CLA
S E R I E S
Professional Line Array
Speaker System
CLA-8A
Dual 8” 2-Way, Bi-amp Line Array
CLA-18SA
Compact 18” Subwoofer
CLA-5
Dual 5” 2-Way, Bi-amp Line Array
CLA-15S
Compact 15” Subwoofer
518mm
CLA-8A
S E R I E S
The CLA-8A is a Dual 8” 2-way Line Array speaker system
that will fill in a space from a small theater to a large
stadium, with a high level of straightness, constant frequency
response, and a stable sound pressure.
268.8mm
523mm
800mm
800mm
FRONT
518mm
CLA-8A
TOP
672mm
CLA-18SA
FRONT
TOP
CLA-8A FRAME
* Feature
CLA-8A
ㆍSimple and quick integration system
ㆍ120 degree, wide horizontal range
ㆍCombinable Multi-purpose 18” Subwoofers
ㆍGround stack feature
ㆍHigh practicality and quality components
ㆍDual 8” high power LF driver paired with
v-shape sonic diffractor screen
ㆍPrecise wave guide for each 75mm voice coil
compressor driver
CLA-18SA
ㆍ18” compact subwoofer speaker
ㆍ130dB SPL maximum output
ㆍSuspended or combined with Ground Stack for
CLA-8A
CLA-8A FRAME
ㆍDedicated for CLA-8A and CLA-18SA either
flying or stacked
* Application
ㆍWhere excellent sound effects such as high quality, good sound output, exact coverage and
clarity are required
ㆍWhere multi-purpose sound systems are needed
ㆍPortable Live / Touring concert systems for small or large place
CONA CLA-8A and CLA-18SA are designed for
professionals who demand easy installation and
excellent sound effects at the same time.
CONA CLA Line-up is composed of CLA-8A Full Range Speakers and CLA-18SA subwoofers. With CLA-8A-line
source components, operating in a frequency bandwidth of the response within 80Hz~18KHz which can be
extended to 40Hz with additional CLA-18SA subwoofer. 2way, bi-amplified CLA-8A uses dual 8” high power
low driver which exceeds total frequency range and generates 120 degree horizontal symmetric distribution
without a secondary protrusion thanks to the utilized bass-reflex interior, coupled with v-shaped sonic diffractor screen. Each 8” high power low driver is equipped in a separate space that enforces compartment and
eliminates internal conflicts. At high frequencies, a premium 75mm voice coil compressed driver matches appropriate waves to perform a precise and soft line array effect. The V-shaped sonic diffractor / screen combination along with the wave guide allow CLA-8A line source to bend the wavefront for each component up to
10 degrees without inter-element coupling to break up. The internal center of CLA-8A is constructed with 1st
grade Baltic white birch veneer while the top and the bottom is aluminum to insure the mechanical perfection.
The 4-point simple and rapid integration equipment system supports up to 24 CLA-8A-element arrays. CONA
CLA-18SA subwoofer sub-base achieves the highest possible pressure and Hi-fidelity sound. High Linear
Tendency enables CLA-18SA equipped with the custom 18” transducer to draw maximum 2400w output. The
separate Bass Duct interior is designed to reduce frictions as well as the distortions by the rapid movements.
This specialized duct is an essential component of CLA-18SA. CLA-18SA is installed either suspended or
stacked.
CLA-5
518mm
TOP
TOP
672mm
FRONT
523mm
800mm
FRONT
268.8mm
800mm
518mm
TOP
672mm
FRONT
523mm
800mm
S E R I E S
The CLA-5 Line Array System is a modified Dual 5” 2-way Line
Array speaker system that will fill up a small theater,
general auditorium, or a small to mid-sized hall. Since this
system has a high level of straightness that controls reverb
for a clear speech delivery.
562mm
89.4mm
FRONT
562mm
520mm
TOP
510mm
311mm
CLA-5
CLA-15S
FRONT
TOP
CLA-5 FRAME
* Feature
CLA-5
ㆍIntegrated system for a quick and easy
installation
ㆍ120 degree, wide horizontal range
ㆍCombinable Multi-purpose 18” Subwoofers
ㆍGround stack feature
ㆍHigh practicality and quality components
ㆍSound optimized enclosure design
CLA-15S
ㆍ15” Compact Subwoofer Speaker
ㆍAccurate bass playing
ㆍSuspending or integrated Ground Stack for
CLA-5
* Application
CLA-5RACK6, CLA-5RACK10
ㆍRack Type System for Amp, Processor, and
Connection panel mounting
ㆍShort distance between the Amp and
Speaker to minimize cable loss
ㆍIncreases Damping Factor by minimized
source loss
ㆍSignal Processor allows remote control
through Ethernet
ㆍRack-type Box can save space and achieves
aesthetic effect, as well
CLA-5FRAME
ㆍSpecialized for CLA-5 and CLA-15S either
Flying or Stack installation
ㆍWhere excellent sound effects such as high quality, good sound output, exact coverage and
clarity are required
ㆍWhere multi-purpose sound systems are needed
(churches, performance halls, theaters, Gyms, open courts)
ㆍOptimized for venues and events such as religious institutions or organizations as the main
CONA CLA-5 and CLA-15S are designed for
professionals who demand easy installation and
excellent sound effects at the same time.
CONA CLA-5 and CLA-15S are designed for professionals who demand easy installation and excellent sound
effects at the same time. New CLA-5 series from CONA is composed of Dual 5” CLA-5 Full Range Speakers
and 15” single CLA-15S Subwoofer Speakers, along with the special Flying Amp Rack. With CLA-5 line array,
operating in a frequency bandwidth of the response within 80Hz~18KHz which can be extended to 40Hz with
additional CLA-15S. CLA-5 utilizes a 2way, bi-amplified dual 5” high power low drive. And this bass-reflex
interior, coupled with v-shaped sonic diffractor screen, generates 120 degree horizontal symmetric distribution
without a secondary protrusion. With CONA’s own HRT(Horn Rectify Technology), the wave guide accompanied by the Premium 44mm Voice Coil Compressor Driver plays accurate but smooth bass. A maximum 10
degrees of direction adjustment allows versatile aiming patterns. The interior of CLA-5 series is constructed
with 1st grade Baltic white birch veneer and aluminum to insure an easy installation either stacked or
suspended. The specially designed Amp Rack is optimal where only a small space is available, but a better
sound is needed. Flying configuration with the Amp Rack, can save a considerable wiring cost by reducing
enormous length or cables, which eliminates signal loss leads to a high Damping Factor of Sound Effect.
CLA-8A, CLA-18SA CLA-8A, CLA-18SA
V2-3000 (MID)
V2-3000 (LOW)
V2-3000 (HIGH) V2-3000 (MID)
V2-3000 (LOW)
Power Amplifier
KEN-424
Processor
CSP-4.8
Audio Mixer
Preset 01
4 x 2-way Crossover
* CLA-8A Series System
V2-3000 (MID)
V2-3000 (LOW)
CLA-8A, CLA-18SA CLA-8A, CLA-18SA
V2-3000 (HIGH) V2-3000 (MID)
Power Amplifier
Preset 01
4 x 2-way Crossover
CSP-4.8
Processor
KEN-424
Audio Mixer
V2-3000 (LOW)
* CLA-5 Series System
V2-3000
V2-2000
Preset 01
4 x 2-way Crossover
CSP-4.8
Preset 01
4 x 2-way Crossover
CLA-5RACK6
Power Amplifier / Processor
KEN-416
Audio Mixer
CLA-5, CLA-15S CLA-5, CLA-15S
* CLA-8A Specifications
CLA-18SA
Ohm
200
100
90
80
70
60
50
40
30
20
10
9
8
7
6
50 100 200 500 1K 2K 5K 10K 20K20Hz
dB SPL
110
100
90
80
70
60
50
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
CLA-5 CLA-15S CLA-8A
20Hz 50 100 200 500 1K 2K 5K 10K 20K
100
90
80
70
60
50
40
30
20
10
9
8
7
6
Ohm
100
90
80
70
60
50
40
30
20
10
0
-10
-20
20Hz 50 100 200 500 1K 2K 5K 10K 20K
dB SPL
Ohm
200
100
90
80
70
60
50
40
30
20
10
9
8
7
6
50 100 200 500 1K 2K 5K 10K 20K20Hz
dB SPL
110
100
90
80
70
60
50
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
Ohm
600
500
50 100 200 500 1K 2K 5K 10K 20K
200
100
50
20
10
20Hz
dB SPL
110
100
90
80
70
60
50
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
CLA-18SA
CLA-18SA
Ohm
200
100
90
80
70
60
50
40
30
20
10
9
8
7
6
50 100 200 500 1K 2K 5K 10K 20K20Hz
dB SPL
110
100
90
80
70
60
50
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
Ohm
600
500
50 100 200 500 1K 2K 5K 10K 20K
200
100
50
20
10
20Hz
dB SPL
110
100
90
80
70
60
50
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
Type Dual 8" 2-Way, Bi-amp Line Array
Frequency Response (-10db) 80Hz-18kHz
1.4" Exit, 75mm Voice Coil, Compression driver with the wave
guide provides smooth horizontal directivity and vertical line source
HF_75W(AES) / 300W(Peak), LF_300W(AES) / 1200W(Peak)
98dB (At 100/200/400/800/1600/3200/6400/12800Hz Average)
Integral, Side Bar Adjustable Rigging System, Vertical
Splay Adjustable in 1deg, Increments from 0-10deg
CLA-8A
CLA-18SA
Transducers
High Frequency
Low Frequency Dual 8" Woofer with Separated Chamber
Power Handling
Sensitivity (1W/1M)
Maximum Output 123dB SPL
Norminal Impedance HF_16Ω, LF_16Ω
Recommended Crossover 80Hz, 1680Hz
Norminal Dispersion (-6dB) H_120deg / V_10deg
Connector 2x NL4 in parallel, 1+/1-_HF, 2+/2-_LF
Enclosure Material 15mm Plywood, Black coat
Rigging
Weight (Net/Shipping) 34Kg / 37Kg
Dimensions 800(W) X 518(D) X 268.8(H)mm
Type Compact 18" Subwoofer
Frequency Response (-10db) 45Hz-300Hz
Transducers 18" Woofer
Power Handling 600W(AES) / 2400W(Peak)
Sensitivity (1W/1M) 100dB
Maximum Output 134dB SPL
Norminal Impedance 8Ω
Connector 2x NL4 in parallel, 1+/1-
Enclosure Material 18mm Plywood, Black coat
Rigging Integral
Weight (Net/Shipping) 42.3Kg / 45.3Kg
Dimensions 800(W) X 672(D) X 523(H)mm
CLA-8A
Frequency
Response
CLA-8A
Impedance
VS. Respone
CLA-18SA
Frequency
Response
CLA-18SA
Impedance
VS. Respone
110
100
90
80
70
60
50
dB SPL
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
600
500
200
100
Ohm
50
20
10
50 100 200 500 1K 2K 5K 10K 20K
20Hz
110
100
90
80
70
60
50
dB SPL
40
30
20
10
0
-10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
200
100
90
80
70
60
50
40
30
Ohm
20
10
9
8
7
6
50 100 200 500 1K 2K 5K 10K 20K20Hz
* CLA-5 Specifications
Type Dual 5" 2-Way, Line Array
Frequency Response (-10db) 125Hz-20kHz
Transducers
High Frequency
1" Exit, 44mm Voice Coil, Compression driver with the wave guide
provides smooth horizontal directivity and vertical line source
Low Frequency Dual 5" Woofer with Separated Chamber
Power Handling
Sensitivity (1W/1M)
HF_45W(AES) / 180W(Peak), LF_100W(AES) / 400W(Peak)
96dB (At 100/200/400/800/1600/3200/6400/12800Hz Average)
Maximum Output 122dB SPL
CLA-5
Norminal Impedance HF_16Ω, LF_16Ω
Recommended Crossover 125Hz, 3450Hz
Norminal Dispersion (-6dB) H_120deg / V_10deg
Connector 2x NL4 in parallel, 1+/1-_HF, 2+/2-_LF
Enclosure Material 12 / 15mm Plywood, Black coat
Rigging
Integral, Side Bar Adjustable Rigging System, Vertical
Splay Adjustable in 1deg, Increments from 0-10deg
Weight (Net/Shipping) 11Kg / 12.5Kg
Dimensions 562(W) X 311(D) X 189.4(H)mm
CLA-15S
Type Compact 15" Subwoofer
Frequency Response (-10db) 45Hz-350Hz
Transducers 15" Woofer
Power Handling 450W(AES) / 1800W(Peak)
Sensitivity (1W/1M) 98dB
Maximum Output 131dB SPL
Norminal Impedance 8Ω
Connector 2x NL4 in parallel, 1+/1-
Enclosure Material 15mm Plywood, Black coat
Rigging Integral
Weight (Net/Shipping) 20Kg / 22Kg
Dimensions 562(W) X 510(D) X 520(H)mm
CLA-5
Frequency
Response
CLA-5
Impedance
VS. Respone
CLA-15S
Frequency
Response
CLA-15S
Impedance
VS. Respone
120
110
100
90
80
70
60
dB SPL
50
40
30
20
10
0
20Hz 50 100 200 500 1K 2K 5K 10K 20K
300 180
200
100
90
80
70
60
50
Ohm
40
30
20
10
20Hz 50 100 200 500 1K 2K 5K 10K 20K
100
90
80
70
60
50
40
dB SPL
30
20
10
0
-10
-20
20Hz 50 100 200 500 1K 2K 5K 10K 20K
100
90
80
70
60
50
40
30
Ohm
20
10
9
8
7
6
20Hz 50 100 200 500 1K 2K 5K 10K 20K
150
120
90
60
30
Deg
0
-30
-60
-90
-120
-150
-180
* CSP-4.8 Signal Processor
Preset 01
4 x 2-way Crossover
CSP 4.8 is 4-input & 8-output digital signal processor system and it is available
high-quality audio processing.
Preset 01
4 x 2-way Crossover
PUSH PUSH PUSH PUSH
A B C D
Inputs
1 2 4 5 6 7 8
Outputs
USB
3
RS-232
Dataport
ㆍ4 in, 8 out Digital Signal Processor
ㆍIntuitional user interface
ㆍDSP Function : Gain, Parametic EQ, Filter, Time delay, Crossover, Compressor, Limiter, Matrix
ㆍFree In / Out assign
ㆍControl by front panel or PC
ㆍUSB, RS232 interface (Apply to PC control and Preset value provided front panel USB port)
ㆍXLR balance audio in / output
ㆍIn / Output Delay adjustable to 682ms
ㆍ24 bit, 48 khz delta-sigma A/D Converter
ㆍ2 x 20 Character LCD Front Panel - Channel, Function setting
ㆍOffer software only for CSP 4.8
ㆍ1U size
* V2 Series Professional Power Amplifier
On
1
0
MADE IN USA
BY ASHLY AUDIO
CONA V2 Series is High quality power amplifier by means of Switching Mode Power
Supply type.
ㆍ2U Size, 10kg rated Light Weight
ㆍClip Limiter with built in HPF
ㆍ380 or more DAMPING FACTOR and Low THD (0.05%)
ㆍS / N ratio 107dB or more
Output V2-1000 V2-2000 V2-3000 V2-4000 V2-5000
8Ω 170W 280W 500W 700W 1000W
4Ω 300W 500W 900W 1200W 1700W
* Other CONA Brand Products
The goal of CONA outboard products is to meets the requirements of pro-Audio market, at an affordable price.
ㆍCLN-200 Dual Channel Compressor / Gate ㆍPEQ-105 Parametric Equalizer
ㆍHigh-quality Compressor for Studio recording and live
sound applications
ㆍDual channel compressor limitter with finely adjustable
settings
ㆍDynamic curve selection of hard knee / soft knee
ㆍStereo linl switcher
ㆍ8 Dot output led meter
ㆍNOISE DUAL NOISE GATE useful for Clear sound
delivery and Noise Reduction
ㆍGEQ-131 / 231 31 Band Graphic Equalizer
ㆍ5-band Independent parametric functions, for Center
Frequency of each band, Gain, and Bandwidth
adjustments
ㆍEQ-BYPASS switch for each band and LED to easily
identify performance of each band
ㆍMaster EQ BYPASS feature by a single action
ㆍLED peak level Warning for excessive INPUT / OUTPUT
level
ㆍDIB-100 Direct Box
ㆍStereo 31-band graphic equalizer (GEQ-231)
ㆍMono 31-band graphic equalizer (GEQ-131)
ㆍ1 / 3 Octave Constant-Q circuitry Application
ㆍSelectable GEQ ranges ± 12dB, ± 6dB
ㆍLow Range Screen for Rumble removal
ㆍWide frequency response
ㆍHard bypass circuit
ㆍActive type run by 9V battery or +48 V
phantom power
ㆍHigh Impedance FET input
ㆍHigh-quality support by Transmitter output
ㆍInstalled source changeover switch makes
Guitar Amp simulation possible
ㆍPAD Switch for High Level Device connection
www.cona.co.kr
Inter-M Corp. (IMK)
Overseas Sales Team, 653-5 Banghak-Dong, Dobong-Gu, Seoul Korea 132-846
Tel : +82-2-2289-8141~46 | Fax : +82-2-2289-8149 | E-mail : overseas@inter-m.com
www.inter-m.com
2012. 01
by
Loading...