International Comfort Products CRLVHLGD004A00, CRLVHLGD011A00, CRLVHLGD016A00, CRLVHLGD020A00, CRLVHLGD024A00 Installation Manual

...

CRLVHLGD004A00 CRLVHLGD011A00-CRLVHLGD016A00, CRLVHLGD020A00-CRLVHLGD024A00 CRLVHLGD032A00

Installation Instructions

SMALL ROOFTOP UNITS

ACCESSORY LOUVERED HAIL GUARD

GAS HEATING/ELECTRIC COOLING,

ELECTRIC COOLING AND HEAT PUMP UNITS

3to15TONS

PACKAGE USAGE

50TCQ08--- 12 548J*08---12 CRLVHLGD004A00

48/50TC*04,

50TCQA04 50HCQ 04

48/50TC*05--- 06

50TCQA05

48LC/50LC*04

48/50HC*04

50HCQ 05---06

48/50TC*07

50TCQA07

48/50LC*05--- 06

48/50HC*05---06

50HCQ 07

48/50TC*A, D 08{

48/50HC*07

48/50TC*A09{ 580J*09(A,C){/558J*09(A){ CRLVHLGD015A00 50HCQ 08 ---09

48/50LC*07

48/50TC--- D09{,

48/50TC*A,D12{,

48/50TC*D14{

48/50HC*08---12

48/50TC*D08 580J*08(D,F)/558J*08D CRLVHLGD020A00 48/50TC*D12 580J*12(D,F)/558J*12D CRLVHLGD021A00 48/50TC*D14 580J*14(D,F)/558J*14(D) CRLVHLGD022A00

50TCQA06 548J*06 CRLVHLGD023A00

48/50LC*08

48/50LC*09--- 12

48/50TC*16{

48/50HC*14

{ Round tube plate fin outdoor coil only

Rooftop Unit Model Hailguard

580J*04/558J*04,

548J*04

549J 04

580J*05---06/558J*05 --- 06,

548J*05

581J*04/551J*04

548J 05--- 06

580J*07/558J*07,

548J*07

581J*05---06/551J*05 --- 06

549J 07

580J*08{/558J*08{

581J*07/551J*07

549J 08--- 09

580J*09(D,F,K,M){/580J*12{,

580J*14 (D,F,K,M){/

558J*09(D,K){

558J*12{,

558J*14(D,K){

581J*08---12/551J*08 --- 12

50TCQ14 50HCQ12

548J*14

549J 12

580J*16{/558J*16{

581J*14/551J*14

CRLVHLGD011A00

CRLVHLGD012A00

CRLVHLGD013A00

CRLVHLGD014A00

CRLVHLGD016A00

CRLVHLGD024A00

CRLVHLGD032A00

ICP PACKAGE USAGE

Rooftop Unit Model{ Hailguard

RHS090---120 CRLVHLGD004A00

RGS/RAS036, RHS036 CRLVHLGD011A00

RGS/RAS048--- 060

RHS048, RHH 036, RGH /RAH036

RGS/RAS072, RHS072,

RGH/RAH048---060

RGS/RAS090, 091, RGH /RAH072, RHH 072 CRLVHLGD014A00

RGS/RAS150, RGH/RAH090 102, 120, RHH 090 --- 102

RGS/RAS180, RGH/RAH150, RHH 120 CRLVHLGD032A00

{ Round tube plate fin outdoor coil only

RHH 048 --- 060

RGS/RAS101 CRLVHLGD015A00

RGS/RAS102, RGS/RAS121.120,

RHS060 CRLVHLGD023A00 RHS150 CRLVHLGD024A00

CRLVHLGD012A00

CRLVHLGD013A00

CRLVHLGD016A00

PACKAGE CONTENTS

QTY CONTENTS

1 Outside coil side panel

1 Outside coil end panel

1 Control box side panel*

10 Plastic inserts*

Varies based on kit Screws

* CRLVHLGD024A00 and 032A00

SAFETY CONSIDERATIONS

Installation and servicing of air-conditioning equipment can be hazardous due to system pressure and electrical components. Only trained and qualified service personnel should install, repair, or service air-conditioning equipment.

Untrained personnel can perform basic maintenance functions of cleaning coils and filters and replacing filters. All other operations should be performed by trained service personnel. When working on air-conditioning equipment, observe precautions in the literature, tags and labels attached to the unit, and other safety precautions that may apply.

Follow all safety codes. Wear safety glasses and work gloves.

Recognize safety information. This is the safety--alert symbol

instructions or manuals, be alert to the potential for personal injury.

Understand the signal words DANGER, WARNING, and CAUTION. These words are used with the safety--alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies a hazard which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.

. When you see this symbol on the unit and in

WARNING

ELECTRICAL OPERATION HAZARD

Failure to follow this warning could result in personal injury or death.

Before performing service and maintenance operations on unit, turn off main power switch to unit. If gas unit, shut off gas supply before shutting off main power. TAG DISCONNECT SWITCH WITH A SUITABLE LOCK AND WARNING LABEL.

IMPORTANT: Read these instructions completely before attempting to install the accessory louvered hail guard.

GENERAL

Louvered hail guard packages are designed to protect the rooftop unit condenser coil from hail and general contact damage. Excessive damage to rooftop unit outdoor coils can result in diminished performance due to reduced air flow over the heat transfer surfaces.

INSTALLATION

(FOR ALL KITS EXCEPT

CRLVHLGD024A00 AND 032A00)

1. Verify the correct hail guard part number is provided for the desired rooftop unit size. See Package Usage section above.

2. Remove the screws in the top panel of the rooftop unit above the condenser coil. Save the screws.

3. Remove the screws at the base of the outdoor coil where the hailguard panel will be installed. Save the screws.

4. Align the hailguard panel with the respective section of the outdoor coil and insert the top edge of the panel under the lip of the top panel. (See Fig.

1.)

5. Re--insert top and bottom screws from Steps 2 and 3 to hold the hailguard in place.

6. Insert side screws from the kit through the holes in the side(s) of the hailguard panels. The provided self tapping screws may be required for these screws.

+ 4 hidden pages