ION Audio IPA79S User Manual

Quickstart Guide English ( 2 – 6 )

Appendix English ( 7 )

Quickstart Guide (English)

Introduction

Box Contents

Explorer Outback

Microphone and Cable with Storage Bag

1/8” (3.5 mm) Stereo Aux Cable

Power Cable

Quickstart Guide

Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit ionaudio.com.

Rechargeable Batteries

Rechargeable lead-acid batteries are the same type used in automobiles. As with your car
battery, how you use this battery has a significant impact on its lifespan. With proper use and
treatment, a lead-acid battery can last for years. Here are some recommendations for getting
the longest life from the internal battery.

General Usage

Storage

Repair

Disposal

Fully charge the battery before using it.

Charge the battery completely after each use.

For best product longevity, do not store at exceedingly hot (greater than
90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.

It is acceptable to leave your sound system plugged in. This will not
overcharge the battery.

If you leave the battery level low and do not charge it for 6 months, it may
permanently lose capacity.

If the battery fails to charge, check your fuse near the power cable input. If
your fuse is intact and it still will not charge, contact ION Audio at

ionaudio.com.

Bring the unit to a recycling center or dispose of in accordance with local
ordinances.

2

Outdoor Use and Care

Though Explorer Outback is water-resistant and able to tolerate splashing water, please
review the tips below to get the best performance from Explorer Outback:

• Explorer Outback must only be used outdoors with power outlets or extension cords that
are rated for outdoor use.

• Bring Explorer Outback indoors during extreme weather.

• Please do not place Explorer Outback in standing water.

• Please do not connect the power cable to Explorer Outback in a wet environment. Make

sure the power input, power cable, and power outlet are all completely dry before making
any connections.

• Make sure the connection between the prongs of the power cable and the power outlet is
secure and sealed according to your power outlet’s specifications.

• The power input is water-resistant when the power cable is connected with the port door
open. Do not leave the port door open in a wet environment without the cable connected,
as water can enter the input. You can also leave the port door fully closed to prevent water
from entering.

• WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry
place where they will not be affected by water and cause a risk of electric shock. Do not
place devices in the included storage bag, as it is not water-resistant.

Quick Setup

1. Make sure all items listed in the Box Contents are included in the box.

2. Read the Safety & Warranty Manual before using the product.

3. Make sure the battery is completely charged prior to first use for maximum battery life.

4. Study the Connection Diagram.

5. Ensure the Master Volume on Explorer Outback is at zero.

6. Connect your devices.

7. Raise the volume to a comfortable level.

8. Return the Master Volume to zero when you are finished using Explorer Outback.

Connection Diagram

Items not listed under Introduction > Box Contents are sold separately.

Microphone

Bluetooth
Device

Power

Tablet,
etc.

Front Panel Rear Panel

3