IRiver IFP-1000 User Manual

iFP-1000 Series

http://www.iRiver.com

Hardware Instruction Manual

Thank you for your purchase.

Please read this manual carefully

before using your new player.

http://www.iRiver.com

Digital Audio Player/recorder/Camera/FM Tuner

Model iFP-1000 Series

Getting started

Locating the controls

PC software installation

Basic operation

Convenient Functions

Additional information

1

2

3

4

5

6

ContentsFFC Certification

This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Getting started

Contents

1

Getting started

Internet

Features

About power supply

1-1

1-2

1-3

This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.

Getting started

Features

1-2

Internet

Getting started

1-1

"

URL : www.iRiver.com

"

Find information on our company, products, and customer and technical support.

"

Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features.

"

Consult the product FAQ.

"

Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible.

"

All contents contained in this manual subject to change without notice to improve ability of this player or according to changing of specification.

iRiver Limited does not assume any responsibility for errors or omissions in this

document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and /or other countries and is used under license. Microsoft Windows Media and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated.

"

Multi-Codec Player

Supports MP3, WMA, OGG and ASF formats.

"

Firmware Upgrade

Provides the latest updated features via firmware upgrade.

"

260,000 color graphic LTPS LCD supporting Multiple Languages(40 languages)

iFP-1000 Series comes with 260,000 color graphic LTPS(Low Temperature Poly Silicon) LCD which can support multiple languages.

"

Digital Camera

Built in camera and Color LCD screen.

"

FM Function

You can easily listen to FM stations and set your favorite stations by using Auto Preset and Frequency Memory functions.

"

6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal

"

Xtreme EQ and Xtreme 3D

Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D.

"

GUI (Graphic User Interface) Menu System

"

Easy Navigation

The simple navigation makes it easy to find any song.

"

Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time.

"

Create your own playlists.

"

Record FM Radio, or Voice

Voice record level is automatically controlled by AGC function.

"

Convenient neck strap.

"

Built-in Rechargeable battery that charges directly from the USB port.

Getting started

About power supply

Battery detach/attach

1-4

About power supply

Getting started

Charging by using USB cable

1-3

Connect the USB cable to the player and the PC. The iFP battery will begin charging.

Connect the AC Power Adapter supplied with the player to the USB connector of the player. The AC operating voltage of this player is 100~240V, 50/60Hz.

Charging by using AC adapter

"

To detach : Press the tab to release the battery and slide it out of the player.

"

To attach : Slide the battery onto the player until it locks into place.

"

The charging time : Approx. 2.5~3 hours

(At full discharge)

Note

"

The player will charge even if it is turned off.

"

A charging indicator light will illuminate while the player is charging. The light will turn off when charging is complete.

Note

"

Charge and store the battery at room temperature. It may not charge properly in hot or cold temperature environments.

"

Do to attempt to disassemble the battery. Do not expose the battery to open flame. These activities could cause the battery to explode resulting in serious injury.

"

Do not contact the connectors of the battery to metal objects, or an electrical short may occur.

Note

If the battery is worn out, “Low Battery” is displayed on the LCD.

Locating the controls

Contents

2

Front View

Rear View

LCD screen

2-1

2-2

2-3

Getting started

1-5

This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.

Locating the controls

Rear view

2-2

Locating the controls

Front view

2-1

Earphone

USB connection port

I

(Previous / Fast Reverse)

I (Next / Fast forward)

Volume +, Enlarge, Up

LCD Screen

NAVI/MENU

Microphone

Camera

Charging indicator

Volume -, Reduce, Down

Rechargeble Battery

Hold

Neck strap

Mode/REC/Shot

Power on/off,

/ (Play/Stop),

Stereo

MEMORY/EQ

A-B (Interval repeat)

Picture flip

Camera lense

Battery Lock

PC software installaion

PC software installation

Contents

3

Note

Locating the controls

LCD Screen

2-3

File number

Bit rate

Playing time Playback node

Battery indicator

Volume

Folder name

Sampling rate

Program/file icon

File format

Artist/title name

Hold

Equalizer

Visualization

Clock

Status

Current bar

Folder icon

ASF : ASF IRM : IRM

MP3 : MP3 OGG : OGG

WMA : WMA

"

According to file type displayed as follows :

"

IRM (iRiver Rights Management) : iRiver Rights Management is a digital music format. Please visit our web site for details about this music format.

PC software installation

Attach the player

3-1

3-4

This section covers the installation for Windows operating systems only. For installation instructions for Mac OS, please see the Software Instruction Manual.

PC software installaion

PC software installation

Software installation

3-2

PC software installation

PC software installaion

Software installation

3-1

Click “Next” to Install iRiver Music Manager.

Insert the Installation CD into the CD-ROM drive. Installation start automatically.

Select the folder to Install. Click “Next”.

2

1

3

4

Click “Next” after selecting the language to install.

System Requirements (Windows)

"

Pentium 133MHz or faster

"

USB port

"

Window 98SE / ME / 2000 / XP

"

CD-ROM drive

"

10MB free hard disk space

Note

"

The player can store MP3 files or files of any type. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Music Manager Program.

"

Download latest versions of drivers and iRiver Music Manager at www.iRiver.com

"

Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD.

"

If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin.

"

The installation CD contains the following contents :

- Device Driver

- iRiver Music Manager

- Manager Program for Mac

"

Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP.

MPORTANT, please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC.

Please note that the installation screens may differ slightly from those appearing here, as software may be of a more recent version. If your screens differ, please visit www.iRiverAmerica.com/software for an updated user guide

PC software installaion

Attach the player

Connecting to the PC

3-4

PC software installation

PC software installaion

Software installation

3-3

Click “Install” to begin the installation.

5

6

7

Connect the USB cable (provided) to the USB port of your computer.

Type “A”

Type “B”

USB port on the PC

USB port on the iFP-1000 Series

USB cable

Type “A”

Type “B”

Turn on the player by pressing the button marked STEREO. Lift the protective cover over the USB port and connect the USB cable to the player.

“USB CONNECTED” will appear on the LCD screen of the player.

1

2

3

"

Connect the USB cable to the PC after playback stops to avoid errors.

Note

Click “Next” after confirming the installation folder.

Installation is in progressing. Click “Finish” after the installation is completed.

PC software installaion

Attach the player

Installation of New Hardware

3-6

Attach the player

PC software installaion

Installation of New Hardware

3-5

Select “Install the software automatically (Recommended)” and click “Next”.

If a "Hardware Installation" warning message appears, click "Continue Anyway".

(Windows XP) The iRiver software driver will not cause any damage to your computer.

1

3

4

After installing iRiver Music Manager from the CD and connecting the player to your PC, "Found New Hardware" screen is displayed.

2

The computer will automatically search to find your new hardware.

Information screen is displayed on the PC. New hardware is installed successfully and ready to use.

5

7

The installation will continue.

Click “Finish” Completed the installation of “New hardware”.

6

"

Windows 98SE, Windows ME, Windows 2000 O.S do not need any other device

driver installation.

"

Install New Hardware after installing iRiver Music Manager program.

Note

Basic operation

Contents

4

Attach the player

PC software installaion

Safely Removing the player from the PC

3-7

Basic Operation

Listening to Music

Listening to the FM radio

Recording from FM station

Digital Camera

Viewing to picture(My Album)

4-1

4-9

4-10

4-15

4-19

4-23

Click the “OK” after confirming the hardware to remove.

1

3

4

Select the “Safely Remove hardware” after clicking the “Safe To Remove Hardware” by using the right button of mouse.

2

Click the “Stop” after selecting the device to remove.

Click the “Close” after confirming the Safely Remove Hardware message. (In case of Windows XP)

Basic operation

4-2

Basic operation

Turning on the player

4-1

"

Put the HOLD switch to “OFF”.

"

Connect the earphones as shown below.

"

Press the PLAY/STOP button to turn on the player. The “My Image” appears on the LCD.

"

Press it again to play.

Click

Press the PLAY/STOP button to turn the player off.

Click

Long Click

OFF

Push

Turning off the player

To increase volume

To decrease volume

Push NAVI/MENU button to the VOL + direction to increase volume. Push NAVI/MENU button to the VOL – direction to decrease volume.

Adjusting the volume

Changing functions

Press and hold MODE button to appears current function on the LCD screen. Push the NAVI/MENU button toward

or

to select the desired function, then click the

NAVI/MENU button to enter that mode.

Click

Push

Long Click

"

When "Hold" is ON, the buttons on the player will not function.

"

When stopped or in recording standby mode, the player automatically turns off according

to the setting of “STOP POWER OFF” on the MENU.(Refer to page 5-19)

Basic operation

4-4

Basic operation

Listening to music

4-3

1

2

3

4

5 6

7

8

9

1. Displays the operating status of the player or pictures.

2. To skip to previous file, folder, picture, FM station or value.

3. To increase volume or zoom in a picture.

4. To skip forward to the next file, folder, picture, FM station or value.

5. To select NAVI/MENU function.

6. To decrease volume or zoom out a picture.

7. To turn on/off, to play or stop playback or to select FM mode

8. To select EQ mode, A-B repeat, or automatically store FM stations. EQ : NORMAL

ROCK JAZZ CLASSIC U BASS METAL Xtrm EQ Xtrm 3D

9. To select function, playback mode,record/stop recording or shot.

Long Click

Click

Navigation Menu

Press NAVI/MENU button and find the desired music file by pushing NAVI/MENU button to VOL + or VOL – direction. To play the files, press the NAVI/MENU button, push NAVI/MENU/VOL to the

I

direction or the PLAY/STOP button.

To move to the upper folder, NAVI/MENU/VOL to the

I

direction. If there is no upper folder,

NAVIGATION stops.

Navigation

Click

Push

Play

Up/Down

Upper folder

While an audio file is playing or the player is in stop mode, press MODE/REC to activate selected modes, such as Repeat or Shuffle.

Click

Repeat : Shuffle :

Intro :

Changing the playback mode

Click

Select the folder to delete in stop mode. Then Click the “MODE” button. “FILE(or FOLDER) DELETE ARE YOU SURE?” is displayed on the screen. Select “YES” by using

and (VOL + or VOL -) to delete. Then press NAVI/MENU button.

Delete

Click