IRIS Woozoo TWF-C101, Woozoo TWF-C81T Series, TWF-C81, Woozoo TWF-C81 Series, TWF-C81T Series Manual

Woozoo® Tower Fan

CONTENT PAGE

by IRIS USA, Inc.
Series TWF-C101 / TWF-C81T / TWF-C81

Thank you for your purchase. Please read this instruction manual carefully to
ensure proper use. Read all safety precautions prior to use. Please store this
instruction manual in a safe place for future reference.

READ AND SAVE THESE INSTRUCTIONS

III

II

I

4

2

1(h)

*Demonstrated model is TWF-C81T

Safety Precautions ................... 1

Assembly .......................... 4

Parts ..............................5

Usage Instructions

How to Use ......................... 7

Cleaning and Maintenance ............. 9

Other

Troubleshooting .................... 10

Specifications ...................... 11

Limited Lifetime Warranty ............ 12

SAFETY PRECAUTIONS

Prior to use, please read the safety precautions carefully to ensure proper use. The precautions listed here are
described under classification of Warnings and Cautions, and are intended to prevent harm or damages to users
and other persons. All of these precautions are critical in terms of safety. Please follow them at all times.

Graphic Symbol Indications:

Indicates content that could lead to death or injury if handled incorrectly.

CAUTION

Disassembly prohibited.

• Do not disassemble, repair, or modify. Doing so can cause fire, electric shock, or injury.

• Repair by persons other than trained repair technicians can be dangerous.

• Warning: To reduce the risk of fire or electric shock, do not use this product with any solid-state speed
control device.

Product use.

• For household use only. Do not use for commercial use. Do not use for anything other than the intended
purposes. Do not use product for anything other than its inteded use. Doing so could cause the product to
malfunction or cause fire.

• Do not use the product near radio or televisions. Doing so may interfere with radio or television signals.

• Do not use in places exposed to direct sunlight or heating devices. Doing so may cause deformaton, color
change, or product malfunctions.

• Use on a level, stable floor. Placing product on uneven and unstable floors can cause the product to fall over,
leading to injury or damage to property in the vicinity of the product.

• Place the product in locations where it will not get entangled in curtains or hoisting strings, etc. Failing to do
so can cause damage to articles near the product.

• Always grasp the power plug to unplug it, do not unplug it by pulling on the power cord. Pulling on the power
cord can damage it, which can cause fire or electric shock.

• Always unplug the power plug from the electric socket when the product will be unused for extended periods
of time. Failing to do so can lead to fire or electric shock caused by short-circuits due to reduced insulation.

• This product employs overload protection (fuse). A blown fuse indicates an overload or a short-circuit. If the
fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit
may be present and the product should be discarded or returned to IRIS USA, Inc. for inspection and/or
repair.

• Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do
not run the cord under furniture or appliances. Arrange the cord away from high traffic areas and where it
will not be tripped over.

• Please dispose of product and packaging materials according to proper government regulations.

Remote use.

• Please pay attention to the polarity symbols of the remote battery. Please ensure the battery is inserted
according to the correct positive (+) and negative (-) markings.

• Remove the remote battery when the product will not be used for extended periods of time. Not doing so may
cause fire or injury, or damage to the surroundings from the battery rupturing and leaking.

• In case of battery liquid leaking, wipe down the battery case and insert a new battery. If the battery liquid
gets onto the skin, please wash thoroughly.

• Do not disassemble, repair, or modify. Doing so may cause damage to skin and clothes.

• Do not carry or store the remote alongside small metal objects. Doing so may cause fire or injury from the
battery rupturing and leaking.

PROHIBITED INSTRUCTIONS THAT MUST BE FOLLOWED

1 2

• Please use only the manufacturer recommended battery. Use of any other battery may cause risk of fire or
injury, or damage to the surroundings from the battery rupturing and leaking.

Unplug.

• Unplug the power plug from the electric socket when performing maintenance, inspecting, or moving the
product.

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

• Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.

Use power plugs and power cords correctly.

• Failing to do so can cause fire or electric shock due to short-circuits.

• Insert the power plug securely all the way into the electric socket.

• Regularly remove dust from the power plug.

• When dust is allowed to build up, insulation is hampered due to moisture, which can cause fire or electric
shock.

• Use only 120V AC. Other current/voltage can cause fires.

• Do not use if the power cord or the power plug is damaged, or if the power plug is loose when plugged into
the electric socket. Doing so can cause fire or electric shock due to short-circuit.

• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for
examination and/or repair.

Do not damage the power cord.

• Damaging, modifying, forcefully bending, pulling, twisting, putting heavy objects, or pinching can damage the
power cord, which can cause fire or electric shock.

• Do not use if the power cord is bundled up. Doing so can cause fires. Always extend the cord out before
using.

• Do not pull on the power cord when carrying or storing the product. Pulling on the power cord can cause fire
or electric shock.

Abnormalities and malfunctions can cause smoke, re, or electric shock.

Stop use immediately, cut power, and unplug from the electric socket when abnormalities or malfunctions occur.

Examples of Abnormalities

• Abnormal sounds or odors.

• Power plug or power cord become abnormally hot.

• Loss of power, etc. when power cord is moved.

• The product periodically stops during operation.

• Tingling sensation from electric current felt when the product is touched.

• Stop use and contact IRIS USA, Inc. customer service at 1-800-320-4747.

Avoid re hazards.

• Do not spray with insecticides, hair sprays, or lubrication oils, etc.

• Do not use near flammable substances (kerosene, gasoline, paint thinner, etc.), objects that have flames
(cigarettes, incense, etc.) or combustible materials. Can cause fires.

• Do not use the product with air flow pointed at a combustible appliance such as a heater. Doing so can cause
incomplete combustion or scatter flames, which can cause carbon monoxide poisoning and fire.

ASSEMBLY

Wet hands prohibited.

• Do not unplug power plug when hands are wet.

Do not use the product outdoors.

• Do not use in the vicinity of objects that obstruct the flow of air.

• Do not operate while covered or blocked with cloth, paper, or plastic bags, etc.

• Do not use in locations where there is a lot of dirt or dust. This can cause short-circuit or fire.

• Do not use in or near environments filled with sooty air. Doing so may cause a fire.

• Do not use in rooms with high humidity levels such as bathrooms.

• Do not get the unit wet, or put the unit in water. Getting the product wet can cause fire or electric shock.

If handled incorrectly, contents can lead to personal injury or physical damage.

• Keep out of reach of children and infants.

• Do not climb on or tip the product over. Doing so may lead to injury or electric shock.

• Make sure to hold the handle while moving product. Do not drag the product when moving it. Dragging
product can damage carpet and floors.

• Do not point air flow directly at your body. It generates a very strong air flow.

• Be especially mindful not to allow children or elderly people near product. Being near the product can be
harmful to their physical condition and to their health.

• Air blowing directly on plants may be harmful.

• Do not strike the unit forcefully. Doing so can cause the product to malfunction, leading to fire or electric
shock.

User Servicing Instructions

• If the fuse on your fan has blown, grasp the plug and remove it from the outlet. Do not pull the cord to unplug.

• To open, slide the fuse cover towards the prongs of the plug.

• Carefully remove the old fuse and snap the replacement fuse into place. To reduce the risk of fire, only
replace the fuse with another fuse of the proper rating (2.5Amp, 120Volt). Slide the fuse door back into place
to close. Discard the blown fuse. The plug should now be ready for normal use.

• Risk of fire. Do not replace the attachment plug. Product contains a safety device (fuse) that should not be
removed. Discard the product if the attachment plug is damaged.

• If you need further information on how or when to replace the fuse in plug, please contact IRIS USA, Inc.
customer service at 1-800-320-4747.

The tower fan comes disassembled. Please follow the instructions for proper assembly. The packaging materials
can be used for storing the product when not in use.

CAUTION

Do not plug the power plug in or operated the product before the product has been assembled.

1 Remove the screws from the main body.

• Lay the main body flat and remove the screws attached to the
bottom of the product.

2 Install the base.

• Pull the cord through the center hole of the base.

• Fit the tabs of the back base through the holes of the front base
until the claws on the back base click firmly into place with the
front base.

Claw

Base (back)

Tabs

Pull the power

cord through

Base (front)

Hole

3 Attach the base to the main body.

• Align the screw holes of the assembled base with the screw holes
on the bottom of the main body. Fasten the base to the body with
the previously removed screws.

• The front of the base should align with the front of the main body,
otherwise the product cannot be assembled.

• The product cannot be assembled on the ground. Please assemble
the product with the main body elevated to allow room for the
base to be installed.

CAUTION

Please make sure that the power cord is not smashed between the base and the main body.

4 Pull the power cord through the cord control tab.

• After assembly, place the product upright to confirm that the base
is firmly attached.

43

Power cord

Power cord control

PARTS

Control Panel

Remote Receiver

Adjustable Vent (upper)

(only TWF-C81T)

Air Outlet

Adjustable Vent (lower)

(only TWF-C81T)

Base

III

II

I

4

2

1(h)

Front Back

Control Panel

Breeze setting button and indicator light.
Indicator light turns on and natural breeze
pattern operation starts when the breeze
setting button is pressed.

Air flow strength button and indicator light.
Pressing the air flow strength button
changes the air flow strength as follows:

Medium HighLow

Remote Control

Remote control.
To use the remote, please point the infrared
sensor at the remote receiver on the front
of the main body.

Handle

Remote Control Holder

(storage spot for remote control)

1(h)

2

4

I

II

III

Air Entry
Port Cover

Power button.
Product will begin operating on
the last setting used. Press the button
during operation to turn the product off.

Air flow strength button.
Press the button to select
desired air flow during operation.

Breeze setting button.

III

III

II

II

I

I

Press the button to select the desired
natural breeze setting.

Timer button.
Press the button to choose the desired
run time. To clear off the timer, press
the button again.

Air Entry Port

Oscillation button.
Press the button to turn the left and right
oscillation on or off.

Changing Out The Battery

Please replace the battery with a CR2025 battery when the product takes a long time to respond or stops

Power Plug

responding when the operation buttons are pressed.

1 Pull out the battery holder.

Hold the claw in to close the gap and pull the

Power Cord

Oscillation button.
Press the oscillation button to start product
oscillation. Press the oscillation button again
to stop product oscillation.

holder out.

2 Insert a new battery.

Insert a new battery into the battery holder. Make

III

II

I

4

2

1(h)

Timer button and indicator light.
Pressing timer button changes
the preset time as follows:

2 4

1 (h)

Timer o

sure the battery is facing the correct direction.
Insert the battery holder back into the remote
control.

• Please pay attention to which side is front
and which is back.

• Please dispose battery according to the

Claw

①

Hold and pull it out

Back

②

Battery holder

Up

(Positive side is up)

disposal recommendation on the battery
packaging or proper governmental
regulations.

Power button.
Press the power button to turn the product on.
Press the power button again to turn the product off.

CAUTION

Improper handling of the battery can lead to battery rupture, leaking battery liquid, and damage to
the surroundings. Please read the ‘Remote use’ section of the safety precautions before use.

5 6

HOW TO USE

Place the Product

Place the product upright on a stable surface and
insert the power plug into the electrical outlet.

Start the Product

Press the power button to turn the product on.

• The product will start running at the last setting
used if the power plug has not been pulled out.

• The product can also be turned on using the
power button on the remote control.

Select the Preferred Air Flow Strength

• Pressing the air flow strength button lights the
indicator light and changes the air flow strength
as follows:

Medium HighLow

Stop the Product

Press the power button during operation to turn the
product off.

Select Natural Breeze Pattern

Replicates breeze patterns by changing the strength
of the air flow.

• Press the breeze setting button to start the
natural breeze pattern.

• The air flow strength can still be changed once
breeze pattern has been selected by pressing
the air flow strength button.

• Press the breeze setting button again to turn
the indicator light off and return the product to
normal operation.

• Three breeze pattern setting buttons on the
remote automatically adjust the breeze pattern
according to air flow strength.

III

II

I

• To return to normal operation using the remote,
please press the desired air flow strength
button.

Start Timer

Pressing timer button changes the preset time as
follows:

2 4

1 (h)

Timer o

4

2

1(h)

While the timer is running, the indicator light will
change according to time remaining. When time runs
out, the product will turn off and stop running.

2 1 (h)

4

Product o

Select Oscillation

Press the oscillation button to start product
oscillation. Press the oscillation button again to stop
product oscillation.

• The left and right oscillation cannot be done
manually. Please use the oscillation button
to change the angle of the product. Forcibly
changing the angle will damage the product.

Upper and Lower Adjustable Vents (TWF-C81T Only)

Change direction of air flow by manually moving the
adjustable air vents.

45°

7 8

Adjustable vent

(upper)

Adjustable vent

(lower)

CLEANING AND MAINTENANCE TROUBLESHOOTING

Unplug the power plug from the electric socket before cleaning.

CAUTION

Use of strong cleaning agents such as amylacetic ester, alcohol, oil, etc. can cause fading,
deformation or breakdown.

Air Entry Port and Air Outlet

If dust has accumulated in Air Entry Port or Air Outlet,
use a vacuum cleaner to clean it.

The air entry port cover can also be removed for
cleaning.

Before making repairs, please read the following content carefully to fix common problems.

STATUS POSSIBLE CAUSE REMEDY

No power

(Indicator is off)

Product operation cannot be

controlled by remote

Product makes loud noise

while operating

Low air ow strength

Product makes loud noise

while oscillating

Problems that could not be resolved.
Please contact the dealer of purchase or IRIS USA, Inc. Customer Service.

Do not disassemble, repair or modify the product yourself. Any other servicing should be preformed by any

Warning:

Power plug is not securely plugged into the
electric socket.

Battery power is low. Please insert a new battery.

Direction of polarity of the battery is placed
incorrectly.

Something is blocking the infrared sensor and
the remote receiver.

The remote isn’t facing the correct direction.

The product is placed on an uneven surface. Place the product on a level, stable surface.

Dust has accumulated. Please clean to remove the dust.

During oscillation, motor sounds will increase. This is normal.

authorized service representative.

Please plug the power plug securely into the
electric socket.

Please ensure the battery is inserted correctly.

Please ensure there is a clear path between
the sensor and the receiver.

Point the sensor on the remote at the remote
receiver on the main body from a maximum
of 16.4 ft/5.0 m away.

Main Body

Use a soft cloth to wipe off the dust.
If the dust is hard to remove, wipe with a cloth

soaked in mild neutral detergent and then wipe off
the detergent with a fully wrung cloth.

Storage

If product is not in use for extended periods of time,
cover the product and store in places with low
humidity and no direct sunlight.

9 10

SPECIFICATIONS

LIMITED LIFETIME WARRANTY

MODEL SPECIFICATIONS

RAT ED VOLTAGE

RATED CURRENT

RATED FREQUENCY

PRODUCT SIZE
(NOT INCLUDING
THE POWER CORD)

PRODUCT WEIGHT

POWER CORD LENGTH

*Specifications are subject to change without prior notice.

TW F-C101 Base diameter 12.99 in/330 mm x Height 39.29 in/998 mm

TWF-C81T Base diameter 8.66 in/220 mm x Height 31.50 in/800 mm

TWF-C81 Base diameter 8.66 in/220 mm x Height 31.50 in/800 mm

TW F-C101 7.7 lbs/3.5 kg

TWF-C81T 6.8 lbs/3.1 kg

TWF-C81

120 VAC

0.3 A

60 Hz

6.6 lbs/3.0 kg

About 70.9 in/1.8 m

Product Used Over Long Periods of Time

If any of the following problems occur due to use over long periods of time, cut power immediately, unplug
from the electric socket, and contact IRIS USA, Inc. customer service at 1-800-320-4747.

• There is no response when power switch is pressed.

• Product makes a strange noise when operating.

• While turning, the vane changes speed irregularly.

• Power cord is bent or damaged.

• Power turns on and off when power cord is touched.

• Product gives off a burnt smell.

Various factors can have an impact on the product degradation and malfunction.

WARNING

If abnormalities like those listed above occur even when the product has not been used for the
displayed standard period of use, stop use immediately and contact IRIS USA, Inc. customer service at
1-800-320-4747.

THE MANUFACTURER WARRANTS

Your IRIS USA, Inc. products are to be free from defects in material and workmanship under normal
non-commercial, household use, when operated and cared for in accordance with the Manufacturer’s written
instructions provided.

THE LIMITED LIFETIME WARRANTY (“WARRANTY”) DOES NOT COVER

Any damage caused by accident, misuse, or abuse, including without limitation, damage caused by use in a humid
area, improper cleaning, neglect, alteration, fire, theft, non-recommended temperature use and does not apply to
minor imperfections, scratches, stains, discoloration, surface markings as a result of shipping or other damage to
external or internal surfaces which does not impair the utility and/or functionality of the product.

TO OBTAIN SERVICE

If service should be necessary, you should contact IRIS USA, Inc. Customer Service (“Customer Service”) at
1-800-320-4747. You may then return the properly packaged product(s), (using adequate packing and shipping
material to prevent damage in transit), with postage prepaid along with name, address, telephone number, model
number, and proof of date of purchase (a copy of the receipt) and a detailed description of the claimed defect. This
warranty shall not cover any damage incurred to the products during transit to Customer Service. You shall have
the obligation and responsibility to: pay for all services and parts not covered by the warranty.

MANUFACTURER’S OBLIGATION

The Warranty may not be altered, expanded, extended, revised or varied except by written instrument executed by
the Manufacturer.

THE MANUFACTURER’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF
THE DEFECTIVE PRODUCT(S) AT THE MANUFACTURER’S SOLE AND EXCLUSIVE OPTION. THE MANUFACTURER
WILL REPLACE ANY ITEM FOUND TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITH THE MOST
COMPARABLE CURRENT ITEM. IRIS USA, INC. DOES NOT ACCEPT SPECIAL REQUESTS, NOR DO WE HAVE
THE ABILITY TO UPGRADE IN EXCHANGE FOR MONEY. THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER DIRECT OR INDIRECT. THE WARRANTIES SET
FORTH HEREIN ARE EXCLUSIVE AND NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE ARE
MADE WITH RESPECT TO THE PRODUCTS.

Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above
limitation exclusions may not apply. This Warranty gives specific legal rights, and there may also be other rights
which vary from state to state.

DISCONTINUED ITEM RETURNED

If the item returned is discontinued and is no longer available, IRIS USA, Inc. will automatically replace your item
with the most comparable item currently manufactured.

Attn: Customer Service (Returns Department)
IRIS USA, Inc.
13423 West Cactus Road
Surprise, AZ 85379
©2017 IRIS USA, Inc. All rights reserved.

11 12