Involight LED PANEL7T User Manual [ru]

DMX LED Flood Panel 7*tri-3W Manual

Our DMX LED Flood Panel offers many possibilities to achieve the effects which you want. It is for DJs, bands, nightclubs
and other performers who want a complete LED wash light system. Please read the manual before operation.

A. SPECIFICATION:

1. Size:30×20×6cm

2. Weight: 2.6kg

3. Power input: AC 110V/240V ,60HZ/50HZ

4. Power consumption: 30W

5. LEDS: 7*tri-3W LEDS;

6. Beam angle:40degree(25 degree optional)

7. Built-in programs,DMX mode, M/S, auto run,sound active, static colors

8. Selectable 3, 4, 8DMX channels

9. LED display operation(dip switch optional)

10. Double brackets for floor use

11. No fan cooling,completely silent

12. Very good color mixing and brightness

13. inner box: 31.5×12.5×25.5cm

14. master carton: 65×27×54cm

15. 8 pcs/ctn

B.OPERATION:

After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running mode, DMX
mode, Slave mode, sound-activited mode.

“SETUP” is to set the relative specification for current mode.

“UP” is to add the value of current specification.

“DOWN” is to decrease the value of current specification.

Built-in programs-- running one of 10 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound active mode-- running by sound - activated

1. built-in programs mode

Press mode until it shows “Pr.xx”, you can select 10 different built-in Programs. press“SETUP”and “UP” “DOWN”
buttons to select the programs (from Pr.01 to PR.10) and select the desired program values. When it shows Pr.01, press

“SETUP” to choose the seven static color(1.-r ；2.-rg；3.-g；4.-gb；5.-b；6.-rb；7.rgb).

Press “SETUP” and “UP” “DOWN” buttons,you can select the grayness of static color

Press “SETUP” and “UP” “DOWN” buttons, you can set the values for flash(FS00~FS99),

When it is Pr.02- Pr.10,the first time press “SETUP” and “UP” “DOWN” buttons, you can set the values for speed

from SP01~SP100(FL),the second time press “SETUP” and “UP” “DOWN” buttons, you can set the values for

flash(FS00~FS99).

2. Auto run mode

You can press “MODE”button until it shows “AUTO”

--Press “setup”button to enter into the running speed menu“SP××”.
Press “up”and “down”button to set the speed value from SP01～SP100（FL）.

--Press “setup”button to enter into the flash menu “FS××”。

Press “up” and “down” to set up flash value from FS00～99.

--Press “setup”button to enter into the fading menu “Fd××”.

Press “up” and “down” to set up fading value from Fd00~99.

3. DMX mode

--Press “mode” until it shows “d.×××”to enter into DMX mode

--Press “UP”and “DOWN”button to set up the DMX address from d.001～d.512.

--Press “setup”button to enter into the DMX mode “X-ch”.

--Press “up”and “down”to set up DMX channels “3-ch，4-ch，8-ch”.

--You can setup ID No. “ID.xx”under the position of 8-ch which can unified control or solely control 66pcs

fixtures.

-- Press “up”and “down”to set up ID value from ID.01—ID.66

DMX mode1：3-ch