Involight LED MH90S User Manual [ru]

LEDMH S90

USER MANUAL

. 1 .

TABLE OF CONTENTS

Maintenance---------------------------------------------------- 1

Statement------------------------------------------------------- 1

Attention Item ------------------------------------------------- 2

Product introduction ------------------------------------------ 2

15 Control Channel

------------------------------------------- 3

10 Control Channel ------------------------------------------- 7

That Control Display

Fault conditions

------------------------------------------10

------------------------------------------------14

Maintenance

1. Please keep the light in dryness and avoiding use in wet place.

2. Using intermittently can be extended the life.

3. Attention to clean the fan and lens usually in order to get the ventilating effects and

lighting effects better.

4. Please do not wipe the crust using organic menstruum for avoid to damage the product.

Statement

The product has well capability and intact packing when leave factory. All of the user should

comply with above warning item and manual, any misuse cause of the damages are not

included in our guarantee, and also can not be responsible for any malfunction & problem

owing to ignore the manual.

Please forgive that we will not be notice for technical change.

. 2 .

Attention Item

1. For guarantee the life of product, please don't put it on the wet place and also not
use it in the place over 40 degree.

2. Please don't lay the product on the unfixable or shakable place.

3. Ask for the professional to maintain the product in order to avoid the danger of
get an electric shock.

4. Power supply should not be changed over ±10% while the light is using, it will
be decreased the life of lamp if the power is too high, but it will be influenced the
luminosity if the power is too low.

5. Please look round the manual for ensure the product can be used normally.

Product introduction

Power supply: AC100-240V, 60/50Hz
Power consumption: 200W
Fiting lamp: 120W
DMX-control-channels: 15 or 10
Colour-wheel 1: 7 single filter + White + Rainbow-effect
Gobo-wheel 1: 8 staic gobo (with gobo shake) + open + Rainbow-effect
Gobo-wheel 2: 7 rotating gobo + open + Rainbow-effect
Shuttle: Flash rate: 0-20Hz
Effect wheel: 3-face prism ( controllable rotating speed, adjustable positive &

negative)
Focus: motorized focus
Dimmer: 0~100% mechanic dimmer
Iris： 0~100% mechanic adjustable
Maximum PAN-movement: 540°, self-correcting
Maximum TILT-movement: 270°, self-correcting
8bit / 16bit PAN/TILT movement resolution
Master/Slave ativated by sound at pre-programmed function.

. 3 .

15 Control Channel

Accept DMX512 control channel, detail as follow:

Channel

1 PAN

2 TILT

3 PAN 16bit

4 TILT 16bit

5 X/Y Speed

6 Color

Wheel

DMX-value

0~255

0~255

0~255

0~255

0~255

0~7

8~15

16~23

24~31

32~39

40~47

48~55

56~63

64~66

67~78

79~92

93~107

108~120

121~136

137~152

153~170

171~212

213~255

Feature

540°

270°
PAN spinner

TILT spinner

PAN / TILT controllable speed with decreasing

White

Blue

Yellow

Pink

Green

Red

Light Blue

Orange red

White

From White To Blue

From Blue To Yello w

From Yellow To Pink

From Pink To Green

From Green To Red

From Red To Light Blue

From Light Blue To Orange red

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with inc reasing speed

7 GOBO

Wheel

0~9 10~19 20~29 30~39

40~49 50~59 60~69 70~79

. 4 .

Channel

7 GOBO

Wheel

8 GOBO
Rotation

DMX-value

80~99

100~119

120~139

140~159

160~179

180~199

200~219

220~237

238~255

0~10

11~127

128~191

192~255

Gobo 1 Shake with inc reasing speed

Gobo 2 Shake with inc reasing speed

Gobo 3 Shake with inc reasing speed

Gobo 4 Shake with inc reasing speed

Gobo 5 Shake with inc reasing speed

Gobo 6 Shake with inc reasing speed

Gobo 7 Shake with inc reasing speed

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with inc reasing speed

Stop

Gobo rotate index
Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with increasing speed

Feature

0~9 10~19 20~29 30~39 40~49

9 Static

GOBO
Wheel

50~59 60~69 70~79 90~91

92~107

108~123

124~139

140~155

156~171

172~187

188~203

204~219

220~237

238~255

Static Gobo 1 Shake w ith increasing speed

Static Gobo 2 Shake w ith increasing speed

Static Gobo 3 Shake w ith increasing speed

Static Gobo 4 Shake w ith increasing speed

Static Gobo 5 Shake w ith increasing speed

Static Gobo 6 Shake w ith increasing speed

Static Gobo 7 Shake w ith increasing speed

Static Gobo 8 Shake w ith increasing speed

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with inc reasing speed

80~89

. 5 .

Channel

10 Shutter

11 Dimmer

12 Focus

13 Prism

14

Channel

function

DMX-value

0~7

8~22

23~85

86~100

101~165

166~180

181~245

246~255

0~255

0~255

0~7

8~15

16~127

128~239

240~255

0 ~ 9

1 0 ~ 1 4

1 5 ~ 1 9

2 0 ~ 2 4

2 5 ~ 2 9

3 0 ~ 3 4

3 5 ~ 3 9

4 0 ~ 4 4

4 5 ~ 4 9

5 0 ~ 5 4

5 5 ~ 5 9

6 0 ~ 6 4

6 5 ~ 6 9

7 0 ~ 7 4

7 5 ~ 7 9

8 0 ~ 8 4

8 5 ~ 8 9

Feature

Close
Open

Strobe effect with increasing speed

Open

Pulse strobe

Open

Random Shutter

Open

0~100% m echanic dimme r
Motori zed focus, zoom out to zoom in

White
Stop, static prism effect

Rotation prism effect Positive rainbow

Rotation prism effect Negative rainbow

Stop, static prism effect

Reserved

Blackout while pan/tilt moving

Blackout while wheel movingcolor

Disabled blackout while pan/tilt/ movingcolor wheel

Blackout while wheel movinggobo

Disabled blackout while pan/tilt/ movinggobo wheel

Disabled blackout while / movingcolor wheel gobo wheel

Disabled blackout while / movingpan/tilt/color wheel gobo wheel

Reset pan

Reset tilt

Color Wheel 1 disk reset

Reserved

Gobo disk reset

Reset Gobo rotation
Reset Gobo 2
Reset Focus
Reset Prism

. 6 .

Channel

14

Channel

function

15 Effect

DMX-value

9 0 ~ 9 9

1 0 0 ~ 1 2 9

1 3 0 ~ 1 9 2

1 9 3 ~ 2 5 5

0~9

10~19

20~29

30~39

40~49

50~59

60~69

70~79

80~89

90~99

100~109

110~119

120~129

130~139

140~149

150~159

160~169

170~179

180~189

190~199

200~209

210~219

220~229

230~239

240~249

250~255

Feature

All channel reset

Reserved
Run random pnogramme
Sound control

Reserved
Effect 1
Effect 2
Effect 3
Effect 4

Effect 5
Effect 6
Effect 7
Effect 8
Effect 9
Effect 10
Effect 11
Effect 12
Effect 13
Effect 14
Effect 15
Effect 16
Effect 17
Effect 18
Effect 19
Effect 20
Effect 21
Effect 22
Effect 23
Effect 24
Effect 25

. 7 .

10 Control Channel

Accept DMX512 control channel, detail as follow:

Channel

1 PAN

2 TILT

3 Color

Wheel

DMX-value

0~255

0~255

0~7

8~15

16~23

24~31

32~39

40~47

48~55

56~63

64~66

67~78

79~92

93~107

108~120

121~136

137~152

153~170

171~212

213~255

Feature

540°

270°

White

Blue

Yellow

Pink

Green

Red

Light Blue

orange red

White

From White To Blue

From Blue To Yello w

From Yellow To Pink

From Pink To Green

From Green To Red

From Red To Light Blue

From Light Blue To orange red

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with increasing speed

4 GOBO

Wheel

0~9 10~19 20~29 30~39

40~49 50~59 60~69 70~79

80~99

100~119

120~139

Gobo 1 Shake with inc reasing speed

Gobo 2 Shake with inc reasing speed

Gobo 3 Shake with inc reasing speed

. 8 .

Channel

4 GOBO

Wheel

5 GOBO
Rotation

6 Static

GOBO
Wheel

7 Shutter

DMX-value

140~159

160~179

180~199

200~219

220~237

238~255

0~10

11~127

128~191

192~255

Gobo 4 Shake with inc reasing speed

Gobo 5 Shake with inc reasing speed

Gobo 6 Shake with inc reasing speed

Gobo 7 Shake with inc reasing speed

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with increasing speed

Gobo rotate index
Positive and Negative Rotation with increasing speed

Positive Rotation with increasing speed

Negative Rotation with increasing speed

Feature

0~9 10~19 20~29 30~39 40~49

50~59 60~69 70~79 90~91

92~107

108~123

124~139

140~155

156~171

172~187

188~203

204~219

220~237

238~255
0~7

8~22

23~85

86~100

101~165

166~180

Static Gobo 1 Shake w ith increasing speed

Static Gobo 2 Shake w ith increasing speed

Static Gobo 3 Shake w ith increasing speed

Static Gobo 4 Shake w ith increasing speed

Static Gobo 5 Shake w ith increasing speed

Static Gobo 6 Shake w ith increasing speed

Static Gobo 7 Shake w ith increasing speed

Static Gobo 8 Shake w ith increasing speed

Positive rainbo w effect with inc reasing speed

Negative rainbo w effect with inc reasing speed

Close
Open

Strobe effect with increasing speed

Open

Pulse strobe

Open

80~89

. 9 .

Channel

7 Shutter

8 Dimmer

9 Focus

10 Prism

DMX-value

181~245

246~255

0~255

0~255

0~7

8~15

16~127

128~239

240~255

Feature

Random Shutter

Open

0~100% m echanic dimme r
Motori zed focus, zoom out to zoom in

White
Stop, static prism effect

Rotation prism effect Positive rainbow

Rotation prism effect Negative rainbow

Stop, static prism effect

That Control Display

1、Top menu, present the current operation:

DMX Signal

. 10 .

DMX Address: 001

DMX mode: select channel 1 - channel 512

2. Press the <MODE/ESC> button repeatedly until you reach the desired
menu function.Press the <ENTER> button to select the menu function
currently displayed, or to enable menu option. To return to the previous op
tion or menu without changing the value.Press the <MODE/ESC> button.

Current position designation

Current mode

1 . DMX Address <
2 . R u n

D M X A d d r e s s
A d d r e s s : 0 0 1

DMX Mode

Press the <DOWN> buttons to navigate
the digit,Press the <UP> buttons to navigate
the value

Press the <DOWN> buttons to navigate the digit,
Press the <UP> buttons to navigate the value.

Use the <UP>,<DOWN>,
and <ENTER> button to
scroll through these
menu items

2-Run
3-Pan

< 2-Run

Select: Fast

2-Run
Select: Slow

2-Run
Select: Sound

2-Run
Select: Slave

built-in program
auto quick running

built-in program
auto slow running

built-in program
sound control

built-in program
slave running state

. 11 .

3-Pan <
4-Tilt

4-Tilt <
5-Display

5-Display <
6-Pan Angle

6-Pan Angle <
7-Tilt Angle

3-Pan
Select: Normal

3-Pan
Select: Reverse

4-Tilt
Select: Normal

4-Tilt
Select: Reverse

5-Display
Select: Bright

5-Display
Select: 30 Close

6-Pan Angle
Select: 540

Pan mode
Positive

Pan mode
Negative

Tilt mode
Positive

Tilt mode
Negative

The Background lighting long-light

The Background lighting will turn
off affter 30 seconds if no buttons
are pushed

Pan 540°(For built-in program only)

7-Tilt Angle <
8-Channel

6-Pan Angle
Select: 360

6-Pan Angle
Select: 180

7-Tilt Angle
Select: 270

7-Tilt Angle
Select: 180

7-Tilt Angle
Select: 90

Pan 360°(For built-in program only)

Pan 180°(For built-in program only)

Tilt 270°(For built-in program only)

Tilt 180°(For built-in program only)

Tilt 90°(For built-in program only)

. 12 .

8-Channel <
9-Temp. Disp

9-Temp. Disp <
10-Reset System

10-Reset System <
11-Load set

1 -Load set <

1

1-DMX Address

8-Channel
Select: Advance

8-Channel
Select: Basic

T1 T2 T3
50 50 50

10-Reset System
Select: NO

10-Reset System
Select: OK

1 -Load set

1

Select: NO

1

1 -Load set
Select: OK

Basic / Advanced mode
Advance mode

Basic / Advanced mode
Basic mode

independent temperature of each LED

temperature

whole machine reset seletion
no reset

whole machine reset seletion
whole machine reset

load original state seletion
unload

load original state seletion
load original data

3、Service Functions. Press <MODE/ESC> at least 10 second,
goes into motor start bit adjustment.

Init Motor Set
Password:0000

Press the <DOWN> buttons to navigate the digit,
Press the <UP> buttons to navigate the value

1、moto vernier regulation manual. Manufacturing code:2323. enter code

and press "enter" enter the follow operation interface:

1-Pan Init <
2-Tilt Init

2-Tilt Init <
3-Color Init

<E NT ER >

<E NT ER >

1-Pan Init
Set: 128

2-Tilt Init
Set: 128

Motor start bit adjustment
for Pan

Motor start bit adjustment
for Tilt

. 13 .

3-Color Init <
4-Gobo 1 Init

4-Gobo 1 Init <
5-Grota Init

5-Grota Init <
6-Gobo 2 Init

6-Gobo 2 Init

<

7-Focus Init

7-Focus Init

<

8-Prism Init

8-Prism Init

< 8-Prism Init

9-Lamp Init

9-Lamp Init

< 9-Lamp Init

1-Pan Init

<E NT ER >

<E NT ER >

<E NT ER >

<E NT ER >

<E NT ER >

<E NT ER >

<E NT ER >

3-Color Init
Set: 128

4-Gobo 1 Init
Set: 128

5-Grota Init
Set: 128

6-Gobo 2 Init
Set: 128

7-Focus Init
Set: 128

Set: 128

Set: 128

Motor start bit adjustment
for Color wheel

Motor start bit adjustment
for Gobo wheel 1

Motor start bit adjustment
for Grota

Motor start bit adjustment
for Gobo wheel 2

Motor start bit adjustment
for focus

Motor start bit adjustment
for Prism

initial lamp brightness
modification

2、Password is 2322, enter the password and press <ENTER>, goes into

the item:

1-Prism Half < 1-Prism Half

2-Focus Half < 2-Focus Half

<E NT ER >

<E NT ER >

Set: 000

Set: 000

Prism motor half-step
modification

focus motor half-step
modification

After entering into the interface above, pressing the <MODE/ESC>
button can be back to the present running state or if no operating within 60s,
it will exit automatically.

. 14 .

Fault conditions

Lamp Hot：When the LED reach 90℃, it is protected by the system and turn
off automatically, and display will show "Lamp Hot".

Open：Under the condition that the temperature resistance of the LED is not
connected or already damaged, the display will be "open".

Short：Under the condition that the temperature resistance of the LED is short
circuited, the display will be "Short".

LEDMH S90