Involight LED SPOT 12T User Manual [ru]

Outdoor DMX LED PAR manual

Our outdoor DMX LED PAR offers many possibilities to achieve the effects which you want. It is
suitable for DJs, bands, nightclubs and other performers who wants LED stage light . Please read the manual

before operation.

A. SPECIFICATION:

1. Weight: 3.5kgs

2. Size: 184*184*170mm

3. Power input: AC110-240V/50-60HZ

4. Wattage: 60W

5. LEDS:12*tri-3W LEDs

6. Beam angle:30 degree

7. IP rate:IP65

8. LED display for easier operation.

9. Selectable built-in programs, Auto running, DMX mode, M/S mode.

10. DMX modes: 3channels, 4channels, 8channels

B.OPERATION:

After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto
running mode, DMX mode, Slave mode.

“SETUP” is to set the relative specification for current mode.

“UP” is to add the value of current specification.

“DOWN” is to decrease the value of current specification.

Built-in programs-- running one of 10 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode.

1. built-in programs mode

--Press “mode” until it shows “Pr.xx”to enter into built-in programs mode.
Press “up”and “down”to select program from Pr.01～Pr.10。

--Press “setup”button to enter into the running speed menu“SP××”.
Press “up”and “down”button to set the speed value from SP01～SP100（FL）.

--Press “setup”button to enter into the strobe menu “FS××”。

Press “up” and “down” to set up strobe value from FS00～99.

CHANNEL

VALUE

FUNCTION

CH1

0-255

Master dimmer

CH2

Red color

dimming

0-255

Red color dimming 0-255

Select all

kinds of

static color

（It is

available
when the

6ch is 0-24）

0-8

R(255)

9-17

R(255) G(50)

18-26

R(255) G(150)

27-35

R(255) G(255)

36-44

R(200) G(255)

45-53

R(100) G(255)

54-62

R(40) G(255)

63-71

G(255)

72-80

G(255) B(50)

81-89

G(255) B(150)

90-98

G(255) B(255)

99-107

G(150) B(255)

It can be set up the brightness from RGB0~255 value when it is being static color program Pr.01

2. Auto run mode

--Press “mode” until it shows “AUTO”to enter into auto running mode

--Press “setup”button to enter into the running speed menu“SP××”.
Press “up”and “down”button to set the speed value from SP01～SP100（FL）.

--Press “setup”button to enter into the strobe menu “FS××”。

Press “up” and “down” to set up strobe value from FS00～99.

--Press “setup”button to enter into the fading menu “Fd××”。

--Press “up” and “down” to set up fading value from Fd00~99

3. DMX mode

--Press “mode” until it shows “d.×××”to enter into DMX mode

--Press “UP”and “DOWN”button to set up the DMX address from d.001～d.512.

--Press “setup”button to enter into the DMX mode menu “d-P×”.
Press “up”and “down”to set up DMX mode from d-P1~ d-P3.

--To set up the device number ID.xx at the situation DMX mode “d-P1”(others mode can not be set up
the device number).

Press “up”and “down”to set up ID value from ID.01—ID.66.

DMX mode 1:d-P1(8 channels)