ION Audio ISP75A User Manual

Draft 03. Do not distribute.

Quickstart Guide (English)

Box Contents

If an individual speaker was purchased:		If a boxed pair was purchased:
1	Solar Rock Speaker	2 Solar Rock Speakers
1	Charging Adapter	2 Charging Adapters
Quickstart Guide		Quickstart Guide

Support

Thank you for purchasing the Solar Rock Speaker. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Note: Solar Rock Speaker should be fully charged prior to first use for maximum battery life. Once fully charged, Solar Rock Speaker’s solar panel can provide suitable power for typical daily use without the need to connect the charging adapter. Results will vary depending on daily number of hours Solar Rock Speaker is exposed to direct sunlight.

Main Controls (Back Panel)

6 7 8

1		LINK
		LINK
	2	3

1. Power button: Hold this button to power Solar Rock Speaker on and off. If you would like to disable (or enable) the “Power On” voice prompt, briefly press the Bluetooth and Link buttons at the same time.

Note: Solar Rock Speaker will automatically power off after 15 minutes if no audio is playing.

2. Bluetooth button: Press and hold this button for 2 seconds to disconnect a paired Bluetooth device.

3. Link button: Press and hold this button for two seconds to switch between Master Mode and Linking Mode. See the sections that follow for more details on the two modes.

4. Charging Adapter Input: Insert the included charging adapter here to charge the Solar Rock Speaker battery.

5. Reset button: If Solar Rock Speaker is working abnormally, reboot Solar Rock Speaker using the power button. If this doesn’t work, shutdown the unit by gently pushing a narrow, sharp object into the Reset hole located here.

6. Charging LED: This LED will be solid red when the battery is charging and will turn off if the battery is fully charged or if no adapter is connected.

7. Bluetooth LED: This LED will blink while Solar Rock Speaker is searching for Bluetooth audio devices; it will be lit solid when a Bluetooth device is connected.

8. Link LED: This LED will be green when the speaker is in Link Mode and blue when the speaker is in Master Mode.

Master Mode vs. Link Mode

Solar Rock Speaker can be operated as a lone unit or while linked to additional Solar Rock Speaker speakers. How you’re using your speaker determines what mode it should be in:

•If you would like to listen to music through only one Solar Rock Speaker, enter the speaker in Master Mode and connect it to a Bluetooth device.

•If you would like to listen to music through multiple Solar Rock Speakers, enter one of the speakers in Master Mode and connect it to a Bluetooth device. Then enter the other speaker(s) in Link Mode and connect them to the master speaker.

Press and hold the Link button to switch between Master and Link Mode. In Master Mode, the Link LED will be blue. In Link Mode, the LED will be green. When powered on, Solar Rock Speaker enters the last used mode.

See the sections to the right for instructions on pairing and linking.

Pairing with a Bluetooth Audio Device

1.Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. / 30.5 m away).

2.Power on Solar Rock Speaker by holding down the Power button.

3.Make sure the speaker is in Master Mode by checking if the Link LED is blue. If the Link LED is green, press and hold the Link button for 2 seconds to switch from Master Mode to Link Mode.

4.If you are connecting your Bluetooth audio device for the first time, navigate to your device’s Bluetooth setup screen; then find and select Solar Rock Speaker.

If you have previously connected the Bluetooth audio device with the speaker, the Bluetooth device and speaker should pair automatically.

While the speaker is searching for a Bluetooth device to pair with, the Bluetooth LED will flash. Once the speaker is successfully paired with a Bluetooth device, the Bluetooth LED will be solidly lit.

Note: If you have trouble pairing, select to “Forget” Solar Rock Speaker in your Bluetooth device’s settings and then try pairing again.

To disconnect Solar Rock Speaker from a paired Bluetooth device, press and hold the Bluetooth button on the speaker.

If you would like to disable (or enable) the Bluetooth pairing voice prompts, briefly press the Bluetooth and Link buttons at the same time.

Linking Additional Speakers to the Master Speaker

1.Make sure the additional speaker(s) you would like to link to the master speaker is within range of the master speaker (no more than 100 feet / 30.5 m away).

2.Power on the additional speaker(s) you would like to link to the master speaker.

3.Make sure that the additional speaker(s) is in Link Mode by checking if the Link LED is green. If the Link LED is blue, press and hold the Link button for two seconds to switch from Master Mode to Link Mode. The speakers will then automatically link, and the audio playing from the master speaker will begin playing from the linked speaker(s).

If you would like to disable (or enable) the Linking voice prompts, briefly press the

Bluetooth and Link buttons at the same time.

Technical Specifications

Speaker Output	30 W (peak)

Power	Via power adapter or solar panel
	Power adapter: 15V DC, 2000mA, center-positive
	Solar panel: 1 W output

Battery	Type: 12V sealed lead acid (non-spillable)
	Battery Life: up to 35 hours*
	Recharge Time: 6 hours

Driver	6.5”; 165 mm

Water-Resistant Class	IPX4

Supported Bluetooth	A2DP
Profile

Bluetooth Range	Up to 100 ft. / 30.5 m**

Linked Range	Up to 100 ft. / 30.5 m**

Dimensions	10.75” x 9”x 9” / 273 mm x 229 mm x 229 mm
(width x depth x height)

Weight	9.2 lbs. / 4.17 kg

Specifications are subject to change without notice.

*Battery life may vary based on temperature, age, and volume usage of product.

**Available range is affected by walls, obstructions, and movement. For optimal performance, place the product so it is unobstructed by walls, furniture, etc.

Important Safety Instructions

& Warranty Information

English ( 3 – 7 )

Instrucciones importantes de seguridad e información de la garantía

Español ( 8 – 11 )

Instructions importantes de sécurité

et informations de garantie

Français ( 12 – 15 )

Istruzioni importanti di sicurezza e le informazioni della garanzia

Italiano ( 16 – 19 )

Wichtige Sicherheitsanweisungen

und Garantieinformationen

Deutsch ( 20 – 23 )

ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries.

NEMA® is the registered trademark and service mark of the National Electrical Manufacturers Association. All other product names, company names, trademarks, or trade names are those of their respective owners.

Product Warranty

(for products purchased in the U.S.A.)

1.What is covered and for how long?

All Products: ION Audio, LLC (“ION Audio”) warrants to the original purchaser that ION Audio products and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized ION Audio dealer and continuing for the following period of time after that date for ninety (90) days. ION Audio warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable.

2.What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: (a) damage caused by improper installation or improper connection to any peripheral; (b) damage caused by an external electrical fault; (c) damage from use of parts not manufactured or sold by ION Audio; (d) product purchased from anyone other than an ION Audio authorized dealer; (e) modifications to product not approved in writing by ION Audio; (f) equipment that has the serial number removed or made illegible; (g) normal cosmetic and mechanical wear; (h) damage or loss during transit to an Authorized ION Audio Repair Center; or (i) units that are purchased and/or located outside of the continental USA.

3.What are ION Audio’s obligations? During the applicable warranty period, ION Audio will repair or replace, at ION Audio’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, purchaser must first contact ION Audio and obtain a return merchant authorization (“RMA”) number. Purchaser must then return the product to ION Audio in an adequate container for shipping, accompanied by purchaser’s sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller’s name and address. To obtain an RMA number and assistance on where to return the product, contact ION Audio customer service at 401-658-3743. Upon receipt, ION Audio will repair or replace the defective products. ION Audio may, at ION Audio’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment become the property of ION Audio. If ION Audio determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such product.

4.What are the limits on ION Audio’s liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO ION AUDIO’S OWN NEGLIGENCE, EVEN IF ION AUDIO OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ION AUDIO PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

This Limited Warranty allocates risk of product failure between purchaser and ION Audio, and ION Audio’s product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of ION Audio are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on ION Audio. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by ION Audio and should not be relied upon.

5.How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.

This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Go to our website ionaudio.com to register your product with us.

Model:	Purchased From:
Serial Number:	Date of Purchase:
	3

Product Warranty

(for products purchased outside of the U.S.A.)

1.ION Audio, LLC (“ION Audio”) warrants to the original purchaser that ION Audio products are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized ION Audio dealer and continuing for the following period of time after that date for (1) Year.

2.This Limited Warranty is conditioned upon proper use of the product by the purchaser.

This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, or service of the products.

3.During the applicable warranty period, ION Audio will repair or replace, at ION Audio’s sole discretion, without charge to the purchaser, any defective component part of the product. ION Audio may, at ION Audio’s sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product.

4.THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO ION AUDIO’S OWN NEGLIGENCE, EVEN IF ION AUDIO OR ITS AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ION AUDIO’S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

Model:	Purchased From:
Serial Number:	Date of Purchase:
	4

Return Information

•A return merchant authorization number must be obtained from your local ION Audio representative. For your representative go to ionaudio.com.

•A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.

•The faulty equipment must be packed in its original packaging.

•One additional outer layer of packaging must be included to ensure product safety. Failure to do so may inadequately protect the equipment in transit and therefore jeopardize the warranty.

•ION Audio will not accept COD shipments and no call tags will be issued for merchandise return.

•ION Audio will not return repaired merchandise to customers by priority service except by written request at the customer’s cost. Requests must be submitted in writing with returned merchandise.

•The defective ION Audio equipment should be sent freight prepaid with the return merchant authorization number printed clearly on the outer packaging and original sales receipt enclosed to your local service center.

Important Safety Instructions

1.Read and keep these instructions. Heed all warnings and follow all Instructions.

2.Do not use this apparatus near water (if applicable).

3.Clean only with dry cloth.

4.Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.

5.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.

6.Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7.(If applicable) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

8.Only use attachment/accessories specified by the manufacturer.

9.Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

10. Unplug this apparatus during lightning storms or when unused for long periods of time.

11.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

12.Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

13.Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and reequipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

14.Water and Moisture (if applicable): This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

15.Caution (if applicable): Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposes to excessive heat such as sunshine, fire, etc.

16.(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

17.Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective

earthing connection.

•Denmark (Danmark): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.

•Finland (Suomi): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

•Norway (Norge): Apparatet må tilkoples jordet stikkontakt.

•Sweden (Sverige): Apparaten skall anslutas till jordat uttag.

18.For Class II apparatus only: This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

19.Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.

20.Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.

21.This apparatus is for professional use only. Intended operational climate: moderate.

22.(If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

23. Warning (if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods.

24.Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.

25.Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.

Service Instructions

•Disconnect power cord before servicing.

•Replace critical components only with factory parts or recommended equivalents.

•For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER.

NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or (f) consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

For Canadian models

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

. Operation is subject to the following two conditions: (1) this

device may not cause interference, and ( 2) this device must accept any interference, including interference that may cause undesired operation of the device.

•Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

• This radio transmitter ( identify the device by certification number, or model number if Category II) has been approved by Indus try Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

•This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

•This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC- 2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands.

Wireless Microphone (if applicable): This device complies with Part 15 of th e FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

For wireless products supporting the 5G frequency band (if applicable): Usage of the 5.15–5.25 GHz band are restricted to indoor operation only. This applies to the followi ng countries: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU , HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, FI, SE, CH, UK, HR.

ESD /EFT Warning : This unit may contain a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static el ectricity may cause it to lock up. In the unlikely event that t his should happen, turn off the unit, wait at least five seconds, and then turn it back on again. The pins of connectors identified with this ESD warning symbol should not be touched.

For best audio quality, avoid using this device in a high RF-radiated environment. In an environment with radio frequency inter ference, the unit may malfunction and resume normal operation after removal of the interference.

For 240-volt use in U.K., use NEMA ® -style 240-volt plug. For other countries use proper plug for local outlet.

Double-Insulated : When servicing use only identical replacement parts.

Correct Disposal of This Product : This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was pu rchased. They can take this product for environmentally safe recycling.

If apparatus contains a coin /button-cell battery: Warning : Do not ingest the battery— chemical burn hazard. The remote control supplied with this product contains a coin/button-cell battery. If the coin/button-cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Disposal of Batteries (if applicable):

•Never dispose of any types of batteries in fire or near excessi ve heat or direct sunlight. Overheated batteries can ruptur eor exploed.

•If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.

•Alkaline batteries & lithium button cell batteries : You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.)

Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead ”. Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, in sulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.

•Lead-acid batteries : Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)

General Note on the Declaration of Conformity : We hereby declare that this device is in accordance	inMusic GmbH
with the essential requirements of the European Directive 2014/53/EU or 2014/30/EU (LVD: 2014/35/EU;	Harkortstr. 12 - 32
GPSD: 2001/95/EC). The full EU declaration of conformity can be requested at the address shown here or	40880 Ratingen
at ionaudio.com/safety	GERMANY
7

+ 17 hidden pages