Iriver H100 User Manual

Download

Model iHP-100 Series

http://www.iRiverAmerica.com

InstructionManual

PORTABLESTORAGEDEVICE

& MULTI-CODECJUKEBOX

Model iHP-100 Series

Thank you for your purchase.

Please read this manual carefully

before using your new player.

http://www.iRiverAmerica.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note : This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR

TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and/or other countries and is used under license. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated.

Microsoft Windows Media andtheWindows logo are trademarks or registered trademarks

of Microsoft Corporation in the United States and /or other countries.

The information, artwork, text, video, audio, pictures, software and other intellectual property are protected by copyright and international laws. You may not reproduce, distribute, publicly perform, publicly display, modify or create derivative works of the intellectual property, unless authorized by the appropriate copyright owner(s). iRiver does not encourage any of our customers to use copy-righted Intellectual property illegally by using this product.

URL : http://www.iRiverAmerica.com Provides information on our company, products, and email addresses for

support. Unique feature of "Firmware (system software) Upgrade" is available for

download on our site. The Firmware Upgrade provides new features as

well as enhancements to current features.

Register your iRiver product online so that our Customer Service is enabled to provide support as efficiently as possible.

Contents described in this manual may be changed to improve or any specification without notice.

Portable Storage Device

A large capacity of 10GB (iHP-100)/ 15GB (iHP-115) can be used as a storage device.

USB 2.0 is supported

iHP-100 Series supports USB 2.0 with maximum transfer speed of 480 Mbit/Sec.

Multi-Codec Player

Supports MP3, WMA, ASF, and WAV formats as a multi-Codec player. iHP-100 Series supports WAV type of 11/22/44KHz, 16bit, Mono/Stereo.

Firmware Upgrade

Provides the latest updated features via firmware upgrade. Player features such as add on, modification, and continuous improvement of the player are always provided.

Graphic LCD supporting Multiple Languages

iHP-100 Series comes with a graphic LCD which can support multiple languages, including: English, French, Spanish, German, Italian, other alphabet-oriented fonts, Korean, Japanese (Katakana, Hiragana, Kanji), Chinese (Traditional, Simplified) and others. A total of 38 languages are supported.

FM Tuner

Auto scanning and frequency memory function make it easy for you to enjoy listening to the FM Radio.

This player supports 6 Equalizer Patterns.

Normal, Rock, Jazz, Classic, Ultra Bass, User EQ

Easy Navigation

The simple navigation with tree configuration makes it easy to find or save any song.

The player can recognize up to 1000 folders and 5000 files. Graphic User Interface Menu Support Voice recording and recording (Line-In/Optical In) from an external

audio equipment is supported.

When voice recording, recording level is automatically controlled at voice recording mode.

Line-Out / Optical-Out function is supported

(Stop)/ Power OFF

A-B (Interval Repeat) / MODE

Power ON/ /FM HDD(Play / Pause)

Rec Button

Mic

LCD Window

Charging Indicator

HDD Operating Indicator

FRONT VIEW

SIDE VIEW

HOLD

Jog Handle for Multi Function Control

4 5

1. Locating the Controls

Front View, Side View.......................................................

Up/ Down Side, LCD Window...........................................

Remote Control.................................................................

2. Getting started

Using AC POWER ADAPTER..........................................

Software Installation..........................................................

Connecting the iHP-100 Series to the Host PC................

Installing the iHP-100 Series Device Driver......................

Using as a Portable Storage Device.................................

Disconnecting the iHP-100 Series to the Host PC............

Listening to Music.............................................................

Basic Operation................................................................

3. Useful Features

Navigation Mode / Menu / Mode.......................................

Playback Mode.................................................................

Navigation.........................................................................

Upgrading DB...................................................................

Adding DB.........................................................................

Operating the FM Tuner....................................................

Recording..........................................................................

Playback Mode.................................................................

EQ.....................................................................................

Menu.................................................................................

Firmware Upgrade............................................................

4. Additional Information

Reference.........................................................................

Precautions......................................................................

Trouble Shooting...............................................................

Accessories.......................................................................

Product Specifications......................................................

Regulatory information......................................................

5 6 7

8 9 10 11 12 13 14~15 16~19

19 20 21~23 24 25 26~28 29~31 32 33 34~42 43

44 45 46 47 48 49

REMOTE

CONTROL/

EARPHONES

LINE OUTPUT

(Optical / Analog)

DC IN 5.0 V

USB Connection

Port

LINE INPUT

(Optical / Analog)

UP/ DOWN SIDE

LCD Window

Remote Control

RESET

THE ORDER OF

SONGS

BIT RATE

PLAYBACK

INFORMATION

PLAYBACK MODE

BATTERY INDICATOR

LEVEL METER

FOLDER NAME

SAMPLE RATE

FILE FORMAT

ARTIST NAME

HOLD

PLAY TIME

TITLE NAME

PROGRESSIVE BAR

LEVEL METER

(STOP) / Power OFF

Power ON /

FM HDD

(PLAY / PAUSE)

6 7

Main unit and Remote control both locked. Only Main unit is locked.

Only Remote control is locked.

LCD Window (Remote Control)

THE ORDER

OF SONGS

BIT RATE

PLAYBACK

INFORMATION

PLAYBACK MODE

BATTERY INDICATOR

FOLDER NAME

SAMPLE RATE

FILE FORMAT

HOLD

PLAY TIME

TITLE NAME PROGRESSIVE BAR

Rechargeable function can automatically be activated while the AC adapter is connected to the player. When fully charged, charge indicator light turns off.

Charging : Approx. 3 hours (At full discharge) Discharging (Playback time) : Approx. 16 hours (At full charge)

The playback time is measured in case of 128 Kbps MP3 file playback.

Use only the AC Power Adapter supplied with the player. The AC operating voltage of this player is 100~240V, 50~60Hz.

Connect the adapter to the 5.0V DC jack on the player and into an AC outlet.

Using AC POWER ADAPTER

Recharging Method

To install “Program”

Click OK” to install the installation program.

Insert the Installation CD into the CD-ROM drive. Execute “iHP100Manager

iHP Manager.

exe” on the CD-ROM

The

installation screen is appeared.

Enteruserinformation,click "Next".

Select installation folder, click "Next".

Select installation type (Typical, Minimal, or Custom), click "Next".

Installation is progressing.

Windows ME, Windows 2000 and Windows XP have the program to support USB

2.0 Storage Device, and you can use this player without any program installation. Install the iRiver iHP Manager to use the Database Function. Windows 98 SE require the iRiver iHP Manager to be installed.

8 9

Click “Finish”. The installation is completed.

To connect the iHP-100 Series to the Host PC

Type “A”

Type “B”

USB port on the PC

USB port on the iHP-100 Series

USB cable

Type “A”

Type “B”

To install the iHP-100 Series Device Driver

Click to turn on the player.

Connect the USB cable to the player and the PC to recognize the correct information after Host PC is operated.

Windows XP and Windows 2000 will display a "Device Attached" icon. Windows may ask to install a driver for the iHP driver. Please follow the provided driver installation guide on the following page.

Once installed, open Windows Explorer and an additional drive should be listed called 'iHP 100'.

Place a checkmark next to "Specify a location" and click Browse.

Locate the following path on your computer. C:\Program Files\ iRiver\iHP 100\drivers, click “OK”.

Once the path has been located, Click “Next”.

Click “Next”

Click “Finish” Completed the installation of “Device Driver”.

Chose "Search for the best driver for your device (Recommended)." Click Next.

If the player is recognized on your PC, “Add New Hardware Wizard” is activated. Click “Next”.

10 11

This processing must be done after installing the iHP-100 Series Manager Program.

To PC

To iHP

Note

The new icon is not created additionally when connecting the player to the PC with another external equipment is connected to the PC according to the O.S.

To use as a portable storage device

To disconnect the player from the Host PC

If the player is not connected to the host PC, connect it to the host PC. (Refer to page 10)

Check the icon of the player on the PC window and confirm whether the player is added as a new drive in Windows Explorer.

The iHP-100 Series operates just like an additional hard drive in Windows Explorer. Files can be copied, deleted, etc.

Note

When the iHP-100 Series is attached to a computer for an extended period of time, be sure to plug in the AC adapter. Low batteries can prevent the proper functioning of the iHP-100 Series.

Click and Drag files from the PC to the iHP player.

To delete files or folders from the iHP-100 Series, select the files (folders) to be deleted and press "Delete" on the keyboard. Click “Yes” when asked to confirm the delete.

Click the 'Safely Remove Hardware" icon in the System Tray.

Click

OK after confirming the “Safe To Remove Hardware” massage.

Disconnect the USB cable between the iHP-100 Series and host PC.

Click “Stop iRiver iHP-100-Driver(X)” or “Safely Remove TOSHIBA MK1

3GAL USB Disk Drive(X:)”. (Where X is the drive letter

assigned to the iHP-100 Series)

12 13

Caution

While accessing the iHP-100 Series drive on the explore or media player, the player may not be removed from the PC safely. Remove safely the player after closing the running application programs. And the player may not be removed from the PC safely according to the internal comunication of the O.S (Windows XP, etc.). In this case, retry it after a few minutes. The tray icon on the O.S as like Windows XP, etc. may be hidden. Click the hidden icon indication on buton to display the icon in the tray.

Press the PLAY/STOP button to turn on the player. Press it again to play.

To select music

: To select previous track : To select next track

Put the HOLD switch to “OFF”.

To adjust the volume

To increase volume

To decrease volume

- When "Hold" is ON, the buttons on the player will not function.

- In case of stop status of the player or standby status of Voice recording, the player automatically turns off according to the setting of “STOP POWER OFF” on the MENU.(Refer to page 39)

Connect the headphones and remote control as shown below.

NOTE

Power ON

To play / Pause

To stop

play next track

To turn off the player

File playback FM

receiving

To fast forward

To fast reverse

play previous track

File Format displayed as below

MP3

WMA

ASF

WAV

Basic Operation

NAVIGATION

To Record

To activate Navigation

To increase volume.

2. To select the previous track or FM station.

To increase volume.

4. To select the next track or FM station.

To select NAVI/MENU function.

6. Internal Microphone

7. To change record standby mode or start

recording.

To start or pause playback to change FM

HDD.

To stop playback or recording or turn off.

10. HOLD: Enable or disable HOLD function. Buttons do not work when HOLD is enabled.

To activate Menu

To adjust the volume

Press + on volume button to increase volume and press – on button to decrease volume.

(Refer to page 26)

Press NAVI/MENU button and find the desired track by pressing the VOL + or VOL – button,

or , NAVI/MENU button.

There are two methods using ID3 Tag and PATH/NAME of File on NAVIGATION. Refer to page 21~23 for details.

Selecting FM Mode

when listening FM

Stereo

Mono

[Record standby]

File playback FM

receiving

[To select source to record]

[To start recording]

[Tostoprecording/

Standby for recording]

[To select Bitrate Type] [To select File Type]

16 17

Basic Operation Function

NAVIGATION

MODE

Main unit and Remote control both locked. Only Main unit is locked. Only Remote control is locked.

The remote control operates every function by using 5 buttons.

Menu Operation

PLAY / PAUSE

STOP

Playback and Pause

Stop

To listen to the previous track, please push the jog switch to the left.

Press the Navi/Menu jog lever with a short click and find the desired track by pressing

or . To play the track, press Navi/Menu with a short click.

To move to upper folder, press the STOP button. If there is no upper folder, pressing the Stop button will exit the NAVIGATION mode.

Changing Mode

Long press of NAVI/MENU will enter the MENU.

Scrolling between menus : Press and Select Function: press Navi/Menu button. Exit: Press the stop button.

While an audio file is playing, press and hold theA-B/MODEbuttontoactivateplayback modes (Repeat, Shuffle, etc.).

18 19

To listen to the next track, please push the jog switch to the right.

Power Off

Navigation Operation

HDD FM Changing

Slide jog lever to the right to increase volume or to the left to decrease volume.

Volume Control

Push the NAVI/MENU handle toward or to select a track or folder to play.

1. Navigation using File Tree

Press A-B button once to select the beginning <A> Point.

A-B interval will be repeated.

Play selected interval repeatedly while playing.

Interval Repeat

Press A-B button again to select the ending <B> Point.

In case the database file is damaged or deleted or DB SCAN OPTION is set to “OFF”, the Navigation function will use the normal "File Tree" method of searching.

Press the NAVI/MENU button to play the selected track or display the contents of a folder.

Once you select a folder, choose the song you wish to listen to and press the NAVI/MENU button.

Push the NAVI/MENU handle toward to go the upper folder or the previous menu.

Press the NAVI/MENU button to display the list of audio tracks. The current track will also be displayed.

Navigation mode is useful for quickly searching your files by using ID3 tag information and file name.

20 21

Press the NAVI/MENU button. The function selection graphic displays on the LCD.

To search by

artist

s name

To search by

album’s name

To search by

title name

To search by

genre menu

To search by

files & folders

Press NAVI/MENU to display the details of the selected searching method.

Press the NAVI/MENU handle toward or to select searching condition.

Press the NAVI/MENU button to display the detail of the selected search condition.

If the selected search condition does not have any details, playback of matching tracks will begin immediately.

Repeat 4 ~ 5 steps to search for other tracks. Push to go back the previous step.

When you select “Select All”, all tracks matching the selected condition are played and " " (Indicating List Repeat Mode) is displayed.

To cancel List Repeat Mode, press STOP button at the stop mode.

If DB SCAN OPTION is set to “OFF”, the Navigation function using the music information can not be operated because the player does not analyze the DB file when power on. To activate the navigation, set DB SCAN OPTION to ‘ON”. The player’s power off and then power on.

2. Navigation using Music Information

Push the NAVI/MENU handle toward or to select the searching function.

22 23

Caution:DB navigation does not work when

The directory or file name is over 52 characters.

Open Windows Explorer and select the iHP-100 Series drive.

Connect the player to the host PC. (Refer to “Connecting the iHP-100 Series to the Host PC”, page 10)

Right click on the iHP-100 Series.

Select “DB File update” to activate DB File update.

To update DB

You can add DB file for MP3 files based on ID3 Tag information by using the host PC.

After activating the explorer on the PC, select iHP-100 Series driver.

Connect the player to the host PC. (Refer to “Connecting the iHP-100 Series to the Host PC”, page 10)

Select “Add Music(s) to DB” to activate this function.

ID3 Tag information of the selected files are added to DB. In case DB file is not, new DB file (iRivNavi.iDB) is created.

To add DB

After disconnecting the player from the host PC, you can search the added music by using ID3 Tag. (Refer to “Disconnecting the player from the Host PC”, page 13.)

Click “OK”.

After disconnecting the player from the host PC, you can use the Navigation function to search for songs using ID3 Tag information. (Refer to “Disconnecting the player from the Host PC”, page 13.)

Click the right button of mouse after selecting MP3 files or Folders to add to DB.

This allows you to reconstitute DB for MP3 files based on ID3 Tag information. Artist, Album, Genre, etc.

If the iRivNavi.iDB file is damaged or deleted, files can no longer be searched by ID3 Tag information. The file can be restored from the PC.

24 25

Push or and select the desired station to save the station to.

Select CH02

Save complete

again

will exit the memory function without saving.

Select a station by pushing the

switch to the left or the right.

Note: The Auto Memory Function may not function well in weak transmission areas.

Press and hold the A-B/MODE button.

Press the NAVI/MENU button to exit the Preset mode.

Automatically select station and save them in sequential order.

While playing an Audio File, Press and hold the PLAY/PAUSE button.

The FM function picture displays on the LCD.

Push the

button to select FM frequency.

Press the STEREO/PLAY/PAUSE button to select Stereo/Mono.

To change frequency, push the or switch to the left or the right.

Auto Scan function: To select a station to store, press the NAVI/MENU button to exit Preset mode and find a station by using

OPERATING THE FM TUNER

Selecting Frequency

Auto Memory Function (Save stations automatically)

Memory Function (Save stations manually)

PRESET Mode : To select a station saved in memory, press the NAVI/MENU button to enter Preset mode. Select a stored station by using the

or switch.

26 27

Up to 20 stations can be stored.

Exit Preset

Up to 20 stations will be stored in channels 1~20 automatically.

Select the channel to be deleted at preset mode. Press and hold the memory button.

- The next channel will appear when channel deletion is completed. Push the MEMORY button if you want to delete the next channel also.

FM Tuner reception may vary in different areas. While in Preset mode, Auto Scan and Auto Memory functions are not

available.

When the player does not have any preset channels, EMPTY will be

blinking at preset mode.

Memory delete function (Delete saved channels)

Connect the stereo cable to the LINE IN jack on the iHP-100 Series and to the LINE OUT or Headphone jack of an external audio device.

Connecting the player to external audio equipment

Press the REC button to activate recording standby mode.

Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to selectthesourcetorecord

-Torecordvoice:MICROPHONE

- To record from an external audio device with an Optical Out: OPTICAL.

-TorecordfromanexternalaudiodevicewithastandardLineOutor Headphone jack: LINE-IN

If the external audio device has an Optical output, connect an Optical cable to the Optical Out jack on the external device and to the Optical In jack on the iHP100 Series.

28 29

Recording

Push the MENU/NAVI handle toward or ,or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save.

Push the MENU/NAVI handle toward or ,or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality. This is only for MP3 file.

Push the REC button to start recording. When recording from an external audio device, be sure to start the playback on that device when recording on to the iHP-100 Series.

Volume level can not be controlled on the iHP-100 Series while recording from an external device.

While recording, press

(STOP/PWR OFF) to stop recording and switch to recording standby mode. Press the REC button again to begin recording to a new file.

30 31

At recording standby mode, press and hold button to go previous mode.

Recorded files are stored in folders matching the source name from where the audio was recorded.

- Line In : ROOT\RECORD\AUDIO\AUDIOXXX.MP3(WAV)

- Mic In : ROOT\RECORD\VOICE\VOICEXXX.MP3(WAV)

Recording is automatically stopped if:

- The iHP-100 Series's memory is full.

-WhentherecordedMP3filesizeisover195MB

-WhentherecordedWAVfilesizeisover795MB

- The recorded time is longer than 5 hours.

- The battery is low.

Press REC button to pause recording, press RECbuttonagaintostartrecording.

To stop recording

To play the recorded file

Press button to play the recorded file at the recording standby mode.

To pause recording

When saving as WAV file, the Bitrate is 1411Kbps.

(44.1 KHz, 16Bit, Stereo)

NOTE

When the A-B/MODE button is pushed, the playback mode changes and an icon indicating the mode is displayed.

REPEAT

Play a single track repeatedly. Press or to play the previous or next track.

Play all tracks in the folder and stop. Play all tracks in the folder repeatedly. Play all tracks in the player repeatedly.

Randomly play all tracks in the player and stop. Play a single track repeatedly. Press

or to switch to a new

random track. Randomly play all tracks in the folder and stop. Press

or to

switch to a new random folder. Randomly play all tracks in the folder repeatedly. Randomly play all tracks in the player repeatedly.

INTRO: Play beginning 10 seconds of each track in sequential order. INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track in

sequential order. You can set this function in the MENU function.

SHUFFLE

INTRO

The iHP-100 Series has various playback modes. Please refer to the function controls (see page 40 for details) for user-defined configurations.

32 33

You can change the EQ to match your music style.

- Normal / Rock / Jazz / Classic / Ultra Bass / User EQ

You can set the EQ function by using Function Menu. Refer to page 41.

34 35

Function Control is subject to change with different firmware versions.

Users can configure their own settings.

MAIN MENU

SUB MENU

Press and hold the NAVI/MENU button to display the menu system. It is composed of 7 main menus with sub-menus.

Beep Volume Resume Fade In Language Tuner Region Load Default Firmware Upgrade DB Scan

When you select a sub menu, you can set your preference to be displayed.

Back Light (Battery) Back Light (Adapter) LCD Contrast(Main) LCD Contrast(Remote) Tag Information Time

Sleep Timer Stop Power Off

Scan Speed Scroll Type Optical Out

Repeat Shuffle Intro

Sound Balance EQ Bass Boost Treble Boost

General

Control

Mode Sound

TimerDisplay

Record Type Bitrate AGC

Record

Configuration

Menu Operation

Scroll between Menu

Use the

, to select a sub menu, push the NAVI/MENU button to display the contents of that sub menu.

From Main Menu to Sub Menu

Press and hold the NAVI/MENU button to display the main menus. Push volume

to scroll between main menus, press the

NAVI/MENU button to select sub menu.

Change Settings by user

Use the

, or ( , ) to change the settings. Push NAVI/MENU to save the setting.

Exit Sub Menu

Press

to display the initial setting

menu.

Press at the initial setting menu to exit Function Control Mode.

Window for SUB MENU SETTING

Exit Main Menu

36 37

BEEP VOLUME

Setbeepvolumelevelto0/1/2/3step.

RESUME

When ON, player resumes to previous place in song after STOP or Power OFF.

FADE IN

When activated, volume increases gradually at playback mode to prevent sudden loudness.

LANGUAGE (Supports 38 languages)

Song title and ID3 tag information is dependent on the version of the PC operating system that was used to create it. (For example, if a MP3 files is created in a Korean version of Windows, the language setting should be Korean for proper title display)

TUNER REGION

You can set the FM frequency and step according to your area.

Set them to fit your region to receive FM Radio. If tuner region is newly set, the old preset stations is

deleted.

GENERAL

LOAD DEFAULT VALUE

Initialize all settings to original factory setting.

FIRMWARE UPGRADE

You can upgrade the player’s Firmware. Refer to page 43 for details.

BACK LIGHT (Battery)

You can adjust the time that the Backlight stays on while the player is operated using the battery built in the player.

Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec.

BACK LIGHT (Adapter)

YoucanadjustthetimethattheBacklight stays on while the player is operated using AC adapter.

Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec / Always. If Always is selected, backlight is always on.

DISPLAY

DB SCAN

TurntheNavigationtosearchbyusingID3Tagon or off.

When you select "YES" on the DB SCAN, it takes several seconds until power is on according to the quantity of files stored on the player.

38 39

LCD CONTRAST (Main)

Adjust LCD contrast of the player.

TAG INFORMATION

ON : Displays track with ID3 tag information and you

can change the configuration of Tag information.

OFF : Displays track with file name. The change will take affect when the next track is

played.

TIME

Normal : display elapsed time. Remain : display remaining time.

Note:IncaseofVBRMP3file,theremaining

time may display inaccurately.

LCD CONTRAST (Remote)

Adjust LCD contrast of remote control.

SCROLL TYPE

Adjust scroll speed by 1x / 2x / 4x / Vertical / Horizontal. Vertical : The scroll goes up and down Horizontal : The scroll goes from the left to

the right.

SCAN SPEED

The fast scan speed can range from OFF / 1x / 2x / 4x.

STOP POWER OFF

Automatically turns power off at stop mode. (Timerangecanbemadefrom1~60minutes.)

SLEEP POWER OFF

Automatically power off after fixed time (Timerangecanbesetfrom1to99minutes).

When the power is off, the sleep power off setting goes

back to 0.

TIMER (Set Auto Power Off)

CONTROL

OPTICAL OUT

ON: The optical output will be enabled starting with the next track.

Caution : Do not look directly into the Optical

Out jack. The laser signal can be harmful to

your eyes.

40 41

INTRO MODE INTRO MODE plays the beginning 10 seconds of

each track. INTRO HIGHLIGHT plays 10 seconds from 1 minute into each track in sequential order.

REPEATMODE/SHUFFLEMODE

Youcanselectafileordirectorytolistento repeatedly.

You can play the selected mode simultaneously by setting REPEAT MODE / SHUFFLE MODE respectively. (Refer to page 32 for details about each mode)

MODE (PLAYBACK MODE)

SOUND BALANCE

Balance your sound to the right or left or keep it in the

center according to your preference. When Sound

Balance bar is moved to L (Left, 20),the sound outputs

at the left earphone. When the bar is moved to

R (Right, 20) the sound outputs at the right earphone.

The default value is 0 the sound outputs the same level at both earphones.

You can select 6 EQ.

EQ is selected as follows :

Normal Rock Jazz Classic Ultra Bass User EQ

BASS BOOST

Bass Boost level is from 0 to 24dB by 2 step.

The value set on the BASS BOOST is applied to

USER EQ.

TREBLE BOOST

Treble Boost level is from 0 to 6dB by 2 step. The value set on the TREBLE BOOST is applied to USER EQ.

SOUND

USER EQ is set to the value selected on the BASS BOOST and TREBLE

BOOST

When you set the BASS BOOST or TREBLE BOOST, the EQ is

automatically set to USER EQ.

NOTE

42 43

RECORD TYPE

Adjust the format to record. You can select one of MP3 or WAV.

You can also set it by using

or button at

recording standby mode.

BIT RATE

You can adjust recording quality by setting BIT RATE.

The higher BIT RATE is, the better the recorded sound is and the lower it is, the worse the recorded sound is.

This like to more clearly state that A higher BIT RATE increases file size and shortens recording space available.

The Bit Rate can range from 40Kbps to 320kbps. You can also set it by using

or button at recording standby mode.

The BIT RATE OPTION is only applied when recording as a form of MP3.

AGC ON : When voice recording, the level is

automatically controlled to help avoid distortion in the recording. Also, recordings from long distances will be improved.

AGC function is operated at voice recording mode.

REC MODE

How to UPGRADE?

1. Download the latest firmware upgrade file from www.iriveramerica.com

2. Extract the file and save it to the ROOT of the iHP-100 Series.

3. Connect the AC adapter to the iHP-100 Series.

(Caution: Only upgrade the firmware on the iHP-100 Series with the AC adapter

connected.)

4. Select the Firmware Upgrade on the MENU.

5. Click the NAVI/MENU button after selecting

YES on the Alert window.

6. Check whether your LCD window shows “Firmware Upgrading...”

7. Do not turn the player off or disconnect the player from the PC until the Firmware Upgrading is done. When the powergoesoff automatically ,theupgradeis done. After turning the player on, confirm the Firmware Upgraded operating.

Upgrade your firmware at www.iriveramerica.com.

What is FIRMWARE?

It is the operating system that works in the iHP-100 Series.

iRiver provides you with the latest and best features through Firmware Upgrade. Visit www.iriveramerica.com to upgrade your Firmware.

Road Safety

Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Avoid using headphones/earphones at high volume. Hearing experts advise against listening to continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

Consideration for others

Keep the volume at a moderate level. This will allow you to hear outside sound and to be considerate of the people around you.

Avoiddroppingorimpactingtheplayer.

The player is designed to operate while walking or running, but dropping or excessively impacting the player may cause damage.

Avoid contacting the player with water.

Damage to the internal parts of the player may occur if the player comes into contact with water. If your player gets wet, dry the outside with a soft cloth as soon as possible.

Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed.

Keep the player away from a material with strong magnetic forces. This can cause malfunction in the Hard Drive.

SAFETY

On Headphones and Earphones

Supported file types will have the extension MP3, WMA, ASF and WAV.

Folders and files are sorted in alphabetical order. The iHP-100 can store 1,000 folders and 5,000 files (Audio or data). Track information is displayed either filename or ID3 TAG information. Physical shock can cause bad sectors on the Hard Disk inside the

iHP Series. This can be recovered using Windows Scandisk. Possible to lose a data by an impact from the outside, an electricity

failure, or struck by lightening. A user will be responsible for the loss of the unsaved data and back up of the saved data.

Some earphone plugs may not fit the remote properly. Use the

included earphone extention if your headphones will not plug in properly.

CAUTION!

46 47

No Power

No sound is heard from the player or distortion is heard during playback.

Characters in LCD are corrupted.

Poor FM Reception.

Failed download of a file to the player

iHP will not charge properly

Check whether the battery is discharged. Check the operation after connecting AC Adapter.

Check whether VOLUME is set to “0”. Connect the remote control / earphone plug firmly. Check whether the plug is dirty (clean theplugwithadryandsoftcloth). Corrupted Audio file may have a noise or sound cut off.

Check out Menu

General Language and confirm whether the right language has been selected.(Refer to page 36)

Adjust the position of the player and earphones. Turn off the power of other electronic devices near the player. The headphone cord functions as the antenna, they must be plugged in for best reception.

Check the connection between your computer and the player to ensure that the cable is secure. Check the condition of the battery. Check the operation after connecting AC Adapter.

Check whether the adapter plug is

properly connected. Fully charged batteries will not accept charge, the player will appear not to enter charge mode.

Should any problem persist after you have checked these symptoms, consult your iRiver dealer or contact support at iRiver.com.

Remote Control

Headphones and foam covers

User Manual/ Warranty card

AC Adapter

Install CD

Line in / out Connection Cable

Earphone Extension Cable

USB Cable

Carrying Case

Accessories subject to change without notice and may vary from image shown.

48 49

20Hz~20KHz 20mW(L) +20mW(R) at 16 Max. Volume 90dB(L), 90dB(R)(When a MP3)

2dB

STEREO(L+R)

87.5MHz~108MHz 20mW(L) +20mW(R) at 16

Max. Volume 50dB Headphone/Earphone-Cord Antenna MPEG 1/2/2.5 Layer 3, WMA , ASF, WAV 32Kbps ~ 320Kbps ID3VI,ID3V22.0,ID3V23.0 DC 5V , 2A Approx. 60(W) x 19(D) x 105(H) mm Approx. 160 g 0

~40

Approx. 16 hours

Frequency/Range Headphone output S/N ratio

Frequency Characteristics

No. of Channels FM Frequency range

Headphone Output S/N ratio

Antenna File TYPE Bit Rate

Tag AC Adapter Dimension Weight Operational Temperature

MP3 / WMA / ASF

Specifications

Iriver H100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual