ION Audio ISP113S User Manual

Quickstart Guide English ( 2 – 10 )

Guía de inicio rápido Español ( 11 – 19 )

Guide d’utilisation rapide Français ( 20 – 29 )

Appendix English ( 30 )

Quickstart Guide (English)

Introduction

Thank you for purchasing the Street Rocker Mini. At ION, your entertainment is as important to us as

it is to you. That’s why we design our products with one thing in mind—to make your life more fun

and more convenient.

Box Contents

Street Rocker Mini

Power Cable

Quickstart Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Setup

Items not listed under Introduction > Box Contents are sold separately.

SD card

USB

Flash Drive

Features

Front Panel

1. Cassette Holder: Press the Stop/Eject button to open the cassette deck and insert a tape

here.

2. Internal Mic: Use this microphone to record external audio sources such as speech, live music,

nature sounds, beatboxing, etc. to USB, SD, and cassette.

3. Speakers: List en to your audio source here.

Note: When headphones are connected to the Headphone Output, the internal speakers will

be muted.

4. Radio Channel Display: View the selected radio station here.

5. Tuning Dial: Adjust this dial to tune in to a radio station.

Side Panel

1. Headphone Output: Connect your headphones to this 1/8” (3.5 mm)

output. When using headphones, the internal speakers will be muted.

Note: When headphones are connected to the Headphone Output, the

internal speakers will be muted.

2. 2-Prong IEC Power Input: Connect the included power cable here.

Top Panel

1. Antenna: Adjust the antenna to get the best radio station reception.

2. Volume: Adjust this to control the overall playback volume.

3. Tone: Turn this knob to left of the center position to increase the bass frequencies. Turn this

knob to right of the center position to increase the high frequencies.

4. Pause: In Tape mode, press this button to pause the tape playback.

5. Stop/Eject: In Tape mode, press this button to stop or eject a tape.

6. Fast Forward: In Tape mode, press this button to fast forward the tape.

Note: The cassette mechanism will not auto-stop when fast forwarding. Press the Stop button

after fast forwarding is completed.

7. Rewind: In Tape mode, press this button to rewind the tape.

Note: The cassette mechanism will not auto-stop when rewinding. Press the Stop button after

rewinding is completed.

8. Play: In Tape mode, press this button to play the tape.

Note: There will be a delay in playback for a few seconds after the Play button is pressed.

9. Record: In Tape mode, press the Record button to record to a tape.

10. Mode: Adjust this switch to change the mode from Tape, Radio, and BT (Bluetooth)/USB/SD.

11. Band: Adjust this switch to select AM, FM, SW1, or SW2.

12. USB Port: Connect your USB flash drive here to play music or record the audio from a tape,

radio, or the internal microphone.

13. SD Card Slot: Insert your SD card here to play music or record audio from a tape, radio, or the

internal microphone.

14. LED: The LED will illuminate solid blue when an SD card or USB flash drive is connected. The

LED will flash blue when USB media is playing. The LED will be lit solid blue during Bluetooth

playback.

15. Previous Track: Press this button to go to the previous track.

16. Record/Play/Pause: Press this button to play/pause a USB or SD card track. Press and hold

this button to record the radio, tape, or internal mic source to a USB flash drive or SD card.

17. Next Track/Delete Track: Press this button to go to the next track. Press and hold the Next

Track button to delete the current USB or SD track.

4 5

7 8

Rear Panel

1. Battery Compartment: Insert 4 new “D” size alkaline

batteries (not included) to power the unit when not

using AC power.

Operation

Recording

Note: Most cassettes feature a protective plastic strip which,

when removed, will not allow any recording to be made to the

cassette. When the plastic strip has been removed, the Street

Rocker Mini’s Record button will not function when

attempting to record to the cassette. To record to a cassette

which no longer has a plastic strip, use adhesive tape to

cover the strip opening.

Recording from the Radio to Tape:

1. Press Stop/Eject to open the cassette holder.

2. Insert a blank tape and close the cassette holder.

3. Set the Function switch to Radio.

4. Set the Band switch to desired frequency band (AM, FM, SW1, or SW2).

5. Adjust the Tune dial to select a radio station.

6. Extend and adjust the antenna for best reception.

7. Press the Record button to start recording.

8. To stop recording, press Stop/Eject button.

Recording from the Internal Microphone to Tape:

1. Press Stop/Eject to open the cassette holder.

2. Insert a blank tape and close the cassette holder.

3. Set the Function switch to Tape.

4. Press the Record button to start recording.

5. To stop recording, press Stop/Eject button.

Recording from Bluetooth to Tape:

1. Set the Function switch to BT/USB/SD.

2. Turn on your Bluetooth device. See the section Pairing a Bluetooth Device for setup details.

3. Play your Bluetooth track.

4. Press the cassette Record button to record to tape.

Recording from the Internal Microphone to a USB Flash Drive or SD Card:

1. Insert a USB flash drive or SD card into the unit.

2. Set the Function switch to USB.

3. Press and hold the Record/Play/Pause button to start recording and speak into the internal

microphone.

4. Press and hold the Record/Play/Pause button to stop recording. The recorded audio will then

playback automatically.

Recording from the Radio to a USB Flash Drive or SD Card:

1. Insert the USB flash drive into the USB port or insert an SD card into the SD card slot.

Note: Only use either a USB flash drive or an SD card at a time, but not both when recording.

The unit may not record properly if both a USB and an SD card is plugged in at the same time.

2. Set the Function switch to Radio.

3. Set the Band switch to desired frequency band (AM, FM, SW1, or SW2).

4. Adjust the Tune dial to select a radio station.

5. Extend and adjust the antenna for best reception.

6. To start recording, press and hold the Record/Play/Pause button.

7. To stop recording, press and hold the Record/Play/Pause button.

Recording from Tape to a USB Flash Drive or SD Card:

1. Press the Stop/Eject button to open the cassette holder.

2. Insert a tape and close the cassette holder.

3. Insert the USB flash drive into the USB port or insert an SD card into the SD card slot.

Note: Only use either a USB flash drive or an SD card at a time, but not both when recording.

The unit may not record properly if both a USB and an SD card is plugged in at the same time.

4. Set the Function switch to Tape and press Play to playback the tape.

5. To start recording, press and hold the Record/Play/Pause button. The LED will flash blue.

6. To stop recording, press and hold the Record/Play/Pause button.

Playback

Playing a Tape:

1. Press the Stop/Eject button to open the cassette holder.

2. Insert a tape and close the cassette holder.

3. Press the Play button to play the tape.

IMPORTANT! After extensive usage, tape heads can acquire oxide build-up, especially if the

cassettes are old. To ensure best performance, use a tape head cleaner periodically.

USB Flash Drive Playback:

Note: If both a USB flash drive and SD card are inserted, the unit will default to using the USB flash

drive.

Note: In USB mode, files are played in alphabetical order from what is on the root level, then

alphabetical by folder, and then alphabetical by track name.

1. Connect the USB flash drive to the USB port.

2. Set the Function switch to USB.

3. To skip a track, press and release the Next Track button.

4. To fast forward a track, press and hold the Next Track button.

5. To go to the previous track, press and release the Previous Track button.

6. To rewind a track, press and hold the Previous Track button.

SD Card Playback:

Note: If both a USB flash drive and SD card are inserted, the unit will default to using the USB flash

drive.

Note: In SD mode, files are played in alphabetical order from what is on the root level, then

alphabetical by folder, and then alphabetical by track name.

1. Insert the SD card into the SD card slot.

2. Set the Function switch to USB.

3. To skip a track, press and release the Next Track button.

4. To fast forward a track, press and hold the Next Track button.

5. To go to the previous track, press and release the Previous Track button.

6. To rewind a track, press and hold the Previous Track button.

Listening to the Radio:

1. Set the Function switch to Radio.

2. Select the desired frequency band (AM, FM, SW1, or SW2).

3. Select the desired radio station by turning the Tuning dial.

4. Extend and adjust the antenna for best reception.

5. Adjust the volume to the desired level.

Radio Reception:

For best radio reception and to avoid interference, follow these tips:

• Move Street Rocker Mini away from sources that can cause radio frequency interference, such

as laptop power supplies, flat screen TVs, electric blankets, external hard drives, light dimmers,

walls, and windows.

• Try listening to the radio at a park or other open outdoor space, away from tall buildings.

• Power Street Rocker Mini with quality, new alkaline batteries instead of a power cable.

• For shortwave radio, in general, lower frequencies (SW1 set below 9 MHz) are better received at

night and for a few hours surrounding dawn and dusk, and higher frequencies (SW2 at 13 MHz

and up) are better received during the day.

Cassette Care

To avoid tape jamming, tape tangling, or playback issues, please follow these tips:

• Check that there are no loose layers of tape visible through the cassette center window. If there

are, manually wind up loose tape using a pencil or hexagonal barrelled ballpoint pen.

Note: If the cassette feels tight when manually winding, the tape may be jamming from ridges

formed in the winding of the tape (visible through the center window). These may be removed, in

most cases, by fast forwarding the cassette to the end, and then rewinding it to the beginning.

• When recording, use new high-quality, brand name tapes.

• Do not expose cassettes to direct sunlight, fluorescent lights, dust, or oils.

• Do not touch the surface of the tape.

• Before storing tapes, rewind or fast forward them to the end of a side.

• Store tapes in a dry, temperate environment.

Tape Head Cleaning

For continued high performance from Street Rocker Mini, periodically clean the head, pinch roller,

and capstan every 10-20 hours of operation.

To clean the tape deck:

1. Power off Street Rocker Mini.

2. Press the Stop/Eject button to open the cassette holder.

3. Remove any tape in the deck.

4. Moisten a new cotton swab with isopropyl alcohol (70-80%).

5. Carefully rub the face of each head, pinch roller, and capstan with the moistened cotton swab.

6. Let the cassette holder dry for 5-10 minutes before putting a tape back in it.

Pairing a Bluetooth Device

1. Adjust the Function switch on Street Rocker Mini to the BT/USB/SD position.

Note: If an SD card and/or a USB flash drive is inserted, remove these in order to pair to a

Bluetooth device.

2. Turn on your Bluetooth device.

3. Navigate to your Bluetooth device’s setup screen, find Street Rocker Mini and connect. A

voice prompt will be heard saying “Bluetooth pairing” when pairing and “Bluetooth connected”

when connected to your Bluetooth device.

Note: If your Bluetooth device prompts for a pairing code, enter “0000”.

4. Press and hold the Play/Pause button to disconnect from a paired Bluetooth device. A voice

prompt will be heard saying “Bluetooth disconnected” when disconnected from the Bluetooth

device.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce

the overall volume of Street Rocker Mini using the Volume knob.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the

bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is poor AM reception: When you have a Bluetooth device that is connected, disconnect

your Bluetooth device in order to listen to AM radio. To adjust AM reception, move the entire unit.

If you cannot connect your audio device to Street Rocker Mini via Bluetooth:

• Have your audio device (e.g., smartphone or tablet) and Street Rocker Mini as close together as

possible while trying to connect. Make sure both the audio device and Street Rocker Mini are

unobstructed by walls, furniture, etc.

• Reset the Bluetooth connection on Street Rocker Mini to disconnect Street Rocker Mini from

any other audio device and restart the search process. If this does not work right away, power

off Street Rocker Mini and then power it back on. See Pairing a Bluetooth Device for more

information.

• Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You

can find this under the Bluetooth menu in the Settings for your phone or other audio device.

If this does not work, and you have connected to Street Rocker Mini before, find Street Rocker

Mini in the list of available or previously connected devices in your audio device's Bluetooth

menu, tap the "gear" or “i” icon located next to it and then select Unpair or Forget. Turn Street

Rocker Mini off and back on and try pairing again once it reappears in your available devices

list.

Note: If Street Rocker Mini has been paired to another audio device recently that is still within

range, you may need to repeat this process with that audio device to fully disconnect.

+ 22 hidden pages