Inter-M PAC-5000 Brochure

Download

Page 1

DIGITAL 2BUS PA COMBINATION SYSTEM

PAC-5000

Page 2

PAC-5000

FEATURES

| System Features | | Sound Source Playback |

Saving space for installation and budget

It has most of the functions and diversiﬁed sound sources in an existing broadcasting system with only one unit, which can economize an installing space and cut down on budget. (Built-in function : TUNER / MEDIA (CD, DRP, USB) / ES/ PS / PX / AMP / RG)

Simultaneous broadcasting of different 2 groups

Mounted two ampliﬁers (120W + 120W) with high impedances offer a BGM broadcast with two different sound sources by dividing Group A and Group B. Full Digital Ampliﬁer adopted in the system reduced the whole weight, a power consumption and a temperature increase in operation.

System extension function

It is convenient to expand the system as the sound source can be shared through LINK-IN/OUT terminal, which 4 units of SLAVEs at maximum can be connected through additionally. (MASTER 1unit, SLAVE 4unit)

Digital processing & digital ampliﬁer

Adopting the full Digital Ampliﬁer enables to lower overall weight, power consumption and temperature rise during operation.

Various sound sources

FM tuner and CD/USB/DRP (ﬂash memory) player are mounted, and there is AUX (1, 2) and OPTICAL (IN/OUT). You can conveniently use various source. (CD-MA, MP3, WMA)

CD Playback and copy (saving the lifetime of the CD mechanism)

This function is used to copy music in a CD into inner memory or USB memory. You can greatly save the lifetime of the CD mechanism.

USB Playback and copy

Recording contents of a CD in USB memory and playing contents of USB memory is available.

Built-In memory (DRP) playback and copy

The contents of DRP memory can be played. After copying the sound source making frequent use in a CD or USB, you can continue to use without playing the different source and copy to USB as well.

Chime function

Convenient to use to guide broadcasting before or after broadcasting since it is built-in 2 kinds of chime.

Selectable for the 24 channel zones

The system provides 24 channel zone selection, which can be controlled by 2 groups. Total zone can be expanded up to 120 channels by system expansion.

Fire detection and emergency broadcasting

The system provides 24 channel sensor input terminals for automatic ﬁre alarm broadcasting. It also provides the recording function of ﬁre alarm message for ﬁre alarm broadcasting.

SR-100 Remote Mic

4unit of SR-100 remote MIC at maximum can be connected with 1unit of system. SR-100 connected to RM-1 terminal is available to expand up to 120 zone with 8unit of SR-100KP keypad (12 zone per 1unit).

Compatible with input port

5 channel of XLR input terminal are selectable to receive all of MIC and LINE signal. It is possible to connect with various input signal since all of 5channel provides phantom power.

External equipment control

It provides PD/ EM terminal to control external equipment. So you can control the operation of external equipment by using output contact from EM terminal in emergency mode and from PD terminal during broadcast output.

Emergency power and battery charging

The system provides the battery connecting terminal and the battery charging function to supply the emergency power.

| User Convenience |

PC Program support

With the PC program supplied additionally, It is easy to control the front panel functions of the system

PC Reseravation broadcast

It is the function that is available only in PC program which is of timer playback function that outputs a sound source stored in PC to corresponding area.

MIC Priority

It is possible to broadcast priority without work by blocking the signal of different channel automatically since MIC 1channel is high priority.

Built-in monitor speaker

You can check broadcast output status through a monitor speaker as it has a built-in monitor speaker. You can control the monitoring level aside from main output volume.

EM Mic

The system provides the EM MIC which is installed on the front panel. It is easy to use the EM MIC for ﬁre alarm broadcasting.

EQ Mode

You can correct the frequency of all broadcasting source including BGM, which output from the selective button of EQUALIZER MODE and VOLUME CONTROL button .

Support with remote control

You can use AMX or CRESTRON control system with this interface by RS-232 port.

Digital 2bus PA Combination System

Page 3

PAC-5000

FRONT / REAR PANEL

Power switch

Group a/b button

Normal/emergency button

Speaker zone selection button

Siren button

Monitor speaker selection button

Chime button

Emergency broadcasting test button

Input display led

Input selection button

Mic selection button and display led

15 16

Input level volume

Main volume

Volume adjust selection button

Disc tray

Eject button

Usb terminal

Em mic and operating switch

Cd, drp, usb selection button

Group button

Random button

Repeat button

19 20

21 22

23 24

2628272926

Cd, Drp, Usb Copy Button

Delete Button

Display

Track/Frequency Selection Button

Tune Exploration/Frequency Move Button

Playback/Pause / Fm Mute Button

Stop/Frequency Saving Button

Number Input Button For Track/Frquency

System Operational Indicator

(Em, Fire, Pc, Rm, Bgm)

Power input (ac inlet)

Dc power input and battery charge terminal

Speaker output terminals

Amp output / input terminal

Ex chime / fire com terminal

Control out terminal

Unswitched ac power input terminal

Main power switch

SR-100 SR-100KP

10 13

Post output terminal

Rs-232

Remote mic connecting terminal

Line/mic input terminal and input selection switch

Link in/link out terminal

Address setting switch

Rec mic input terminal

Aux input terminal

terminal

15 16 17

19 20

Rec output terminal

Fm antenna terminal

Em rec button

Pc audio input terminal

Fire sensor input terminal

Contact/audio input terminal

| Remote MIC |

ㆍsupply data, audio, dc power with one cat 5 cable ㆍable to use 24 channels basically, when the expasion key Pad is added you can able to use 120 channels ㆍ built-in chime source ㆍ whole zone broadcasting and monitoring ㆍ exterior source delivery through rear aux terminal

Digital 2bus PA Combination System

Page 4

PAC-5000

SPECIFICATIONS / DIMENSIONS

| Speciﬁcations |

POWER AMP (AUX IN @ 1kHz, 100V/83Ω LOAD OUTPUT)

PAC-5000

Rated Output (@ T.H.D 1%, GROUP A + GROUP B) 120W + 120W

Input Sensitivity -10dBV / 10kΩ

S/N (20kHz LPF, A-WTD) Better than 75dB

EQ Control (250Hz, 1kHz, 7kHz) ±10dB

Frequency Response (1W Power Output, ±3dB) 100Hz-18kHz

MIC/LINE 1~5CH (MIC/LINE IN @ 1kHz, POST OUT, MIC/LINE VR Max. Master VR Max.)

MIC Input Sensitivity -55dBV / 10kΩ

MIC S/N (20kHz LPF, A-WTD) Better than 55dB

MIC Frequency Response (±3dB, 80kHz LPF) 120Hz-10kHz

MIC Phantom Power +24V

MIC T.H.D (20kHz LPF) Less than 0.5%

LINE Input Sensitivity -10dBV / 10kΩ

LINE S/N (20kHz LPF, A-WTD) Better than 65dB

LINE T.H.D (20kHz LPF) Less than 0.3%

CD (TEST CD 0dB, 1kHz @ REC OUT, CD VR Max. Master VR Min.)

S/N (20kHz LPF, A-WTD) Better than 80dB

Frequency Response (±3dB, 80kHz LPF) 100Hz-20kHz

TUNER (FM, 22.5kHz MOD @ REC OUT, TUNER VR Max. Master VR Min.)

S/N (20kHz LPF, A-WTD) Better than 60dB

Frequency Response (±3dB, 80kHz LPF) 120Hz-12kHz

OUTPUT LEVEL (AUX IN, INPUT -10dB/1kHz)

REC OUT (AUX VR Max. Master VR Min.) -10dBV / 600Ω

POST OUT (AUX VR Max. Master VR Max.) 0dBV / 600Ω

LINK IN/OUT , REMOTE MIC (RM 1~RM 4) INTERFACE

Conﬁguration RS-485 Serial

Interface Distance ≤200M

Cable Type Category 5 UTP Cable

Priority Control EM > FIRE > PC AUDIO > REMOTE MIC > MIC 1, SIREN, CHIME > MIC 2~5, BGM

Fire Sensor 24CH

Operation temperature -10°C ~ +40°C

Power Source AC 220V 60Hz, DC 24V

Power Consumption 750W

Weight (SET) 16kg / 35.3lb

Dimension (SET) 482(W) × 177(H) × 373(D)mm / 19(W) × 7(H) × 15(D)in

| Dimensions |

440mm

482mm

177mm

Inter-M Corp. (IMK)

653-5 Banghak-Dong, Dobong-Ku, Seoul, Korea Overseas Sales Team

Tel_ +82-2-2289-8141~7 Fax_ +82-2-2289-8149 E-mail_ overseas@inter-m.com www.inter-m.com

* Design and speciﬁcation are subject to be changed without pre notice.

373mm