Page 1
400mW RGB Animation Laser
User Manual
DLS400D
Please read this manual carefully before use!
Page 2
- - 1 - -
Contents
Introduction--------------------------------------------------------------------------------------------P2
Silkscreen on product------------------------------------------------------------------------------P3
Safety instruction/Installation/Technical specification---------------------------------P4
MENU----------------------------------------------------------------------------------------------------P5
DMX512 Channel----------------------------------------------------------------------------------P5-6
DMX512 connection-------------------------------------------------------------------------------P6
DMX address setting/Ringing-----------------------------------------------------------------P7
Cleaning and maintenance/Warning------------------------------------------------------- P8
Warranty card---------------------------------------------------------------------------------------P9
Page 3
- - 2 - -
Introduction
Thank you for purchasing this product. To optimize the performance of this
product,prior to use,please read these operating instructions carefully to familiarize
yourself with the basic operation of this unit.Please keep the manual in safe price for
future reference.
This unit has been tested at our factory before being shipped to you, there is no
assembly required.
Once after received this product , please take and put carefully. And check cautiously
that whether the product was damaged or not during the transportation.
Checking Parts
Please check if the following parts are included:
1 x Laser light
1 x User manual
1 x Power cable
Caution
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Warning!
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
Page 4
- - 3 - -
Symbol Instruction On The Device
-------------------------------------------------------------------------------CE Certificate
---------------------------------------------------------------------Only indoor use
------------------------------------------------------------------------Environmental protection
----------------------------------------The minimum distance from lighted objects(meter)
------------------------------------------------------------Max. Ambient Temp
----------------------------------------------------Max. Housing Temp
------------------------------------------------------------------------- Safety caution
-------------------------------------------------------------------------Careful burns
------------------------------------------------------------------------Careful electric shock
-----Not suitable for directly installed on the surface of ordinary combustible materials
Page 5
- - 4 - -
Safety Instructions
Please open and check whether break or not for transport once receive this fixture, if
yes, not use it and contact dealer or manufacture as soon as possible.
The Max applicable temperature for the light is 40°C. Do not use the light under or
above the temperature. ta=40℃
The fixture is applicable for many occasions, it should keep clean, and avoid long
use in overheating or dusty environment. To prevent the fixture from the chemical
liquid .
User must be careful of fire, heat, electric and fall-off that make heavy or fatal injury.
Please read this user manual carefully before power on and installation, following
safety and operation instruction in it. If still have any questions, please contact
dealer or manufacture.
User must following this user manual, do not open fixture by yourself, if any
problems, please contact professional technician, maintenance should by
technician.
Do not power on or start the fixture before installation, please stop after working more
than 8 hours, which will longer use life.
Fixed installation, do not by strong shocks.
The minimum distance between light and the illuminated surface must be more than
1 meter.
Never look directly into the light source to avoid hurt to eyes (especially epileptics)!
When dustproof glass at light output breaks, cracks or other visible damage, user
should replace with new glass to continue to use.
Installation
When install this equipment please make sure there's no
flammable surfaces (decorated things, etc) and minimum distance of
0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold
10 times the weight and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an
appropriate safety rope.Never stand directly below the device when mounting,
removing or servicing the fixture.
Technical Specifications
Input voltage: AC100-240V, 50/60Hz
Page 6
- - 5 - -
Fuse: BGDP ￠5x20mm 250VAC F2A
Total power:15W
Light source: 400mW(R:200mW/650nm+G:50mW/532nm+B:150mW/450nm)
Control mode: Auto/Sound/DMX512/Master-slave
Channels：13CH
Scanning system: 15Kpps Scanner, ±30º
51 internal patterns for show
Surface temp: Tb=45ºC ( this data testing when the environment temp is 30ºC)
Working temp: 10ºC--65ºC
Modulation: TTL
N.W: 2.39Kg
Product size: 188*193*173mm
Laser control system
MENU UP DOMN ENTER
Press button marked as “MENU” to select a function. For details, please see the “OPERATION
MENU” section. Press button marked as “UP” or button marked as “DOWN” to modify values . Press
button marked as “ENTER” to save your settings.
1. MENU display
MENU
Display
Function
Addr
1-512
DMX address setting
AUTO
0-9
Auto mode
SOUN
0-9
Sound mode
DMX Channel Instructions
Channel
Function
Value
Details
CH1
Control mode
0-9
No function
10-99
Auto mode
100-199
Sound mode
200-255
DMX mode
CH2
Patterns option
0-255
Patterns option
CH3
Gobos size
0-63
Gobos size option
64-127
Gobos speed option from small to large
Page 7
- - 6 - -
128-191
Gobos speed option from larger to small
192-255
Zoom speed size option
CH4
Centre move
0-127
Rotation angle option
128-191
Clockwise rotation speed option
192-255
Anti-clockwise rotation speed option
CH5
Gobos Horizontal
Move
0-127
Gobos Pan rotation position option
128-255
Gobos Pan rotation speed option
CH6
Gobos Vertical
Move
0-127
Gobos Tilt rotation position option
128-255
Gobos Tilt rotation speed option
CH7
Pan move
0-127
Pan position option
128-255
Pan move speed option
CH8
CH8
Tilt move
Tilt move
0-127
Tilt position option
128-255
Tilt move speed option
CH9
Wave
0-1
No function
2-127
Wave phase option
128-255
Wave range and speed option
CH10
Gobos drawing
0-9
no drawing
10-63
gradual drawing by manual adjust
64-127
auto gradual drawing （increasing）
128-191
auto gradual drawing （decreasing）
192-255
auto gradual drawing circularly
CH11
Color control
0-127
Color fixed
128-159
Eotic color change without subsection
160-191
Eotic color change mode 1 with subsection
192-223
Eotic color change mode 2 with subsection
224-225
Eotic color change mode 3 with subsection
CH12
Color change
and speed
0-9
Color no change
10-255
Color change speed from slow to fast
CH13
Display
0-63
Normal display
64-127
Brightness dot display
128-255
Dot display
DMX-512 connection
Page 8
- - 7 - -
DMX In To the fourth
First light (Address 001) Second light (Address 014) Third light(Address 027)
DMX Address setting
Each fixture must set a specific starting address. When receiving signal
transmission, fixture will receive channel control signals which from the starting
address.
According to different requirements or easy to use, the user can set many value
fixtures to the same address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal.
All connecting fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set
the starting address and begin accepting DMX512 control signal, so that more
convenient separate control one device. Using this method must be based on channel
quantity of device to determine a starting address.
This laser light has 13 channels.you should set the starting address of the first
unit to 1, the second unit to 14(1 + 13), the third unit to 27 (13*2+ 1), and so on.
Page 9
- - 8 - -
Ringing
1 Mounting bracket
2 Handle
A).The ambient temperature range is 1°C--45°C, must never be exceeded.
B).The installation of the projector has to be built and constructed in a way that it can
hold 10 times the weight for 1 hour without any harming deformation.
C)).When rigging or servicing the fixture staying in the area below the installation
place, on bridges,under high working places and other endangered areas is
forbidden.
D).The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert before taking into operation for the first time
and after changes before taking into operation another time.
E).The operator has to make sure that safety-relating and machine-technical
installations are approved by a skilled person once a year.
F). Sure M8 screws on mounting bracket fixed middle hole ¢12.5mm of handle
Page 10
- - 9 - -
Cleaning and maintenance
Maintenance should be performed every 15-day period, by using a sponge which is dipped
with alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
Always disconnect from the mains when the device is not in use or before cleaning it.
Warning
Warranty Card
This product is made of high-brightness transistor. We will provide 1 year warranty
under the condition that user has operated the light normally and lifetime service. We
won't provide warranty if the damage is caused by artificial or force majeure event.
Cost of fittings should be charged by user if product need maintenance after 1
year .Please cut this warranty card and shipped it along with the product to our
factory when applying for warranty.
Product：
Purchasing date：
Code of invoice：
Warranty date: From To
User’s name： Add：
Company： Tel：
Make sure power off before cleaning and maintenance!
Caution
Warning!
Never look directly into the light source,as sensitive persons may suffer an epileptic
shock(especially meant for epileptics)!
Warning!
Any power connected must by professional person
Loading...