1
LED UFO 4*Tri-9W
Our DMX LED Triple Moon offers many wonderful effects which are very magic. It is designed for professional
places, such as stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION
1. Power input: 110V-240V, 50Hz/60Hz
2. Wattage: 60W
3. LEDs: 4*tri-9w
4. Control feature: DMX mode, auto running, M/S mode, sound active
5. Weight: 3.79kgs
6. Size: 310*310*180mm
7. DMX Channels: Selectable 4 CH
8. LED display for easier operation
B. OPERATION
This series of product has rich effect programs, easier operation, there are four working modes:
Auto running
DMX mode
Slave mode
Sound active
1. Auto Running
1. Press the “MODE”, enter the auto running mode “AUTO”.
2. Press the “SETUP”, enter the speed menu of the auto running mode “SP××”.
5. Press the “UP” or “DOWN” set up the speed value ~ (SP100).
6. Press the “SETUP”, enter the flash menu of the auto running “FS××”.
7. Press the “UP” or “DOWN” set up the flash value ~ .
2. DMX Mode
1. Press the “MODE”, enter the DMX mode “d×××”.
2. Press the “UP” or “DOWN”, set up the DMX address value ~ .
3. Press the “SETUP”, enter the DMX working mode 4CH.
2
CHANNEL
VALUE
FUNCTION
NOTES
1
(Mode)
000-009
BLACKOUT
010-019
R
020-029
G
030-039
B
040-049
RG
050-059
RB
060-069
GB
070-079
RGB
080-200
AUTOMATIC
201-255
SOUND-ACTIVITY
2
(Strobe)
000-009
NO STROBE
WORKS ONLY WHEN CH 1 IS
BETWEEN 010-200
010-255
STROBE SLOW TO FAST
3
(Speed)
000-009
NO FUNCTION
WORKS ONLY WHEN CH 1 IS
BETWEEN 080-200 (AUTO)
010-255
SLOW TO FAST
4
(Motor)
000-009
NO ROTATION
WORKS ONLY WHEN CH 1 IS
BETWEEN 010-079
010-119
ROTATE LEFT FAST TO SLOW
120-145
STOP
146-255
ROTATE RIGHT SLOW TO FAST
DMX Agreement：
3. Slave Mode
Press the “MODE”, enter the slave mode “SLAV”.
4. Sound Active Mode
Presses the “MODE” enter the sound active mode “SoUn”.
C. TURN ON OR OFF THE LED DISPLAY.
1. Press the “MODE” enters the turn on or off the LED display mode “LED”.
2. Press the “SETUP” enters the LED display turn on or off.
3. Press the “UP” or “DOWN”, set up the LED display stay on or off.
Remarks: when it is on, the LED display will light up all the way. When it is off, the LED display will turn off
after 30 seconds.
D. LED INVERSION DISPLAY
1. Press the “MODE”, enter the mode of the LED inversion display menu “DISP”.
2. Press the “SETUP” to choose the LED standard display “DISP” or inversion display “dSIP”
E. VERSION DISPLAY
1. Press the “MODE” to enter the menu of the version display“Ver”.
2. Press the “SETUP”, it will shows the version No. as V10.
Loading...