
LED strobe panel, 448*SMD5050
LED mode switch inbuilt-in programs, dimming mode,
sound active, DMX mode, slave mode
/enter to setting menu, lightly press to back to the
superior menu( set corresponding LED mode)
Enter the setting menu in this mode
Enter the system menu options
Setting option add 1 / switch ON
Setting options continuous add 1
Setting options reduce 1 / switch OFF
Setting options continuous reduce 1
User Manual
Our LED strobe panel offers many possibilities to achieve the effects which you want. It is suitable for DJs, bands,
nightclubs and other performers who want LED stage light. Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC 100V/260V, 50Hz/60Hz
2. Power consumption: 105W (Max)
3. LED: 448* SMD5050 white LED
4. Color temperature: 6900K
5. Operation mode: LED display
6. Weight: 3.6KGS
7. Size: 36*26.35*9.6 CM
B. OPERATION
There are five modes to choose:
Built-in programs
Dimming mode
Sound active
DMX mode
Slave mode
The button function instruction
1) Press the button lightly: the time of press the button and loosen less than 0.7 second
2) Long press the button: press the button more than 0.7 second
Sheet 1 Button function instruction

Through UP or DOWN set the frequency(1—15Hz )
Through UP or DOWN set the frequency(1—15Hz )
Through UP or DOWN set the auto running speed
(1—15 )
Through UP or DOWN set the brightness of the LED
(0-255 )
LED dimming, through UP or DOWN adjust the brightness value
( 0—255 )
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the LED brightness (0—255)
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the LED brightness (0—255)
1. Built-in Programs Mode
Press the “MODE”, enter built-in programs mode menu, press the “UP” or “DOWN”, select the built-in programs
~ .
Sheet 2 Built-in programs description
Lightly press the “SETUP” to set the built-in program.
Sheet 3 Built-in programs settings
2. Dimming Mode
Press the “MODE”, the LED display will show as below, enter to LED dimming mode
Lightly press the “SETUP”, to set the lamp brightness.
Sheet 4 dimming mode settings
3. Sound-Active Mode
1) There are four sound programs: sound programs 1, sound programs 2, sound programs 3, and sound programs 4.
2) Press the “MODE” select the sound programs, through “UP” or “DOWN” select the built-in sound programs
~
3) Lightly press the “SETUP”, enter to sound programs settings, as below sheet.
Sheet 5 Sound active programs

4. DMX Mode
DMX address setting (1 -512), through UP or DOWN set the address
Through UP or DOWN select CH1, CH4, CH6, CH7 mode
CHANNELS VALUE FUNCTION
1 0-255
CHANNELS VALUE FUNCTION
1 0-255
CHANNELS VALUE FUNCTION
1 0-255
5 0-255 master dimming
0-9 no use
10-255 strobe, the greater the value,the higher the frequency
5 0-255 Master dimming
0-39 No use
40-59 Built-in programs 1
60-79 Built-in programs2
80-99 Built-in programs3
100-159 No use
160-179 Sound active 1
180-199 Sound active 2
200-219 Sound active 3
220-255 Sound active 4
7 0-255 Built-in programs: strobe or speed; sound active:sound active sensitivity
Press the “MODE”, the LED display will show as below, enter to LED DMX mode main interface.
Lightly press the “SETUP”, enter into DMX address, DMX working mode setting.
Sheet 6 DMX mode settings
Working mode 1:
Sheet 7 The DMX mode function sheet of CH3
Working mode 2:
Sheet 8 The DMX mode function sheet of CH6
Working mode 3:
Working mode 4:
Sheet 9 The DMX mode function sheet of CH7

5. Master/slave Mode
Temperature
control
switch
options
Press UP, will show , open temperature control.
Press DOWN, will show , closed temperature.
Press DOWN or UP update temperature ,the current
temperature is 33℃
Press DOWN or UP update the LED newest brightness
(0—255).
Press UP to restore factory settings
Press the “MODE”, the LED display will show as below, enter LED slave mode.
C. System Options
In any state, long press the “SETUP”, enter the main interface of the system options:
Lightly press the “SETUP”, select the temperature protection switch options, PCB temperature inquires, LED
biggest gray, restore factory settings.
Setting details as below sheet:
On system options, lightly press the “MODE”, return to the system main interface , press the “MODE”
again, return before LED mode menu.
D. Restore Factory Settings
There are two kinds of methods to restore factory settings.
1) In menu system options , press the “UP” to restore factory settings.
2) When in power failure situation, press the “MODE” and “SETUP”, power on to restore factory settings.

ООО «ИНВАСК»
Адрес: 143406, Московская область, Красногорск, ул. Ленина, дом 3-Б
Тел. (495) 565-0161 (многоканальный)
Факс (495) 565-0161, доб. 105
http://www.invask.ru e-mail: invask@invask.ru
Сервис-центр «ИНВАСК»
Адрес: 143400, Московская область, Красногорск, Коммунальный квартал,
дом. 20
Тел. (495) 563-8420, (495) 564-5228
e-mail: service@invask.ru