intersil EPTSSOP DATA SHEET

查询M24.173B供应商

Plastic Packages for Integrated Circuits

Thin Shrink Small Outline Exposed Pad Plastic Packages (EPTSSOP)

INDEX AREA

123

TOP VIEW

0.05(0.002)

-AD

0.10(0.004) C AM BS

123

BOTTOM VIEW

-B-

SEATING PLANE

-C-

0.25(0.010) BM M

GAUGE

PLANE

0.25

0.010

0.10(0.004)

M24.173B 24 LEAD THIN SHRINK SMALL OUTLINE EXPOSED PAD PLASTIC PACKAGE

INCHES MILLIMETERS

SYMBOL

NOTESMIN MAX MIN MAX

A - 0.047 - 1.20 -

A1 0.000 0.006 0.00 0.15 A2 0.031 0.051 0.80 1.05 -

b 0.0075 0.0118 0.19 0.30 9 c 0.0035 0.0079 0.09 0.20 D 0.303 0.311 7.70 7.90 3

E1 0.169 0.177 4.30 4.50 4

e 0.026 BSC 0.65 BSC E 0.246 0.256 6.25 6.50 L 0.0177 0.0295 0.45 0.75 6 N24 247

P - 0.197 - 5.00 11

P1 -0.126-3.2011

Rev. 1 11/03NOTES:

1. These package dimensions are within allowable dimensions of JEDEC MO-153-ADT, Issue F.

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash, protrusion and gate burrs shall not exceed

0.15mm (0.006 inch) per side.

4. Dimension “E1” does not include interlead flash or protrusions. Interlead flash and protrusions shall not exceed 0.15mm (0.006 inch) per side.

5. The chamfer on the body is optional. If it is not present, a visual index feature must be located within the crosshatched area.

6. “L” is the length of terminal for soldering to a substrate.

7. “N” is the number of terminal positions.

8. Terminal numbers are shown for reference only.

9. Dimension “b” does not include dambar protrusion. Allowable dambar protrusion shall be 0.08mm (0.003 inch) total in excess of “b” dimension at maximum material condition. Minimum space between protrusion and adjacent lead is 0.07mm (0.0027 inch).

10. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact. (Angles in degrees)

11. Dimensions “P” and “P1” are thermal and/or electrical enhanced variations. Values shown are maximum size of exposed pad within lead count and body size.