Inter-M CR-600RM User Manual
CT/CR-600ECS,
12
12
1 23
CT/CR-600RM
Features
- This product is the optional module which adds the
control signal transfer function for the ITX/IRX
Series, FTA/FRA-108S.
- Simple Installation
Easy installation is possible because there is a
installation slot in the set.
- Applied Equipment
• CT-600ECS : FTA-108S, ITX-108, ITX-102
• CR-600ECS : FRA-108S, IRX-108, IRX-102
• CT-600RM : FTA-108S, ITX-108, ITX-102
• CR-600RM : FRA-108S, IRX-108, IRX-102
Front Panel and Rear Panel
- CT-600ECS
1. Link In Terminal
It is connected with LINK OUT terminal of 6000
system.
2. Dry Contact Input Terminal
This is dry contact signal input terminal.
※Compatible Equipment:
FTA-108S, ITX-108, ITX-102
- CR-600ECS
1. Link Out Terminal
It is connected with LINK IN terminal of 6000 system.
2. Dry Contact Output Terminal
This is dry contact signal output terminal.
※Compatible Equipment:
FRA-108S, IRX-108, IRX-102
- CT-600RM
1. RM In Terminal
It connects RM-6024(REMOTE MIC) or RME-6108(RM
EXTENDER)
2. Audio Output Terminal
It outputs voice signal transmitted from remote mic input
terminal. It is connected with input terminal of FTA108S, ITX-108 and is able to transmit voice signal.
3. Dry Contact Input Terminal
This is dry contact signal input terminal.
※Compatible Equipment:
FTA-108S, ITX-108, ITX-102
CT/CR-600ECS,
RM1
INPUT
AUDIO
OUT
AUDIO
OUT
RM2
INPUT
LINK IN LINK OUT UPGRADE
SOURCE 1
RS 232
SOURCE 2
EMG PANEL
/
ADDRESS
12 34 5 6 7 8 9 10
1234 5678
9 10 11 12 13 14 15 16
1234 5678
9 10 11 12 13 14 15 16
TERM.
LOAD OPEN
12345678
9 1011 12 1314 15 16
FIRE
SENSOR
SPEAKER
OUTPUT
AMP
INPUT
HEHCEC EHCEHC EEH CEHCEHC HC HCHCHCHC HCHCHCHC
PD TIMER
EXTCOM
DC 24V
ECS-6216P
FTA-108S/ITX-108/ITX-102
R
M-6024 + RM-6012KP(x2)
<ADDRESS SETTING: 9>
FRA-108S/IRX-108/IRX-102
OPTIC CABLE
or
UTP CABLE
++
RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8
INPUT
OUTPUT
ᩡ⠑@⡁♥@⠉⅖⠉@⠝⟙@❅@ಥ⢙@ᚥጩ㛩⡁⟭@➙㙭⠉@⠝⟑፝@
⼥ộᇌ⟙@⚉അᄭ@ᅉḕᨑ@ᩡ⩕⩕@ᩝ⎂⍱⚹N
DC 24V
R
M-6024/RM-6012KP
RME-6108
OR
8대
DRY CONTACT
INPUT EQUIPMENT
DRY CONTACT
OUTPUT EQUIPMENT
1 23
RM1
I
NPUT
AUDIO
OUT
AUDIO
OUT
RM2
I
NPUT
LINK IN LINK OUT UPGRADE
S
OURCE 1
R
S 232
S
OURCE 2
EMG PANEL
/
A
DDRESS
1
23 45 6 7 8 910
1
2345678
9
10 11 1213 14 15 16
1234 5678
9
10 11 1213 14 15 16
TERM.
L
OAD OPEN
1
2345678
9 1011 12 1314 15 16
FIRE
SENSOR
SPEAKER
OUTPUT
AMP
INPUT
HEHCEC EHCEHC EEH CEHCEHC HC HCHCHCHC HCHCHCHC
P
D TIMER
E
XTCOM
DC 24V
ECS-6216P
INPUT OUTPUT
I
NPUT OUTPUT
LINE
LINK
TERM.
O
PEN
L
OAD
GND.
F
LOAT
F
RAME
F
TA-108S/ITX-108/ITX-102
FRA-108S/IRX-108/IRX-102
DRY CONTACT
INPUT EQUIPMENT
D
RY CONTACT
OUTPUT EQUIPMENT
OPTIC CABLE
or
UTP CABLE
CT/CR-600RM
- CR-600RM
1. RM Out Terminal
It outputs RM data transmitted from CT-600RM.
2. Audio Input Terminal
It inputs voice signal outputted with FRA-108S, IRX-108,
IRX-102. Input signal is transmitted to the following
equipment with RM signal via UTP cable.
3. Dry Contact Input Terminal
This is dry contact signal input terminal.
Connection Chart
CT/CR-600ECS
-
※Compatible Equipment:
FRA-108S, IRX-108, IRX-102
Connection Chart
- CT/CR-600RM
Specifications
CT-600ECS, CR-600ECS,
CT-600RM, CR-600RM
Transmission LINK/RM RS-485
Method Dry Contact DRY CONTACT
Power Source +5V, +24V
(Input from the main device)
Operation Temperature
Weight(Set)
Dimensions(Set) 8
3.3(W) x 1.42(H) x 5.12(D)in
Cautions
1. Make sure to switch off the power of equipment
when inserting a module.
2. Make sure to check support equipment when
inserting a module.
(CT-600ECS/RM can be used with the transmitter
FTA-108S, ITX-102/108 and CR-600ECS/RM can
be used with the receiver FRA-108S, IRX-102/108)
–10°C ~ 40°C
250g/0.55lbs
4(W) x 36(H) x 130(D)mm/
No. 133927
Loading...