Involight LDF100 User Manual [ru]
LED Dancing Floor 100x100cm
This LED Dancing Floor lighting system offers tremendous range of color to change your surroundings. It is
designed for professional places, such as stages, disco, night clubs etc
A. SPECIFICATION
LEDs: R360pcs, G360pcs, B360pcs
8 color section in one
4 digital Led display for easy operation
3 pin XLR Power in/out
Selectable built-in programs, Auto running, DMX mode , slave mode,
sound-activated.
Selectable 2, 3, 4, 6, 7, 14, 26 DMX channel.
Size: 100x100x10cm
Weight: 50kgs
Power in:110V/240V 60HZ/50HZ
Power consumption: 80W
B. 1, the picture of front side
2, The control panel
1 of 1 pages
C. OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in program, Auto run, DMX mode, Slave
mode, sound mode.
Built-in programs-- running one of 17 built-in pr ograms
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound mode-- running by sound - activated
1. built-in programs
one program is a sequence of different steps, with Led dance floor 100x100cm yon can select 17 different Programs.
press“set up”and up/down buttons to select the programs (Pr. 01-Pr. 17) and select the desired program value (step
time, flash, Pr. 14-Pr. 17- Fade time)
For example,
Press “setup”button to move the cursor to select 02 and the desired Sp (step time)or Fs (flash speed)
Sp--step time value from 01-Full (100)
Fs--flash speed from 00-99
Fd—Fade time value from 00-99
2. Auto run mode
Running 15programs in a continuous loop, the frequency means the running times. it can be set up via the buttons
up/down
3. DMX mode
You can control the devices individually via your DMX-controller
1) Addressing
The control Board allows you to assign the DMX address which is defined as the first channel from which the Led
dance floor 100x100cm will respond the controller. For address setting, press “set up”buttons until the display shows
as follows: d.001~d.512
Set the desired address via the up/down buttons
2) DMX-PROTOCOL
The control Board allows you to set 1,2,3,4,5,6,7 DMX channel for different applications.
press“set up”button until the display is as follows: d-P1~d-P7
set mode :01
CH.1 CH.2 CH.3
RED GREEN BLUE
0-255 0-255 0-255
O=OFF O=OFF O=OFF
2 of 2 pages
1-255=DIM>BRIGHT 1-255=DIM>BRIGHT 1-255=DIM>BRIGHT
②Set mode: 02
CH.1 CH.2 CH.3 CH.4
RED GREEN BLUE MASTER DIMMER
0-255 0-255 0-255 0-255
O=OFF
1-255=DIM>BRIGHT
O=OFF
1-255=DIM>BRIGHT
O=OFF
1-255=DIM>BRIGHT
O=OFF
1-255=DIM>BRIGHT
③ set mode:03
CH:1- CH3 CH:1-CH3 CH:4-CH6
CH1 CH2 CH3 CH1 CH2 CH3 CH4 CH.5 CH6
R1
O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF
1-255=DIM
>BRIGHT
G1
1-255=DIM
>BRIGHT
.B1 R2
1-255=DI
M>BRIG
HT
1-255=DIM>
BRIGHT
G2
1-255=DI
M>BRIG
HT
.B2 R3
1-255=DIM
>BRIGHT
1-255=DIM>
BRIGHT
G3
1-255=DI
M>BRIG
HT
.B3
1-255=
DIM>B
RIGHT
CH:4-CH6 CH:7-CH9 CH:7-CH9
CH4 CH.5 CH6 CH7 CH.8 CH9 CH76
R4
O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF O=OFF
1-255=DIM
>BRIGHT
CH10 CH11 CH12 CH10 CH11 CH12
G4
1-255=DIM
>BRIGHT
CH:10-CH12 CH:10-CH12
.B4 R5
1-255=DI
M>BRIG
HT
1-255=DIM>
BRIGHT
3 of 3 pages
G5
1-255=DI
M>BRIG
HT
.B5 R6
1-255=DIM
>BRIGHT
1-255=DIM>
BRIGHT
CH:13 CH:14
CH.8
G6
O=OFF
1-255=DI
M>BRIG
HT
CH9
.B6
O=OFF
1-255=
DIM>B
RIGHT
Loading...