Page 1
Page 2
Thank you for purchasing the Ionmax ION310 Air Purifier. The ION310
can help to improve the indoor air quality in your home or office. Please
read this manual carefully before use to ensure proper usage and save
these instructions for future reference.
FUNCTIONS AND FEATURES .................................................. 1-2
CONTROL PANEL AND OPERATION ........................................ 2-3
CLEANING AND MAINTENANCE .............................................. 3-6
SAFETY INSTRUCTIONS ............................................................. 7
PRODUCT SPECIFICATION ......................................................... 8
WARRANTY DETAILS ................................................................... 9
Functions:
Pre-filter – Removes large airborne particles such as hair, dust and pet
dander. Also helps to enhance the durability and performance of other filters.
Electrostatic Precipitator (ESP) – An electrostatic dust collector that uses an
electrostatic field to charge and absorb airborne particles larger than 0.01
microns. It traps heavy metals that may cause cancer such as lead and
cadmium, while killing bacteria and eliminating infectious diseases.
Activated carbon filter – Consists of a vast system of pores that are highly
adsorbent and bonds to odorous, gaseous such as formaldehyde, benzene,
ammonia, VOCs (Volatile Organic Compounds) and liquid contaminants.
Photocatalytic filter – Breaks down harmful pollutants including bacteria and
VOCs (Volatile Organic Compounds) such as formaldehyde, ammonia and
other common contaminants released by building materials and household
cleaners generally found in the home.
Built-in ioniser - Revitalises the air by releasing negative ions in just the right
concentration to keep the air fresh.
254nm UV lamp - Uses just the right amount of energy to break down organic
molecular bonds. Kills micro-organisms such as germs, viruses, bacteria,
fungi and mould.
1.
2.
3.
4.
5.
6.
1. Pre-filter
4. Photocatalyst filter
Control panel
Aroma Diffuser
5. Built-in ioniser
6. 254nm UV lamp
3. Carbon filter
2. ESP Device
1
Page 3
Features:
Collects and removes unwanted particles from air including dust, mildew,
fungus, viruses, allergens, pollen, smoke, odours and pet dander
Easy filter maintenance
Releases negative ions to revitalise and freshen the air
Silent fan
Portable and easy to operate
Low power consumption
Hi and Low fan speeds
Built-in soothing night light
Aroma diffuser feature
•
•
•
•
•
•
•
•
•
Photocatalyst filter
Carbon filter
Dust collector
ESP Device
CONTROL PANEL AND OPERATION
CLEANING AND MAINTENANCE
Plug the unit into an electrical outlet.
Press the ‘Power’ button on the control panel. This will start the air purifier on
High speed and turn on the UV lamp and Static/Ion functions.
Press the ‘Mode’ button to switch between High or Low speed.
Press the ‘UV’ button to switch the UV lamp on or off.
Press the ‘STATIC/ION’ button to switch the electrostatic dust collector and
negative ioniser on or off.
Using the aroma diffuser – Ensure that the unit is switched off and the power
supply is disconnected. Remove the front cover and pull out the aroma diffuser
container at the bottom of the unit. Insert a few drops of essential oil onto the
sponge in the container. Place it back into the unit and switch on the unit.
Removing the filters
Disconnect the unit from power supply before detaching or installing any parts.
Open the front cover and pull it outwards in the direction shown in the diagram
below.
1.
2.
3.
4.
5.
6.
1.
2 3
Page 4
Cleaning the pre-filter
Remove the pre-filter from the unit, shake off any dust and wash it with clean water.
Cleaning the dust collector
Clean the dust collector with hot water. After a few minutes, dry it using a hairdryer.
Removing and Attaching the UV lamp*
Removing the UV lamp: Disconnect the unit from the power supply, and then
remove the front cover and all the filters. Allow the UV lamp to cool down for 15
minutes. Then hold both ends of the UV lamp and take it out.
Pull out the electrostatic dust collector.
Remove the rest of the filters in the unit from the bottom, as indicated in the
diagram.
2.
3.
4 5
Page 5
.
IMPORTANT INFORMATION: Please exercise caution when operating this
appliance. Kindly read the warnings below to prevent electrical shock,
injury, fire hazards or inconveniences.
Do not use the unit outdoors.
Keep the unit away from direct sunlight.
Keep the unit on a flat, stable surface.
Use the proper voltage specified suitable for this product.
Do not let children operate this unit without adult supervision.
Always disconnect the unit from power supply before removing internal parts
for cleaning.
Do not touch any parts within the unit during operation to prevent injury or
damage.
Do not open the casing of this unit to prevent causing injury and nullifying
warranty.
Never wash the unit with water or touch it with wet hands.
Do not use the unit in bathrooms, humid areas, near fireplaces, or place it in
proximity to flammable or combustible products.
Do not place any objects on top of the unit or sit on top of the unit.
Do not block the air intake and outtake of the unit to prevent possible damage.
Do not use the unit in the kitchen. Ashes from the cooker may follow air
circulation into the unit, leaving oil and dust residues on the unit and its
surrounding area.
Never operate the unit if the plug or cord is damaged. Please contact the
authorised distributor or qualified technicians to replace the damaged parts.
Always turn off and unplug the unit when not in use over a long period of time.
Hold the secured portion of the plug and remove it from the power outlet
gently.
Do not place the power cord near any heat sources.
Keep yourself at a safe distance while the unit is running to prevent hairs,
fingers, clothing and accessories from getting into the unit.
Ensure that the plug has a proper grounding system.
Check the product and clean the unit regularly to prevent excessive deposits
from setting off sparks and causing a fire.
Do not operate the unit without a filter or with a damaged filter. Direct exposure
to the UV light from the UV lamp can cause severe damage to eyes and cause
blindness.
SAFETY INSTRUCTIONS
Attaching the UV lamp: Holding two ends of the UV lamp, insert the copper
parts of the lamp into the lamp holder. Then replace all the filters into the unit
following the proper sequence as mentioned above.
Caution: Do not touch the middle part of the lamp. Oil from your fingers will
decrease the effectiveness of the lamp.
*Please take care when handling the UV lamp so as not to damage the lamp
leads.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6 7
Page 6
Model: Ionmax ION310
Voltage: 120–230V
Power consumption: 8W
Air Flow: 30m
3
/hour
Coverage Area: 10m
2
Dimensions: 141 x 118 x 262 mm
Weight: 0.82 kg
PRODUCT SPECIFICATION
8 9
Loading...