Intermec Sabre 1545, 1545 User Manual

Page 1
P/N 057286-003
1545 Bar Code Laser Scanner
User’s Guide
6001 36th Avenue West PO Box 4280 Everett, WA 98203-9280 Phone (206) 348-2600
Page 2
Regulatory Statements
• This device meets Class B limit requirements of CISPR 22.
SPECIFICATIONS SAFETY APPROVALS
LASER PRODUCT USE - UL Listed, UL 1950 1st Edition USA - CDRH Class II Canada - CSA Certified C22.2 - 220/M1986 International - IEC 825 Class 2 Europe - TUV Rheinland Licensed
EN 60 950 (IEC 950) and DIN IEC 825
The 1545 Laser Scanner is UL Listed, CSA Certified and TUV licensed when used with Intermec's Models 944X, 946X, 9450, 951X, 954X, 955X, 956X, 957X, 971X, 972X, J2010X and J205X Readers. It is UL Listed for use with other readers, only when these readers are UL Listed with Class 2 outputs.
Patent Information
This scanner is the subject of patents applied for by Intermec. This scanner is also protected by one or more of the following U.S. patents and equivalent foreign patents:
4,334,301 4,387,297 4,409,470 4,593,186 4,760,248 4,816,660
Page 3
Introduction
Introduction
1545
1545UG-002
The Intermec 1545 series laser scanners deliver quick, effortless bar code scanning and can read even marginal quality bar codes almost instantly. The scanners are reliable and can withstand demanding industrial applications. With their low power solid state visible laser diode, the 1545s are particularly appropriate for portable applications. A 1545 with a fully charged reader can be used for a full day of data collection.
1545E
General purpose scanner, 670 nm light.
1545F
Has added capability of being compatible with specific third party readers, 670 nm light.
1545G
Same as 1545E, except its 650 nm light appears brighter.
Page 4
1545UG-003
1
Unpack the scanner and inspect it for physical damage.
Connect cable to reader (scanner plug to reader socket).
1
2
3
keyboard
terminal
1
2
3
keyboard
terminal
1545UG-006
97XX Reader
2
Connect cable to scanner (cable sold separately).
Laser Safety Information
LASERSTRAHLUNG - NICHT
IN DEN STRAHL BLICKEN
1.0mW - 650/670nm
LASER KLASSE 2
VDE 0837/0286
IEC 825 : 1984 HD 482 : S1
IEC 825 : 1984 HD 482 : S1
RADIAZIONE LASER
NON FISSARE IL FASCIO
APPARECCHIO LASER DI CLASSE 2
In Accordo con la Norma CEI 76-2 (1984)
1.0mW - 650/670nm
IEC 825 : 1984
HD 482 : S1
LASER LIGHT - DO NOT
STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0mW - 650/670nm
IEC 825 : 1984
NF C43-801 HD 482 : S1
APPAREIL A RAYONNEMENT
LASER DE CLASSE 2
RAYONNEMENT LASER - NE PAS REGARDER DANS LE FAISCEAU
1.0mW - 650/670nm
IEC ENGLISH
FRENCH
GERMAN
ITALIAN
NORWEGIAN - DANISH
IEC 825 : 1984
CEI 825 : 1984
SPANISH
JAPANESE
IEC 825 : 1984
SWEDISH / FINNISH
IEC 825 : 1984
HD 482 : S1
SSIFS 1980 : 2
LASERSTRÅLING
1.0mW - 650/670nm
INN I STRÅLEN
KLASSE 2 LASER PRODUKT
STIRR IKKE
LUZ LASER - ¡NO
MIRE HACIA EL RAYO!
1.0mW - 650/670nm
CATEGORIA 2
PRODUCTO LASER
HD 482 : S1
NEK-HD 482 : S1(1988)
1.0mW - 650/670nm
LASERSTRÅLNING
VARNING
I STRÅLEN
LASER DIODE
KLASS 2
STIRRA EJ IN
VAARA
LASERSATEILYA
ALA TUIJOTA SATEESEEN
LUOKAN 2 LASER
:1mW
670nm
650/
:
1545UG-020
Page 5
Installation
9450 Reader
1545UG-004
9440
944X Reader
1545UG-009
®
1545UG-008
95XX Reader
1545UG-021
J2010X Reader
1545UG-019
1545UG-005
946X Reader
Page 6
944X Portable Readers 946X Portable Readers 9450 RF Vehicle Mount Readers 95XX Wedge/Network Readers 97XX Wedge Readers J2010X Terminals
Holster and Belt (Part Number 053175)
WARNING
Do not look directly into the window area or at a reflection of the laser beam while the laser is scanning. Long term exposure to the laser beam can damage your vision.
AVERTISSEMENT
Ne regardez pas directement la réflexion d'un rayon laser ou dans la fenêtre du laser lorsque celui-ci est en opération. Si vous regardez trop longtemps un rayon laser, cela peut endommager votre vision.
CAUTION
There are no user serviceable parts inside the 1545. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure of up to 2mW at 650 or 670 nm.
NOTE: There are no controls or adjustments provided for routine operation and maintenance of the 1545.
ATTENTION
La 1545 ne contient pas de pièces révisibles par l'utilisateure. L'emploi de commandes ou d'ajustements ou de performances des procédures autres que ceux précisés dans cette documentation pourrait avoir comme résultat l'exposi­tion à l'irradiation laser nuisible de jusqu'à 2mW à 650 ou 670 nm.
NOTE: Vous ne disposez k'aucun controle ni reglage pour le fonctionnement et l'entetier courants du 1545.
Laser Safety Information
Troubleshooting & Laser Safety Information
AVOID EXPOSURE Laser light is Emitted from
this Aperture
EVITER
TOUTE EXPOSITION Lumiere Laser Emis par cette
Ouverture
1545
AVOID EXPOSURE Laser light is Emitted from this Aperture
EVITER
TOUTE EXPOSITION Lumiere Laser Emis par cette
ouverture
1545
1545UG-018
Page 7
Document Stand
The document stand requires that two interface cables be purchased before use: one to connect it to the reader and another to connect it to the scanner.
Doc. Stand Scanner to to Reader Doc. Stand
Reader Cable P/N Cable P/N
95XX 054866 052901 97XX 054867 052901
To Reader
Doc. Stand
1545UG-014
1545UG-013
Cables & Accessories
Page 8
(for wedge/network readers only).
WRONG
*123*
Angle of Operation
For a quick read, hold the scanner at a slight
angle to the bar code.
Operation
*123*
Vertical reading angles (pitch)
1545UG-015
*123*
Horizontal reading angles (skew)
1545UG-017
Dead Zone
Reflected light may prevent a good read when you aim straight on.
1545UG-016
Loading...