Involight LD100 User Manual [ru]

DMX LED Messenger Operation Manual

DMX LED Messenger can make colorful and dynamic light scenery effects. Its effect is quite similar as a laser with its shinning and
brilliant beams, but even more dynamic and impressive. Furthermore, it can show some active phrases which include the built-in 10
phrases and 5 your editing phrases.

It is widely applied to entertainment halls, clubs, discotheques, theatres, stages, even shops, hotels etc.

Specification:

1) Weight: 5.25kgs

2) Size: 295x280x280mm

3) Power input: AC 120V/240V, 60Hz/50Hz

4) Wattage: 60W

5) LEDS: 192PCS RGB (96 RED, 48 GREEN, 48 BLUE)

6) Beam angle: 15degree

7) 3PIN female XLR socket and 3PIN male XLR socket

8) Built-in microphone

9) Led display and IR remote for easier operation.

10) Creates various RGB patterns via four LED matrixes

11) Built-in programs and phrases, sound active, M/S, DMX mode

12) Edit phrase or Names by IR remote

Operation:

There are 5 working modes: Select built-in programs, Auto run mode, DMX mode, Sound active mode, Master/Slave mode

A, Select Built-in Programs and Edit Phrases
1, Select Built-in Programs via buttons on the projector.

⑴, “MODE” button

By pressing “MODE” button of the led display, until the LED displays show “ P r X X”, then select any programs via “UP” and “DOWN”.
Please note PR is the abbreviation of programs,
Pr01 is for the programs of 15 phrases.
Pr02-Pr22 are the built-in effect programs.

⑵, “SET UP” button

①,After pressing “MODE” button of the led display, if you set “P r 0 1”,

a), if press “SET UP” button for the first time, it shows “r d X X”， then select any built-in phrases via “UP” and “DOWN”

*rd01--rd10 are the built-in phrases from the unit（Happy Birthday、Merry Christmas、Happy Holidays、Happy Halloween、Happy

Hanukkah、Happy Thanksgiving、Last Call、Party!!、Drink Specials）， rd11--rd15 are the phrases which can be edited by the users.

b),if press “SET UP” button for the second time, it shows “S X X X”, then you can set the speed value from “S001” to “S100”via “UP”

and “DOWN”.
c),if press “SET UP” button for the third time, it shows “F X X X”, then you can set the flash frequencies via “UP” and “DOW N”.

②,After pressing “MODE” button of the led display, if you set “Pr02” to “Pr22”

a),if press “SET UP” button for the first time, it shows “S X X X”， then you can set the speed value from “S001” to “S100”via “UP” and

“DOWN”.
b),if press “SET UP” button for the second time, it shows “F X X X”, then you can set the flash frequencies from “F001” to “F100”via
“UP” and “DOWN”.

⑶, Store phrases

if press “SET UP” button for the first time, it shows “r d X X”.
For example, you select “r d 0 1”, please have this phrase run completely from left to right, from right to left, from down to upper, from

upper to down. If running for twice or more, please press “UP” or “DOWN”, then this phrase will be stored in the memory. When auto run
mode or DMX mode or Master/slave mode, the stored phrases can be recalled to display automatically from the system.

⑷, Delete phrases

if press “SET UP” button for the first time, it shows “r d X X”.
For example, if you want to delete the phrase of “r d 0 1”, then select “r d 0 1” to run from left to right, from right to left, from down to

upper, from upper to down for less than twice, please press “UP” and “DOWN”, then this phrase will be deleted from the memory. When
auto run mode or DMX mode or Master/slave mode, the stored phrases will not display.

2, Select built-in Programs by IR remote.

⑴, Press “SELECT PROG” button, then it will show “ P r X X” (P r 0 1—P r 22). Select preferable programs via “UP” and “DOWN”

①, Press “FLASH” button, it shows “F X X X”, then you can set the flash frequencies from “F001” to “F100”via “UP” and “DOWN”.

②,Press “SPEED” button, it shows “S X X X”，then you can set the speed value from “S001” to “S100”via “UP” and “DOWN”.

⑵, if you select “ P r 0 1”,

press “SELECT PROG” button for the second time. it shows “r d X X”， then select any built-in phrases to run or store via “UP” and

“DOWN”.

① Store phrases

For example, you select “r d 0 1”, please let this phrase to run completely from left to right, from right to left, from down to upper, from
upper to down. If running for twice or more, then press “UP” or “DOWN”, then this phrase will be stored in the memory. When auto run
mode or DMX mode or Master/slave mode, the stored phrases can be called to display automatically by the system.

②, Delete phrases

For example, if you want to delete the phrase of “r d 0 1”, then select “r d 0 1” to run from left to right, from right to left, from down to
upper, from upper to down for less than twice, please press “UP” and “DOWN”, then this phrase will be deleted from the memory. When
auto run mode or DMX mode or Master/slave mode, the stored phrases will not display.

3, Edit Phrases by IR Remote
Please note you can only use IR remote to edit phrases.

“r d 1 1” to “r d 1 5” is the storage for users to edit preferable phrases, every phrase is at most 30 letters.