Page 1
DESICCANT
DEHUMIDIFIERS
ION612 & ION632
Product Brochure
Version 2.2. Updated 04.08.2015.
Page 2
An Introduction to
Desiccant Dehumidifiers
Dry air out
Desiccant Rotor
Heater
Heat Exchanger
Humid
room air in
Water Tank
Desiccant rotor dehumidifiers use a desiccant (a substance that adsorbs water
in a vapour state) that is mounted on a rotating wheel (called a rotor). In the
Ionmax ION612 and ION632, the desiccant material used is Zeolite.
As the wheel turns, the incoming air passes through the desiccant where the
moisture is adsorbed (collected onto the wheel surface) and the dried air is
left to flow out. A flow of warm air is then passed through the desiccant wheel
to ‘regenerate’ it and expel the moisture from its surface. The moisture is
collected in the dehumidifier’s water tank or drained out through a hose. The
wheel continues to rotate and the adsorption process is repeated.
The adsorption principle used in desiccant rotor dehumidifiers make them
especially suited for high humidity levels even at low temperatures. Unlike
other types of dehumidifiers, desiccant dehumidifiers are more stable across
all temperatures and can reduce humidity to much lower levels. They also
require little maintenance and are quieter and lighter compared to compressor
type dehumidifiers.
For more information please contact Andatech’s office:
Call us on 1300 800 200 Email: [email protected] Website: www.andatech.com.au
Page 3
Moisture Control Dehumidifier
ION612
The Ionmax Ion612 Dehumidifier helps to control the humidity
of the air, acting as a desiccant to keep excessive moisture at
bay. The Ion612 can remove 7 litres (20°C RH60%) of moisture
per day, utilising a 3D automatic louvre to channel airflow over a
wide area or spot to optimise its efficiency.
2.0
Litres
Built-in Ioniser
Extraction Rate
7 Litres/Day
Tank Capacity
It also features a built-in ioniser and
silv er nano technology
filter that kills bacteria on contact, greatly enhancing the quality
of indoor air. Efficient, eco-friendly and quiet, the Ionmax Ion612
is perfect for home use.
FEATURES
1°C
40°C
Silver Nano Filter
Technology
Laundry Mode
Stable Performance in Both
Low and High Temperatures
Timer up to 8 hours
Quiet Operation
Light and Portable
Voltage
Power Consumption
Working Temperature
Moisture Removal
Tank Capacity 2 litres
240V
360 - 620W
1°C - 40°C
7 litres a day
(at 20°C RH60%)
For more information please contact Andatech’s office:
Call us on 1300 800 200 Email: [email protected] Website: www.andatech.com.au
SPECIFICATIONS
Net Dimensions
(W x D x H)
Gross Dimensions
(W x D x H)
6 kgsNet Weight
290mm x 175mm x 475 mm
350mm x 229mm x 545 mm
Page 4
Moisture Control Dehumidifier
ION632
The Ionmax Ion632 Dehumidifier controls the humidity in
your environment efficiently while staying environmentally
friendly. It features a CFC-free desiccant rotor, air filter,
and various safety functions. Sturdy and durable, the
Ionmax Ion632 is perfect for daily use in removing mould
and dampness, drying clothes, and improving the air
quality in your home and office. Being able to remove 10
litres of moisture per day (20°C RH60%) while staying
energy efficient, the Ion632 dehumidifier is ideal for daily
industrial use.
FEATURES
Extraction Rate
10 Litres/Day
3.5
Litres
Voltage
Power Consumption
Working Temperature
Moisture Removal
Tank Capacity
Air Filter
1°C
40°C
SPECIFICATIONS
240V
400 - 720W
1°C - 40°C
10 litres a day
(at 20°C RH60%)
Timer up to 8 hours
Laundry Mode
Stable Performance in Both
Low and High Temperatures
Net Dimensions
(W x D x H)
Gross Dimensions
(W x D x H)
Quiet Operation
Light and Portable
8.4 kgsNet Weight
416mm x 186mm x 520 mm
491mm x 260mm x 623 mm
Tank Capacity 3.5 litres
For more information please contact Andatech’s office:
Call us on 1300 800 200 Email: [email protected] Website: www.andatech.com.au
Loading...