USER MANUAL Návod k obsluze
EN CZ SK DE HU
CLIQ
TWS EARPHONES
Product diagram
1 - Microphone 2 - Microphone 3 - LED indication 4 - touch control area 5 - ear tip 6 - LED indication 7 - charging case 8 - USB-C charging interface
Pairing
After being taken out from the charging case, the earphones will be paired automatically. Pairing with the smartphone :
1)Take out the earphones from the charging case and confirm that the earphones are waiting to be paired. At this time, the two earphones flash blue lights quickly.
2)Turn on the smartphone's Bluetooth, search Bluetooth devices and click 'CLIQ'. A voice prompt as 'Connected' will sound then.
3)After the pairing is successful, take out the earphones from the charging case and they will pair with the smartphone automatically.
Powering ON / OFF
Power ON
Method 1: Take out the earphones from the charging case, the earphones will auto-boot. Method 2: In the o state,press and hold the touch area of the earphones for 1 seconds,
the earphones will turn on, and you can hear the prompt "power on".
POWER OFF
Method 1: Put the earphones into the charging box. They will shut down automatically. Method 2: Turn o the Bluetooth switch of mobile phone, and the earphone will
automatically shut down in five minutes.
Method 3: Turn o the Bluetooth switch on your mobile phone, press the earphone for 1 second and the earbuds will shut down.
Listen to the music
Play / Pause |
Touch the left or right earphone twice gently. |
Previous |
Press and hold the touch area of the left earphone for 2 seconds. |
Next |
Press and hold the touch area of the right earphone for 2 seconds. |
Volume + |
Touch the right earphone once gently. |
Volume - |
Touch the left earphone once gently. |
Calling
Answer call |
Touch the left or right earphone once gently |
Hang up |
Touch the left or right earphone twice gently. |
Cancel dialing |
During dialing, press the left or right earphone for 2 seconds. |
Reject call |
Press the left or right earphone for 2 seconds. |
Voice assistant
Wake up / Cancel voice assistant: Touch the left or right earphone three times gently.
RESET function
1)Delete the connection between the earphone and the phone.
2)Take out both earbuds from the case and once the are flashing blue, tap 5x quickly the right earbud and then 5x the left earbud. LED indication on both earbuds goes out, then it starts flashing red / blue alternately and finally it starts flashing blue.
3)Now you can repeat the pairing process with your phone.
Charging
The earbuds and the charging case need to be fully charged prior to first use!
Earphones: Put the earphones into the charging box, the charging case will automatically charge the earphone, and the earphone will display a red light when charging.
Charging case: Use the included USB-C cable to charge the case.
LED indication on the earbuds
STATUS |
Indicator light |
Not paired |
Red and blue lights flash quickly |
Waiting to be paired |
One blue light flash quickly |
Paired succesfully |
The indicator light is o |
Powered ON |
Red and blue light up quickly for 1 second |
Powered OFF |
The indicator light is o |
Play |
The indicator light is o |
Pause |
The indicator light is o |
StandBy |
The indicator light is o |
Incoming call |
Blue light flashes twice every 3 seconds |
Call in progress |
The indicator light is o |
Charging |
Red light is always on |
Charging complete |
The indicator light is o |
LED indication on the case |
|
STATUS |
Indicator light |
Case Charging status |
When charging, the indicator light will gradually become |
|
bright or dim. Power indicator: Red light: 5-35%; |
Buds charging status |
yellow light: 35 -70%; green light: 70%-100%. |
When it is put in the charging box, the corresponding |
|
|
LED in the case will be on according to its own power, flashing |
Charging complete |
twice first and then continuously lighting for about 8 seconds. |
Green light turns o after 8 seconds. |
|
Charging error |
Red light flashes quickly. |
Voice prompts
Status |
Prompt |
Power on |
power on |
Power o |
power o |
Low battery |
power low |
Pairing |
pairing |
Paired successfully |
connected |
Disconnect |
disconnected |
Maximum volume |
"DiDi" |
Minimum volume |
"DiDi” |
Special instructions
1)Apple iPhones and some Android phones can support the adjustment of phone volume if you need to use headphones to adjust the volume; but for some Android phones, you can only adjust the volume of earphone itself. If you need to restore the default volume, put the earphones in the charging box and take them out after the red light turns on.
2)When holding the earphone, do not touch the touch panel area of the earphone to avoid misoperation.
Precautions
1)The case with earbuds need to be fully charged prior to first-time use.
2)If the earbuds are left unused for over two weeks, please recharge the case with earbuds periodically.
3)Listen with the volume setting as low as possible. Listening at high volume for an extended period may result in permanent damage to your hearing.
4)Keep your earphones and accessories out of reach of children. Children should use the earphones only under adult supervision.
5)Do not expose the earphones to water for a prolonged period. Do not use it when swimming, diving, or in the shower.
6)Using your earphones in a moist or dusty environment, or near a strong magnetic field, may result in an internal circuit failure.
7)Do not store your earphones in an environment where the temperature is below -15°C or above +S0°C.
8)Do not charge the earphones and the charging case in an environment where the temperature is below 0°C.
9)Do not expose your earphones or charging case to direct sunlight
(such as on a window sill or on a car dashboard) for an extended period of time.
10)To avoid damage to your earphones, do not disassemble or tamper with them, and do not insert any foreign matter into them.
All information in this document is subject to change.
www.intezze.com
NÁVOD K OBSLUZE
CLIQ
TWS EARPHONES
Popis produktu
1 - Mikrofon 2 - Mikrofon 3 - LED indikace |
4 - dotyková plocha |
5 - nástavec 6 - LED indikace 7 - Dobíjecí pouzdro |
8 - nabíjecí konektor USB-C |
Párování
Po vyjmutí z pouzdra se sluchátka automaticky navzájem spárují.
Postup spárování sluchátek s telefonem:
1)Vyjměte obě sluchátka z pouzdra a vyčkejte, dokud se nepřepnou do párovacího režimu. Tento stav je potvrzen rychlým blikáním obou LED diod modře.
2)Na telefonu zapněte funkci Bluetooth a v dostupných BT zařízeních vyhledejte „CLIQ”. Potvrďte spárování. Následně se ozve potvrzující hlášení „Connected”.
3)Při dalším vytažení z pouzdra se sluchátka automaticky připojí k naposled spárovanému zařízení v dosahu.
Zapnutí / vypnutí
ZAPNUTÍ
Metoda 1: Sluchátka se zapnou automaticky po vyjmutí z dobíjecího pouzdra. Metoda 2: Pokud jsou sluchátka vypnutá, zapnete je ručně přidržením obou
dotykových ploch cca 1 sekundu.
VYPNUTÍ
Metoda 1: Sluchátka se automaticky vypnou po uložení do pouzdra. Metoda 2: Sluchátka se automaticky vypnou také pokud vypnete funkci
Bluetooth na telefonu.
Metoda 3: Vypněte Bluetooth na telefonu a sluchátka vypněte ručně přidržením obou dotykových ploch na sluchátkách cca 1 sekundu.
Poslech hudby
Play / Pauza |
2x klepněte na levou nebo pravou (L / R) dotykovou plochu sluchátka |
Předchozí |
Přidržte dotykovou plochu levého (L) sluchátka 2 sekundy |
Následující |
Přidržte dotykovou plochu pravého (R) sluchátka 2 sekundy |
Hlasitost + |
Jednou klepněte na plošku pravého (R) sluchátka pro zesílení o krok |
Hlasitost - |
Jednou klepněte na plošku levého (L) sluchátka pro zeslabení o krok |
Telefonování se sluchátky
Přijetí hovoru |
Klepněte na L nebo R dotykovou plochu 1x |
Zavěšení |
Klepněte na L nebo R dotykovou plochu 1x |
Zrušení vytáčení |
Během vytáčení přidržte L nebo R dotykovou plochu 2 s |
Odmítnutí |
U příchozího hovoru přidržte L nebo R dotykovou plochu 2 s |
Hlasový asistent
Pro aktivaci hlasového asistenta klepněte 3x na L nebo R dotykovou plochu sluchátek.
RESET sluchátek
1)Odeberte „CLIQ” ze seznamu spárovaných zařízení na telefonu (zrušit párování).
2)Vyjměte sluchátka z pouzdra a jakmile začnou obě blikat modře, poklepejte rychle za sebou nejprve pravé (R) a následně hned levé (L) sluchátko 5x. Sluchátka
na okamžik zhasnou, poté se rozblikají červeně + modře a nakonec obě začnou blikat modře.
3)Nyní mohou být sluchátka opět spárována s telefonem jako při prvním použití.
Loading...