ION Audio ICD06 User Manual

备注

ION

周霞

此物料刀模同前料号：

印刷颜色同：

20170707

ICD06

说明书

ICD06

尺寸/套装数

材质/厚度

盒型/页码/条码

爆破/边压

印刷/表面处理

工艺/单双泊/AB同版

公差/用量

200*100mm(展开尺寸) 100*100mm(成型尺寸)

80g书写纸

26页

单黑正反两面印刷

装订

正负公差≥0.01mm 用量1

Quickstart Guide English ( 3 – 10 )

Guía de inicio rápido Español ( 11 – 18 )

Guide d’utilisation rapide Français ( 19 – 27 )

Guida rapida Italiano ( 28 – 34 )

Schnellstart-Anleitung Deutsch (35– 41 )

Snelstartgids Nederlands ( 42 – 49 )

Appendix English ( 50 )

Quickstart Guide (English)

Introduction

Box Contents

Air CD Quickstart Guide USB to Barrel Connector

Safety Information

• Not for use in rain or wet locations. Use only in dry locations.

• Play Air CD on a level surface.

• Close Air CD’s cover when not playing CDs.

Support

For complete warranty information, visit ionaudio.com/warranty. For the latest information about this product (documentation, technical

specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Setup

Items not listed under Introduction > Box Contents are sold separately.

Computer

(sold

Power

Bluetooth

Headphones

(sold

separately)

Wired

Headphones

(sold

separately)

Bluetooth

Speaker

(sold separately)

Features

Top Panel

1. Skip/Search: Press and release |<< or >>| to skip a playing track. Press and hold |<< or >>| to rewind or fast forward through a playing track.

2. Repeat/Bluetooth: Press and hold this button for 2 seconds to enter Bluetooth pairing mode to pair to Bluetooth speakers or headphones. To disconnect Bluetooth pairing, press and hold this button for 2 seconds. When in CD mode, press this button to cycle through the Repeat options:

• Repeat One: Plays the selected track repeatedly.

• Repeat All: Plays through all the CD tracks and then continuously

repeats through all the tracks.

• Intro: Plays through the first 10 seconds of each CD track.

• Random: Plays through all of the tracks in a random order. Playback

3. Program: Set the playback order for up to 30 tracks. When a disc is stopped, press the Prog button, select the desired track to be played using the |<< or >>| buttons, and press Prog to add the track to the playback order. Repeat this process to add more tracks. Once all tracks have been programmed, press Play/Pause to start playback.

4. Play/Pause: Press this button to power on Air CD. Press this button to play a stopped disc or pause a playing disc.

will stop once all tracks have been played.

5. Display: This screen shows the playing track number, total number of tracks,

6. Stop: Press to stop a playing disc. To power off the unit, press and release the Stop

7. Volume -/+: Press these buttons to adjust the playback volume.

8. Eject: Press this button to open the CD compartment.

9. Phones: Connect headphones here to listen to a CD.

10. Power Input: Connect the included USB to barrel connector here. Connect this to a

Bottom Panel

1. Battery Compartment: Insert 2 AA batteries here to

playback time, Bluetooth pairing, anti-skip buffer*, and Repeat options. Note*: The anti-skip buffer ( ) will give approximately 60 seconds of buffer memory protection against interruptions of sound due to vibration. If the unit receives continuous vibration for longer than the buffer memory, some interruption of sound will occur. The sound will resume once the player has stabilized from the vibration and the buffer refills. When the buffer icon is moving, this indicates that the buffer is being created; when stopped it means the buffer has been created for 60 seconds anti-skip.

button when the disc is stopped.

computer USB port, USB/AC power brick (sold separately), or car USB charging port.

power the unit if not using USB to barrel connector.

Playing a CD

1. Open the CD compartment lid by pressing the Eject button, insert a CD, and close the compartment lid.

2. Connect headphones to the Phones output.

3. Press and hold the Play/Pause button for 2 seconds to power on Air CD.

4. Select a CD track using the |<< or >>| buttons.

5. Press Play/Pause to start CD playback.

6. Adjust the playback Volume -/+ buttons as needed.

7. To search backward or forward through a track, press and hold the |<< or >>| buttons.

Pairing Air CD to a Bluetooth Speaker

Air CD has a Bluetooth transmitter to send audio to a Bluetooth speaker (or Bluetooth headphones) wirelessly.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.

2. Press and release Play/Pause to power on Air CD.

3. Press and hold the Bluetooth button on Air CD to start pairing to your Bluetooth device. “BT” will be seen flashing on the Air CD display when it is in pairing mode. The pairing process could take up to 30 seconds. For best results, move the Air CD and Bluetooth speaker close together.

4. When the Bluetooth connection is made, the BT icon on the Air CD’s display should stop flashing, and be solid. Your Bluetooth speaker should indicate when the connection has been made as well.Your Bluetooth speaker should indicate when the connection has been made. Note: Air CD will connect to the closest Bluetooth speaker that is near it.

5. Play music on Air CD. If you are connected to a Bluetooth speaker with a play/pause button and do not hear audio, try pressing the play/pause button.

6. Adjust the volume on your Bluetooth speaker (if applicable) or use the Volume -/+ buttons on Air CD to control the output level.

7. To disconnect pairing, press and release the Bluetooth button on Air CD or turn off Bluetooth pairing on your Bluetooth speaker.

8. Press the Stop button to stop playback. To power off Air CD, press and release the Stop button after playback is stopped.

Troubleshooting

The unit will not turn on.

• Check that the batteries are inserted correctly.

• Replace with fresh batteries.

• Ensure the USB to barrel connector is connected properly.

The CD will not playback properly.

• Ensure the CD compartment is closed and press the Stop button before

playing the CD.

• Reinsert the disc, make sure the disc is clean, or try another disc.

The Bluetooth speaker that I want is not pairing to Air CD.

• Turn off or move other nearby Bluetooth speakers more than 50’ (15.2 m) away so only the closest Bluetooth speaker you want will pair.

I am connected to a Bluetooth speaker but do not hear any audio.

• If you are connected to a Bluetooth speaker with a play/pause button, and do not hear audio, try pressing it’s play/pause button.

• Press and release Air CD’s Bluetooth button to disconnect it from the Bluetooth speaker; then press and release the Bluetooth button once more to try pairing again.

• Turn Air CD off and then on again, then press and hold its Bluetooth button to try pairing it again.

• Use the Volume +/- buttons on Air CD to turn up the output level.

Read and keep these instructions. Heed all warnings and follow all Instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus. Only use attachment/accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Power Sources: This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposes to excessive heat such as sunshine, fire, etc. This apparatus is for professional use only. Intended operational climate: tropical, moderate. Warning: Excessive sound pressure (high volumes) from headphones can cause hearing loss. Warning: Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product. INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING LASER PRODUCTS: DANGER: CAUTION – CLASS 1 LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH TELESCOPES. INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

For best audio quality, avoid using this device in a high RF-radiated environment. In an environment with radio frequency interference, the unit may malfunction and resume normal operation after removal of the interference.

Correct Disposal of This Product: This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. General Note on the Declaration of Conformity: We hereby declare that this device is in accordance with the essential requirements of the European Directive 2014/53/EU. The full EU declaration of conformity can be requested at the following address: inMusic GmbH Harkortstr. 12 - 32 40880 Ratingen GERMANY

Guía de inicio rápido (Español)

Introducción

Contenido de la caja

Air CD Guía de inicio rápido Adaptador de USB a conector cilíndrico

Información sobre la seguridad

No lo utilice bajo la lluvia o en lugares húmedos. Utilícelo sólo en lugares secos.

•

• Reproduzca el Air CD solo en una superficie nivelada.

• Cierre la tapa del Air CD cuando no esté reproduciendo ningún CD.

Soporte

Para información completa sobre la garantía, visite ionaudio.com/warranty.

Para obtener la información más reciente acerca de este producto (documentación, especificaciones técnicas, requisitos de sistema, información de compatibilidad, etc.) y registrarlo, visite ionaudio.com.

Para soporte adicional del producto, visite ionaudio.com/support.

Instalación

Los elementos que no se enumeran en Introducción > Contenido de la caja se venden por separado.

Suministro

eléctrico

Auriculares

Bluetooth

(se venden

por

separado)

Ordenador

(se vende

por

separado)

Auriculares

con cable

(se venden

por

separado)

Altavoz

Bluetooth

(se vende por

separado)

Características

Panel superior

1. Saltar/Buscar: Pulse y suelte |<< o >>| para omitir la reproducción de una pista. Mantenga pulsados |<< o >>| para rebobinar o avanzar

rápidamente por una pista que se esté reproduciendo.

2. Repetir/Bluetooth: Mantenga pulsado este botón durante 2 segundos para entrar al modo de apareamiento Bluetooth a fin de aparear los altavoces o auriculares Bluetooth. Para desconectar el apareamiento Bluetooth, mantenga pulsado este botón durante 2 segundos. Estando en modo de CD, pulse este botón para alternar las opciones de repetición:

• Repetir una: Repite la pista seleccionada.

• Repetir todas: Reproduce todas las pistas del CD y luego las repite.

• Intro: Repite los primeros 10 segundos de cada pista del CD.

• Aleatorio: Reproduce todas las pistas en orden aleatorio. La

reproducción se detendrá una vez que se hayan reproducido todas las

3. Programa: Ajuste el orden de reproducción para un máximo de 30 pistas.

pistas.

Cuando se detiene un disco, pulse el botón Prog, seleccione la pista deseada a reproducir utilizando los botones |<< o >>| y pulse Prog para añadir la pista al orden de reproducción. Repita este proceso para agregar más pistas. Una vez programadas todas las pistas, pulse Play/Pause para iniciar la reproducción.

4. Reproducir/Pausa: Pulse este botón para encender el Air CD. Pues este

5. Pantalla: Esta pantalla muestra el número de la pista que se está

6. Parar: Pulse este botón para detener la reproducción de un disco. Para pagar

7. Volumen -/+: Pulse estos botones para ajustar el volumen de reproducción.

8. Expulsar: Pulse este botón para abrir el compartimiento de CD.

9. Auriculares: Conecte aquí los auriculares para escuchar un CD.

10. Entrada de corriente: Conecte aquí el adaptador de USB a conector cilíndrico

botón para reproducir un disco detenido o poner en pausa un disco que se está reproduciendo.

reproduciendo, la cantidad total de pistas, el tiempo de reproducción, el apareamiento Bluetooth, el búfer anti-vibraciones* y las opciones de repetición. Nota*: El búfer anti-vibraciones ( ) le brinda aproximadamente 60 segundos de protección mediante gracias a un búfer de memoria contra interrupciones en el sonido debidas a las vibraciones. Si la unidad recibe vibraciones de forma continua durante un período mayor al del búfer de memoria, podrían percibirse interrupciones en el sonido. El sonido se reanudará una vez que el reproductor se haya estabilizado tras la vibración y el búfer se vuelva a llenar. Cuando el icono del búfer se está moviendo, esto indica que el búfer está siendo creado; cuando se detiene, indica que se ha creado el búfer antivibraciones de 60 segundos.

la unidad, pulse y suelte el botón Stop cuando el disco esté detenido.

incluido. Conecte esta entrada a un puerto USB de un ordenador, fuente de energía USB/AC externa (se vende por separado), o puerto de carga USB de automóvil.

Panel inferior

1. Compartimiento para pilas: Inserte aquí dos pilas AA para alimentar la unidad si no está utilizando el adaptador de USB a conector cilíndrico.

Reproducción de un CD

1. Abra la tapa del compartimiento de CD pulsando el botón Eject, inserte un CD y ciérrela.

2. Conecte los auriculares a la salida Phones (auriculares).

3. Mantenga pulsado el botón Play/Pause durante 2 segundos para encender el Air CD.

4. Seleccione una pista del CD usando los botones |<< o >>|

5. Pulse Play/Pause para iniciar la reproducción del CD.

6. Ajuste los botones Volume -/+ para la reproducción según sea necesario.

7. Para buscar hacia atrás o hacia delante por una pista, mantenga pulsados los botones |<< o >>|

+ 37 hidden pages