ION Audio ISP106 User Manual

Quickstart Guide English ( 3 – 8 )

Guía de inicio rápido Español ( 9 – 14 )

Appendix English ( 15 )

Quickstart Guide (English)

Introduction

Thank you for purchasing the Wave Rider. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.

1. Make sure all items listed in the Box Contents are included in the box.

2. READ THE SAFETY & WARRANTY MANUAL BEFORE USING THE PRODUCT.

3. MAKE SURE THE BATTERY IS COMPLETELY CHARGED PRIOR TO FIRST USE FOR

MAXIMUM BATTERY LIFE.

Box Contents

Wave Rider

Micro-USB Cable

1/8" (3.5 mm) Stereo Aux Cable

Quickstart Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Features

1. Volume Down (-): Press this to

decrease the speaker volume on Wave Rider.

2. Volume Up (+): Press this to

increase the speaker volume on Wave Rider.

3. Previous (<): Press and release

this button to go to the previous FM radio station or to skip to the previous Bluetooth track. Press and hold this button to seek backwards for a clear FM radio station.

4. Next (>): Press and release this button to go to the next FM radio station or to skip to the

next Bluetooth track. Press and hold this button to seek forward for a clear FM radio station.

Note: With some apps, pressing the Previous or Next button may go to another playlist or music genre.

5. FM Mode: Press this button to enter FM mode. Hold the button for 3 seconds to enter FM Preset Creation mode.

6. Bluetooth/FM LED: This blinks blue when Bluetooth pairing or illuminates solid blue when connected to a Bluetooth device. When in FM mode, this LED is solid green and blinks slowly when in FM Preset Creation mode.

7. Bluetooth Button: Press this button briefly to begin Bluetooth connecting. Press and hold this button to disconnect a paired Bluetooth device.

Press the Bluetooth button twice to enable or disable voice prompts.

8. Charging Indicator: The LED will slowly blink when the battery needs to be charged. The LED is solid red when the battery is charging. When the power is on and the battery is fully charged, the red LED will turn off.

9. Power On/Off: Press and hold this button to turn Wave Rider on/off. While Wave Rider is connected to a power source, it does not need to be powered on to charge the battery.

Note: Wave Rider will power off after 30 minutes if there is a Bluetooth connection with no audio playing. It will never automatically power off when in FM mode unless the battery has no charge.

10. Play/Pause / Call Receive/End: In Bluetooth mode, press this button to play or pause a track from a connected Bluetooth device. In FM mode, press this button to select a previously saved preset station.

When Bluetooth-paired, press and release this button to answer a phone call. The phone’s ringtone will be heard through Wave Rider’s speaker until the call is answered. When the call has been disconnected, Wave Rider will resume playing music. To reject an incoming call, press and hold this button.

Press and hold this button for 2 seconds to enable your connected smartphone's voice assistant (e.g. Siri®, Google®, etc), and then speak into the microphone.

Note: If the front speaker grill fills with water, the sound will be muffled until the water has drained.

768 9

10 11

11. Light Mode: Press this button to cycle through the available light modes:

• Color Cycle: The lights slowly glow and cycle through colors. Press and hold the

light mode button to freeze the lights on one color.

• Red/White/Blue: The lights all glow red for one second, followed by white then blue.

• Beat Sync: The lights react to the beat of the music.

• Off: The lights turn off. This is the default mode

when Wave Rider is first powered on.

12. Micro USB Port*: Use the included micro-USB cable to connect this port to a computer or power adapter (DC 5 V; sold separately) to charge Wave Rider.

13. Auxiliary Input*: This stereo 3.5 mm (1/8”) input can be used to connect a CD player, MP3 player, or other audio source.

*IMPORTANT:

• Cover the Aux In and the micro-USB port with the cap in the locked position when using Wave Rider in water.

• Make sure Wave Rider and its connections are dry before charging. Never charge when wet.

Operation

Pairing or Disconnecting a Bluetooth Device

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

To pair a Bluetooth device:

1. Turn on your Bluetooth device.

2. Power on Wave Rider and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is slowly flashing.

3. Navigate to your Bluetooth device’s setup screen, find Wave Rider and connect.

Note: If your Bluetooth device prompts for a pairing code, enter 0000.

To disconnect a Bluetooth device:

1. Press and release the Bluetooth button to disconnect a paired Bluetooth device.

2. To connect to another Bluetooth device, repeat step 3 above.

+ 11 hidden pages