next song to be played, then press A-B/MODE button to queue that song.
Press NAVI/MENU button during playback,
Press NAVI/MENU button or button to play the tracks in the order of the playlist.
PL icon indicates PLAY LIST.
48
iRiver.m3u
My Music.m3u
NOTE
URL : http://www.iRiver.com Provides information on our company, products, and email addresses for
support. Download the latest Software and Firmware Upgrades Register your iRiver product online so that our Customer Service is enabled
to provide support as efficiently as possible. Contents described in this manual may be changed with out notice.
HOMEPAGE
Note : Only one song may be queued at a time.
50 51
Road Safety
Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headset at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.
Preventing hearing damage
Avoid using headphones/earphones at high volume. Hearing experts advise against listening to continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.
Consideration for others
Keep the volume at a moderate level. This will allow you to hear outside sound and to be considerate of the people around you.
Avoiddroppingorimpactingtheplayer.
The player is designed to operate while walking or running, but dropping or excessively impacting the player may cause damage.
Avoid contacting the player with water.
Damage to the internal parts of the player may occur if the player comes into contact with water. If your player gets wet, dry the outside with a soft cloth as soon as possible.
Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed.
Keep the player away from a material with strong magnetic forces. This can cause malfunction in the Hard Drive.
If the iHP is disconnected suddenly during file transfer, it may case data loss and an error "Total of 0000 Folder(s)" may display on the iHP. If this happens, attach the iHP to your PC and run the Windows Scan Disk utility.
SAFETY
ON HEADPHONES AND EARPHONES
Some earphone plugs may not fit the remote properly. Use the
included earphone extension if your headphones will not plug in properly.
CAUTION!
Supported file types will have the extension MP3, OGG, WMA, ASF and WAV.
Folders and files are sorted in alphabetical order. iHP-140 can recognize up to 2000 folders and 9999 files. Track information is displayed either filename or ID3 TAG information. Physical shock can cause bad sectors on the Hard Disk inside the
iHP Series. This can be recovered using Windows Scandisk.
52 53
No Power
No sound is heard from the player or distortion is heard during playback.
Characters in LCD are corrupted.
Poor FM Reception.
Failed download of a file to the player
iHP will not charge properly
Check whether the battery is discharged. Check the operation after connecting AC Adapter.
Check whether VOLUME is set to “0”. Connect the remote control / earphone plug firmly. Check whether the plug is dirty (clean theplugwithadryandsoftcloth). Corrupted Audio file may have a noise or sound cut off.
Check out Menu
General Language and confirm whether the right language has been selected.(Refer to page 40)
Adjust the position of the player and earphones. Turn off the power of other electronic devices near the player. The headphone cord functions as the antenna, they must be plugged in for best reception.
Check the connection between your computer and the player to ensure that the cable is secure. Check the condition of the battery. Check the operation after connecting AC Adapter.
Check whether the adapter plug is
properly connected. Fully charged batteries will not accept charge, the player will appear not to enter charge mode.
Should any problem persist after you have checked these symptoms, consult your iRiver dealer or contact support at iRiver.com.
Remote Control
Headphones and foam covers
User Manual/Warranty card
AC Adapter
Installation CD
Line in / out Connection Cable
Earphone Extension Cable
USB Cable
Carrying Case
Accessories subject to change without notice and may vary from image shown.
External Microphone
54 55
20Hz~20KHz 20mW(L) +20mW(R) at 16 Max. Volume 90dB(L), 90dB(R) (MP3)
2dB
STEREO(L+R)
87.5MHz~108MHz 20mW(L) +20mW(R) at 16
Max. Volume 50dB Headphone/Earphone-Cord Antenna MPEG 1/2/2.5 Layer 3, Ogg Vorbis, WMA , ASF, WAV 32Kbps ~ 320Kbps (Ogg : 32Kbps~ 500Kbps, 44.1KHz) ID3VI,ID3V22.0,ID3V23.0 DC 5V , 2A Approx. 60(W) x 22(D) x 105(H) mm Approx. 172 g 0
~40
Approx. 16 hours
Frequency/Range Headphone output S/N ratio
Frequency Characteristics
No. of Channels FM Frequency range
Headphone Output S/N ratio
Antenna File TYPE
Bit Rate Tag
AC Adapter Dimension Weight Operational Temperature
MP3 / WMA / ASF
Specifications
Category
Item
Audio
Audio
(FM TUNER)
File Support
Power Supply
General
Max.
Playtime
The device manufactured and found to comply with limits for a Class B computing device according to the specifications in FCC rules Part 15. Operation is subject to the following two conditions;
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep the device's FCC registration valid.
This equipment, like other electronic equipment, generates and uses radio frequency energy. If not installed and used according to the instructions in this manual, this equipment may cause interference with your radio and television reception. If you think this equipment is causing interference with your radio or television reception, try turning the equipment off and on. If the interference problems stop when the equipment is switched off, then the equipment is probably causing the interference. You may be able to correct the problem by doing one or more of the following:
- Adjust the position of the radio or TV antenna
- Move away the device from the radio or TV
If necessary, consult your dealer or an experienced radio or television technician. You may find this booklet helpful:"How to Identify and Resolve Radio and TV Interference Problems"(Stock No. 004-000-00345-4), prepared by the FCC and available from the U.S Government Printing Office, Washington, DC 20402. See individual devices FCC ID and registration numbers.
The CE mark on the player is valid only for products marketed in the European Union.
Federal Communications Commission (FCC)
For the customers in Europe
Capacity
Model No
40GB
iHP-140
56 57
Loading...