Inter-m CMX-1242, CMX-1642 User Manual

Phantom power +48VDC
Power source AC 120VAC @ 60 Hz
Description
The CMX-1242 and CMX-1642 are high-performance professional mixing consoles well-suited for permanent installations and on-the-road use. Both the 12 and 16 channel versions feature 120 degree connectors from the unit surface for convenient installations.
Each channel has both XLR and
Features
Low noise and high fidelity
12, 16 channel inputs
4 Aux sends per channel
3-Band EQ (with variable mid­range frequency)
Mic/line input selector switch
80mm fader
2 Stereo aux/return with AFL switches
Tape in and record out
Balanced mono out
+48VDC phantom power
10-Segment level meter
T/R/S that is switch-selectable to add to the flexibility of the inputs. Input gain on each of the channels range from a -60 dB microphone to a +4 dB line level signal while three band EQ with mid sweep adds to the clarity of each channel. There are four auxiliaries on each channel for use as either a monitor or an effects loop, and a pan pot is provided for assignment to the submains and/or the mix masters.
Phantom power is provided globally to all channels while 80 mm Panasonic slide faders provide accurate and smooth channel control.
The master section provides 2 busses with assignment to the stereo mix master as well as a mono output for driving near field monitors, or additional fills for larger format P.A. applications. Two stereo AUX returns drive directly into SUB MASTERS via pan pots and assign switches.
The CMX-1242 and CMX-1642 are powered by 120VAC @ 60 Hz.
2-Bus Mixing Consoles
CMX-1242/1642
line chan -20 dB/10 k ; Unbalanced; 1/4"
Maximum voltage gain 84 dB to L/R, mono Input channels mic -60 dB @ 5-600 ; Balanced; (XLR)
Technical Specifications
Frequency response 20 Hz to 20 kHz (+1/-2 dB @ 600 all outputs)
Mon. output +4 dB/600 ;Unbalanced; 1/4"
Main outputs +4 dB/600 ; Balanced; XLR Aux send +4 dB/600 ;Unbalanced; 1/4"
Headphone out 30mV @ 40
Dimensions (W x H x D) 20.5"(520 mm) x 4.29"(109 mm) x 20"(509 mm) 24.9"(632 mm) x 4.29"(109 mm) x 20"(509 mm)
Weight 26.4 lbs (12 kg) 31 lbs (14 kg)
Rec. out -10 dBV/10 k; Unbalanced
GENERAL
THD rated @ +14 dB output < 0.1% 20 Hz to 20 kHz
ELECTRICAL CMX-1242 CMX-1642
Power consumption 31 W 36 W
Hum and noise -127 dB
CMX-1242 shown
Both the 12 and 16 channel versions of the mixing console shall feature 120 degree connectors from the unit surface. Each channel shall have both XLR and T/R/S that is switch-selectable. Input gain on each of the channels shall range from a -60 dB microphone to a +4 dB line level signal while three band EQ with mid sweep shall add to the clarity of each channel. There shall be four auxiliaries on each channel for use as either a monitor or an effects loop, and a pan pot shall be provided for assignment to the submains and/or the mix masters.
Phantom power shall be provided globally to all channels while 80 mm Panasonic slide faders shall provide accurate and smooth channel control.
The master section shall have two busses with assignment to the stereo mix master as well as a mono output for driving near field monitors, or additional fills for larger format P.A. applications. Two stereo AUX returns shall drive directly into SUB MASTERS via pan pots and assign switches.
The mixing console shall meet the following performance criteria:
Frequency response shall be from 20 Hz to 20 kHz (+1/-2 dB @ 600 all output s); total harmonic distortion shall be less than 0.1% 20 Hz to 20 kHz rated @ +14 dB output ; and hum and noise shall be -127 dB. Phantom power shall be +48VDC.
The power source shall be 120VAC @ 60 Hz.
The power amplifier shall be an InterM model __________________ [CMX-1242 or CMX-1642].
CMX-1242/CMX-1642 Architectural and Engineering Specifications
CMX-1242 Front & Rear Views
Specifications subject to change without notice.
E&OE
' Burtek Systems Inc.
97013081419971200 Printed in Canada
Available from:
interM
Dallas, Texas Tel (903) 455-2001 800-233-5014 Fax (903) 455-2233 Vancouver, BC Tel (604) 291-8401 800-663-1042 Fax (604) 294-2697
Loading...