IRIS digital video system, SiteWatch Quick Reference Manual

watch

site

www.iris-dvs.com

reference

guide

quick

Template

Note: This template is to be

used for the purpose of

mounting the product.

For SiteWatch Technical

Assistance Call:

IRIS Digital Video Systems

8:30am - 5:00pm CST

888.451.4646

www.iris-dvs.com

3 3/32”

9 15/16”

IRIS SiteWatch Installation Steps

Review IRIS SiteWatch Quick Reference Guide (QRG)

Review contents of SiteWatch Kit

If needed, program Cameras with I.P. address, password, log-on,
and resolution

Mount SiteWatch & UPS

Mount Cameras

Route cabling keeping good installation practices in mind

Connect UPS to SiteWatch

Connect cables, power, mouse, keyboard, monitor, network

Connect Cameras using cross-over cables and couplers

Connect power to Cameras

Connect LAN with straight patch cable (CAT 5)

Power-up UPS and SiteWatch system

If needed, configure number and type of Cameras,
enable SiteWatch ports and remote monitoring

Enable ATM NightWatch

Confirm ATM transaction capture

Set-up new site in IRIS Inquiry

Train customer on SiteWatch operation

Verify customer can connect with IRIS Inquiry

Review content of IRIS Manuals with customer

Factory Pre-programming

This SiteWatch may have been configured at the factory.

Do not change settings unless adding camera(s).