Page 1
Page 2
DMX LED 4PAR 24*Tri-9w manual
Our DMX LED 4PAR system offers many possibilities to achieve the effects which you want. It is pack-and-go
for DJs, bands, nightclubs and other performers who want a complete LED wash light system. This system
includes PAR-BAR, a four-pedal foot switch, adjustable tripod, packing bag and transport case. Please read the
manual before operation.
A. SPECIFICATION:
1. Weight:9kg
2. Size: 845*305*68mm
3. Power input: AC100-240V/50-60HZ
4. Wattage: 200W
5. LEDS: 24*tri-9W
6. Beam angle: 45 degree
7. 3 pin female XLR socket and 3 pin male XLR socket
8. RGB control of 4 separate lights
9. Independent positioning of each light
10. four-pedal foot switch: auto run, sound active, freeze, blackout
11. Working place: indoor, temperature: -20 °C~+ 40° C
12． LED display for easier operation.
13. Selectable built-in programs, Auto running, DMX mode, M/S, sound-active mode.
14. 7selectable DMX modes: 2，3, 4, 7,8 ，14, 15 DMX channels mode.
B.OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running
mode, DMX mode, Slave mode, sound-activited mode.
“SETUP” is to set the relative specification for current mode.
“UP” is to add the value of current specification.
“DOWN” is to decrease the value of current specification.
Built-in programs-- running one of 14 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound active mode-- running by sound - activated
four-pedal foot switch: auto run, sound active, freeze, blackout
1. built-in programs mode
Press mode until it shows Prxx, you can select 14 different built-in Programs. press“SETUP”and “UP”
“DOWN” buttons to select the programs (from Pr01 to Pr14) and select the desired program values. When
Page 3
CH1
CH2
CH3
R
G
B
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
CH1
CH2
CH3
CH4
it shows Pr01, press “SETUP” to choose the seven static color.
When it is Pr02 to Pr14, press “SETUP” and “UP” “DOWN” buttons, you can set the values for
flash(Fs00-Fs99), fading time(Fd00-Fd99), running speed(SP00-SP99).
When it is Pr13 and Pr14, you can set the background color and running color for this effect, switch it
from 1- -r (background color)to 2- -r(running color) by “SETUP”, adjust different colors by “UP”
“DOWN”.
2. Auto run mode
You can press “MODE”button to select auto run mode, it shows , then it will run the built-in
programs automatically.
Press “SETUP”, it shows n. 001, then you can adjust the running loops number by “UP” “DOWN”
3. DMX mode
You can control the devices individually via your DMX-controller. Press “MODE”button until it shows
, this means DMX address is 001, you can set the DMX address by “UP”and“DOWN”buttons.
If press “SETUP” button, it will show d-p1 , it means the device is in which DMX mode 1. You can
switch these DMX modes by “UP”and“DOWN” buttons. There are 7 DMX modes.
DMX value as follows:
DMX mode1：d-P1
DMX mode2：d-P2
Page 4
R G B
Master
dimmer
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
R G B R G B flash
Master
dimmer
0—255
Light
(0 =
OFF)
0—255
Light
(0 =
OFF)
0—255
Light
(0 =
OFF)
0—255
Light
(0 =
OFF)
0—255
Light
(0 =
OFF)
0—255
Light
(0 =
OFF)
0—255
Flash
(0 =
OFF)
0—255
Light
(0 =
OFF)
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH1
0
CH11 CH1
2
CH13
CH14
R G B R G B R G B R G B flash
Master
dimme
r
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OF
F
0-255
Light
0=OFF
0—255
Flash
0 = OFF
0-255
Light
0=OFF
CH1
CH2
DMX mode3：d-P3
DMX mode4：d-P4
DMX mode5：d-P5
Page 5
NO. DMX
value
FUNCTION
SPEED
1
0--9
OFF
Value=0 OFF
2
10--19
red
SPEED
0—255
3
20--29
yellow
4
30--39
green
5
40--49
cyan
6
50--59
blue
7
60--69
purple
8
70--79
white
9
80--89
PROGRAM01
10
90--99
PROGRAM02
11
100--10
9
PROGRAM03
12
110--11
9
PROGRAM04
13
120--12
9
PROGRAM05
14
130--13
9
PROGRAM06
15
140—14
9
PROGRAM07
16
150--15
9
PROGRAM08
Page 6
17
160--16
9
PROGRAM09
18
170--17
9
PROGRAM10
19
180--18
9
PROGRAM11
20
190--19
9
PROGRAM12
21
200--20
9
PROGRAM13
22
210--21
9
PROGRAM14
23
220--22
9
PROGRAM15
24
230--23
9
PROGRAM16
25
240--25
5
Sound Mode
Sensitivity
0--255
CHANNEL
VALUE
FUNCTION
1
000 009
010 249
250 255
Control/Operating Mode
RGB Mode (ch.2-15)
Auto Programms
Sound activated
DMX mode6：d-P6
Page 7
2
000 255
Dimmer (low high)
3
000 009
010 255
Strobe
No function
Strobe (slow fast)
4
000 255
Red 1
0% 100%
5
000 255
Green 1
0% 100%
6
000 255
Blue 1
0% 100%
7
000 255
Red 2
0% 100%
8
000 255
Green 2
0% 100%
9
000 255
Blue 2
0% 100%
10
000 255
Red 3
0% 100%
11
000 255
Green 3
0% 100%
12
000 255
Blue 3
0% 100%
13
Red 4 000 255
Page 8
0% 100%
14
000 255
Green 4
0% 100%
15
000 255
Blue 4
0% 100%
DMX mode 7：d-P7
CH1
CH2
CH3
CH4
CH5
CH6
CH7
R G B
NO. DMX
value
FUNCTIO
N
SPEED
FLASH
Master
dimmer
0-25
5
Light
0=O
FF
0-25
5
Light
0=O
FF
0-25
5
Light
0=O
FF
1
0--9
OFF
NO USE
NO USE
0—255
Light
(0 = OFF)
2
10--19
red
SPEED
0—255
FLASH
0—255
3
20--29
yellow
4
30--39
green
5
40--49
cyan
6
50--59
blue
7
60--69
purple
8
70--79
white
9
80--89
PROGRA
M01
10
90--99
PROGRA
M02
11
100--109
PROGRA
M03
12
110--119
PROGRA
Page 9
M04
13
120--129
PROGRA
M05
14
130--139
PROGRA
M06
15
140—14
9
PROGRA
M07
16
150--159
PROGRA
M08
17
160--169
PROGRA
M09
18
170--179
PROGRA
M10
19
180--189
PROGRA
M11
20
190--199
PROGRA
M12
21
200--209
PROGRA
M13
22
210--219
PROGRA
M14
23
220--229
PROGRA
M15
24
230--239
PROGRA
Page 10
M16
25
240--255
Sound
Mode
Sensitivity
0--255
4. Slave mode
Press “MODE” button to select SlAv to run the slave mode.
5. Sound active mode
Press “MODE” button to select SU31 to be run, now if activated one time, it will run one step, adjust the
sensitivity by “UP” and “DOWN” buttons.
Sensitivity: SU01-SU31
6. Static color mode
Press “MODE” button to select Colr to be run, press “SETUP”, it will show r255, then you can adjust the
colors by “UP”and“DOWN”buttons.
7. 4-Pedal foot switch
Connect the foot switch to the BAR, then you can control the effect easily by your foot.
Auto run—running the effects automatically.
Sound active—running the effects by sound activated.
Freeze—freeze the effect which you are running( if you want to run the unit again, please press auto run or
sound active to activate it).
Blackout—the unit will be off.
Page 11
Loading...